Owner’s manual
Is it worth buying an electric chainsaw?
Yes, an electric chainsaw is worth buying when you want easy starts, lower noise, and straightforward maintenance for typical homeowner cutting. For the Remington M15014AS electric chainsaw, it is a strong fit for pruning and cutting firewood-sized pieces, as long as you follow the safety and extension-cord requirements in the owner's manual.
When an electric chainsaw is the right choice
Electric models like the Remington M15014AS make sense when your work is close to a power source and you want quick, predictable operation.
- You want push-button starting (no fuel mixing or pull-starting)
- You do light to medium cutting: limbs, storm cleanup, small logs
- You prefer less noise and no exhaust smell
- You are comfortable using an outdoor-rated extension cord
- You want simpler upkeep (no carburetor or fuel system)
When a gas chainsaw is usually a better fit
If your work is heavy-duty or far from an outlet, a gas saw typically matches the job better.
- You cut large diameter hardwood regularly
- You need long run time away from power
- You do frequent felling and bucking all day
- You often work in remote areas
What matters most for performance on the M15014AS
On corded saws, cutting performance is usually limited by chain condition and power delivery.
| Factor | What you will notice | What to do |
|---|---|---|
| Chain sharpness | Sawdust instead of chips; you must force the cut | Sharpen or replace the chain |
| Chain direction/tension | Runs but does not cut; rough cutting | Reinstall correctly; set proper tension |
| Extension cord size/length | Slow running or stalling | Use an outdoor cord with adequate wire gauge |
If your chain is worn or dull, replacing it with the correct match for this model restores cutting speed; the chain 91PX050G is the listed replacement chain for the M15014AS.
Why it matters
Choosing the right saw type reduces kickback risk and fatigue, and it helps you get clean cuts without forcing the tool. The manual also stresses using the saw for cutting wood only and unplugging before servicing, which is especially important on an electric model.
Last updated: February 2026
How big of a tree will a 14-inch chainsaw cut?
A 14-inch bar on the Remington M15014AS electric chainsaw is best for limbing and cutting smaller trees and logs; we treat about 12 inches in diameter as the practical “single-pass” limit. You can cut larger diameters by working from both sides, but control and kickback risk increase.
Practical cutting capacity (what to expect)
- Best range: 4 to 10 inch diameter limbs, brush, and firewood rounds
- Typical max in one pass: about 12 inches (leaves some bar margin for safer control)
- Possible with technique: 12 to 14 inch logs by cutting from both sides
- Not a good match: 16+ inch trunks for regular felling or bucking
- Hardwoods vs softwoods: dense hardwoods effectively “feel bigger” and cut slower
Why bar length is not the whole story
Even with a 14-inch guide bar, real-world capacity depends on chain sharpness, chain speed, and how well the chain is matched and tensioned. The manual also stresses using light pressure and letting the saw do the work, which helps prevent binding and unsafe handling. See the M15014AS owner's manual.
Safe approach if the trunk is near your limit
- Keep the chain from contacting anything before you start the cut
- Use light, steady feed pressure (do not force the saw)
- Plan your stance and keep your body clear of the cutting path
- For larger rounds, roll the log or cut from the opposite side to finish
- Avoid cutting wood that is under tension unless you understand how it can spring back
Quick guide: diameter vs approach
| Tree/log diameter | Recommended approach with a 14-inch saw | Notes |
|---|---|---|
| Up to 10 in. | Single-pass cut | Fastest and most controlled |
| 10 to 12 in. | Single-pass with care | Keep good bar margin |
| 12 to 14 in. | Two-sided cut | Slower; higher pinch risk |
| 16+ in. | Use a longer bar saw | Safer and more efficient |
Why it matters
Staying within the saw’s practical capacity reduces chain pinching, binding, and kickback risk, and it also protects wear parts like the chain and guide bar. If cutting performance drops, a worn or dull chain is the first thing to address; the correct replacement for this model is the chain 91PX050G.
Last updated: February 2026
What are the disadvantages of electric chainsaws?
Electric chainsaws like the Remington M15014AS trade convenience for limits in range and heavy-duty cutting; the biggest disadvantages are cord management (corded models), reduced power for large hardwood jobs, and the need to follow strict electrical-safety practices. For model-specific safety rules, use the M15014AS owner's manual.
Common disadvantages (what you will notice first)
- Limited mobility: a corded saw is only as mobile as your outlet and outdoor-rated extension cord.
- Cord hazards: you must keep the cord away from the moving chain and avoid tripping over it.
- Lower cutting capacity: electric models typically bog down sooner in thick hardwood, long cuts, or when the chain is dull.
- Power-supply sensitivity: long or undersized extension cords can cause low voltage, slow cutting, or stalling.
- Weather limits: do not operate in rain or damp or wet areas.
Corded electric vs gas: quick comparison
| Feature | Electric (corded) | Gas |
|---|---|---|
| Range | Limited by cord length | High mobility |
| Torque for big cuts | Moderate | Higher |
| Maintenance | Lower (no fuel mix) | Higher (fuel, carb, spark plug) |
| Noise and exhaust | Lower, no exhaust | Higher, exhaust present |
| Best use | Yard cleanup, limbing, light-to-medium cutting | Heavy cutting, remote work |
How to reduce the downsides on the M15014AS
- Use outdoor-rated extension cords and match wire gauge to cord length.
- Keep the cord behind you and routed away from the bar and chain.
- Let the chain do the work; forcing the cut increases stalling and wear.
- If cutting turns to sawdust or you must push hard, sharpen or replace the chain (the chain 91PX050G is the listed replacement chain for this model page).
- Unplug the saw before adjustments or service.
Why it matters
Most complaints about “weak” electric chainsaws come from voltage drop (cord issues) or a dull chain. Managing the cord and keeping a sharp chain improves safety, cut speed, and motor life.
Last updated: February 2026
