Poulan PR4218-967063801 gas chainsaw Parts

Poulan and Poulan Pro are closely related brands, but they are not the same product line. For the Poulan PR4218-967063801 gas chainsaw, “Poulan Pro” typically refers to a higher-tier lineup under the Poulan name, often with upgraded features or components compared with standard Poulan models; use the PR4218-967063801 owner's manual to confirm the exact specifications and maintenance requirements for your saw.

In most cases, the difference is about positioning and features, not basic operation:

• Poulan: standard homeowner-focused models
• Poulan Pro: more “pro-style” features (often heavier-duty components or added convenience features)
• Parts and designs can overlap across the two lines
• Model number matters most for correct parts fit
• Maintenance schedules are similar (fuel, chain, bar lubrication, air filter, spark plug)

Use these identifiers to match parts and procedures to your exact chainsaw:

• Model number on the product label: PR4218-967063801
• Bar and chain setup (pitch, gauge, drive link count)
• Starter and clutch style
• Chain brake configuration

Even when Poulan and Poulan Pro models look similar, small design differences can change fit. Matching by model number avoids returns and repeat repairs.

If you’re troubleshooting starting or pull-cord problems, these model-listed parts are often involved:

• Ayp chainsaw recoil starter hub spring 576657801 (starter recoil tension)
• Chainsaw recoil starter pulley kit 594090401 (pulley and recoil assembly)
• Craftsman rope 530021161 (starter rope replacement)
• Chainsaw clutch 530057907 (chain drive engagement)

Brand names can be confusing, but parts fit is determined by the model number, not whether the saw is labeled “Poulan” or “Poulan Pro.” Using the correct PR4218-967063801 parts list helps keep chain lubrication, chain tension, and safety systems (like the chain brake) working as designed.

You can order replacement parts for your Poulan PR4218-967063801 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

On the Poulan gas chainsaw model PR4218-967063801, the model number is printed on an ID label attached to the saw body, most often on the side of the engine housing (motor casing), and sometimes on the back or bottom. Copy every letter and number exactly so you get the right parts and instructions.

Check these common label locations first:

• Side of the engine housing (motor casing)
• Rear handle area or back of the saw body
• Bottom of the saw near the crankcase area
• Near the starter cover or clutch cover area

Model numbers and product numbers can look similar, so we recommend:

• Write the full model number exactly as shown (including dashes)
• Record any additional numbers on the same label (often used for parts lookups)
• Take a clear photo of the label before ordering parts
• Match the label to the format shown in the PR4218-967063801 owner's manual

Using the exact model number ensures the parts list matches your saw’s configuration. That prevents ordering the wrong items, especially for fit-critical components like the starter system, clutch, and chain brake.

After you confirm the model number from the label, order replacement parts from the parts list for PR4218-967063801, or search by model on Sears PartsDirect.

Last updated: February 2026

The most common problems we see on the Poulan PR4218-967063801 gas chainsaw are hard starting or no-start, chain not oiling, chain not moving (clutch or brake related), and starter rope issues. Most fixes start with fuel, spark, and bar/chain lubrication checks; use the PR4218-967063801 owner's manual for the correct procedures and settings.

• Won’t start or starts then dies: stale fuel mix, restricted carburetor, fouled spark plug, or ignition issue
• Chain won’t move at throttle: chain brake engaged, worn clutch, or clutch drum wear
• Chain is dry or smoking: oil pump problem, blocked oiler port, or wrong bar oil
• Starter rope won’t pull or won’t rewind: recoil pulley or spring issue
• Cuts poorly or pulls to one side: dull chain, improper chain tension, or bar wear

• Confirm the chain brake is fully released before testing chain movement.
• Drain old fuel and refill with fresh, properly mixed 2-cycle fuel.
• Inspect and replace the spark plug if it’s fouled; the listed spark plug 585358205 is a common tune-up item.
• Verify bar oil is in the tank; clean the bar groove and oil holes.
• Check chain tension: snug on the bar but still able to pull around by hand (with engine off).

Running a saw with a dragging chain brake, a dry bar, or a slipping clutch accelerates wear on the bar assembly, chain, and engine. Catching these issues early keeps your PR4218-967063801 cutting safely and consistently.

Last updated: March 2026