Kenmore 66568600891 microwave/hood combo Parts

For Kenmore appliances, we read the full model number as the exact identifier you use to match the correct parts and documentation. On Kenmore microwave/hood combo model 66568600891, the model and serial tag is located behind the microwave oven door on the front frame; use the complete number exactly as shown when looking up parts or the owner's manual.

For Kenmore 66568600891, check these spots first:

• Open the microwave door and look at the front frame area
• Find the model/serial rating plate behind the door
• Write down both the model number and serial number (helpful for correct part revisions)
• Keep the info with your purchase records for faster troubleshooting and parts matching

Kenmore model numbers are typically structured so the early digits identify the source manufacturer and the remaining digits identify the design series and variations. For microwaves, the most important rule is to use the entire model number, not just the first few digits.

• Prefix/manufacturer code: often the first 3 digits (varies by product line)
• Base model series: the next group of digits
• Version/variation: the ending digits (color, feature set, production change)

Microwave/hood combos can have multiple door switch, fuse, venting, and lighting configurations that look similar. Using the complete Kenmore model number helps us match the correct diagrams and parts list the first time.

Last updated: February 2026

Your Kenmore 66568600891 is a microwave/hood combo, not a refrigerator, so it will not list “cubic feet” the way a fridge does. For this model, we use oven capacity (cu. ft.) and you can confirm the exact capacity and specifications in the 66568600891 owner's manual.

Use these reliable options (in order):

• Check the specifications section in the 66568600891 owner's manual for “oven capacity” or “capacity (cu. ft.)”.
• Look for the model and serial number plate on the unit (often behind the door area or on the oven frame); the manual’s “getting to know your microwave oven” section typically shows where this plate is located.
• If you are measuring for fit (cabinet opening, venting, mounting), use the 66568600891 installation guide for the correct installation clearances and venting requirements.

If you were asking about a Kenmore refrigerator’s cubic feet, the fastest methods are:

• Find the rating plate inside the fresh food compartment; it often lists “Total volume” or “Cu. Ft.”
• Look up the refrigerator model number and check the listed capacity.
• Measure the interior (height x width x depth in inches) and divide by 1,728 to estimate cubic feet.

Using the right measurement prevents ordering the wrong appliance type parts and helps you plan correctly for cooking space, cabinet fit, and venting. For example, venting layouts and duct sizing are installation-critical on over-the-range microwaves, and those details are covered in the 66568600891 installation guide.

Last updated: February 2026

This page is for Kenmore microwave/hood combo model 66568600891, not a Kenmore washer. If you are identifying a washer, use the washer’s model/serial tag; if you are identifying this microwave/hood combo, the model/serial rating plate is behind the microwave door on the front frame (see the installation guide).

For a Kenmore washer, check these common tag locations:

• Under the lid around the tub opening (top-load)
• Inside the door opening on the front frame (front-load)
• On the back panel near the power cord (some models)

For Kenmore microwave/hood combo 66568600891:

• Open the microwave door
• Look on the front frame area behind the door for the model/serial rating plate

Record the full model number and serial number exactly as shown.

• Model number (letters and numbers)
• Serial number
• Any suffixes or revision codes

Using the exact model number ensures the parts list and diagrams match your appliance, so you order the correct replacement parts and follow the right troubleshooting steps.

Last updated: February 2026