Craftsman 917376054 lawn mower Parts

The year is identified from the product identification label (model and serial/date code) on the mower, not from the parts list. Model 917376054 is a Craftsman walk-behind mower; use the label on the mower and confirm any date-code format using the documentation for your exact unit in the 917376054 owner's manual.

Where to look for the identification label

On Craftsman walk-behind mowers like model 917376054, the label is typically found in one of these spots:

• On the rear of the mower deck near the discharge area
• On the rear housing near the bagger door area
• On the handle bracket or handle support area
• Near the engine mounting area on the deck

How to use the label to determine the year

Use the label information in this order:

• Record the full model number and serial number exactly as shown.
• Look for a separate date code or a “DOM” (date of manufacture) style marking if present.
• Match the format to the manual for your mower; Craftsman formats vary by production run.

Common label fields (what they mean)

Label item	What it tells you	How it helps
Model number	The mower’s configuration	Confirms you are looking up the right diagrams and parts
Serial number	Unique identifier	Helps narrow production run and revisions
Date code (if shown)	Build date	Provides the year directly

Why the “year” matters for parts

Craftsman can change deck, drive, and handle components across production runs; confirming the identification label helps you order the correct wear items.

• Drive system parts such as the belt 532157769
• Blade and cutting hardware such as the lawn mower blade 532406713
• Control components such as the drive control cable

Why it matters

Getting the correct year or production run prevents mismatched parts, reduces returns, and helps ensure safe operation after repairs.

Last updated: February 2026

Common problems on the Craftsman 917376054 gas walk-behind mower are no-start, loss of power, uneven cutting, excessive vibration, and drive issues. Most are caused by stale fuel, a dirty air filter, spark plug problems, grass buildup under the deck, or a loose blade or worn drive parts; use the 917376054 owner's manual troubleshooting chart to pinpoint the cause.

Most common symptoms and what usually causes them

• Won’t start: out of fuel, stale fuel, water in fuel, disconnected spark plug wire, bad spark plug, control bar not held down
• Loss of power: dirty air filter, cutting too much grass, grass and debris packed under the mower deck
• Uneven cut: worn or bent blade, uneven wheel height settings, deck packed with clippings
• Excessive vibration: loose blade, damaged blade adapter, bent crankshaft (often after hitting an object)
• Self-propel won’t move or slows: drive belt wear, transmission wear, drive control cable out of adjustment

Quick checks we recommend first (fast, low-cost)

1. Drain old gas and refill with fresh fuel (stale fuel is a top cause of hard starting).
2. Check the air filter; clean or replace if dirty.
3. Confirm the spark plug wire is firmly seated; replace the spark plug if fouled.
4. Tip the mower safely and clear packed grass from under the deck (engine off, spark plug wire removed).
5. Inspect the blade and blade mounting hardware; replace a damaged blade with the correct 22-inch blade such as the lawn mower blade 532406713 when needed.

Symptom-to-fix guide

Symptom	Most likely cause	What to do
Engine won’t start	Stale fuel, dirty air filter, bad spark plug	Refresh fuel, service filter, replace plug
Vibrates badly	Loose blade, damaged blade adapter	Tighten blade bolt, inspect blade and adapter
Cuts uneven	Blade worn/bent, wheel heights uneven	Replace/sharpen blade, set wheels evenly
Won’t self-propel	Worn belt or transmission parts	Inspect belt and drive system; replace worn parts

Why it matters

Catching these issues early prevents bigger failures, improves cut quality, and reduces strain on the engine and drive system. For example, running with a loose blade can create vibration that damages the blade adapter and crankshaft.

Last updated: February 2026

On Craftsman walk-behind mower model 917376054, the model and serial number are printed on a decal on the rear of the lawn mower housing. Use that exact model number when ordering parts or checking specifications in the 917376054 owner's manual.

Where to look on model 917376054

Check these common spots in this order:

• Rear of the mower deck or housing (most common on this model)
• Near the rear discharge door area
• On the frame close to the engine mounting area
• On the handle bracket area (less common)

What the label looks like

The decal typically includes both identifiers you need.

Item on decal	What it’s used for	Example format
Model number	Matching parts and diagrams	917.376054
Serial number	Identifying production run	Varies

Tip: Write the numbers down exactly as shown. For this mower, you may see the model printed with a dot (917.376054); when searching parts, it’s commonly entered without the dot as 917376054.

Why it matters

Using the correct model number prevents ordering the wrong blade, belt, or drive parts. Even similar Craftsman 22-inch mowers can use different hardware and drive components, so matching 917376054 keeps your repair accurate and saves time.

If the decal is dirty or hard to read

• Wipe the area with a damp rag and mild soap; dry it fully
• Use a flashlight at an angle to make faded printing easier to see
• Take a close-up photo and zoom in to confirm characters

Last updated: February 2026