Kenmore Elite 79579789901 refrigerator Parts

Kenmore Elite launched as a premium Kenmore line in 1999. For your specific Kenmore Elite refrigerator model 79579789901, the exact year depends on the unit’s manufacture date (from the serial number), which you can confirm using the identification and specifications details in the 79579789901 owner's manual.

How to find the year for model 79579789901

The “Kenmore Elite” name tells you the product line, not the exact build year. The most accurate way to date your refrigerator is by using the serial number on the rating label.

• Locate the model and serial label (commonly inside the fresh food compartment, on a side wall, or near a door opening)
• Write down the full serial number exactly as shown
• Use the serial format guidance in the manual to interpret the manufacture date
• If the label is damaged or missing, check for a secondary label on the rear exterior panel
• Keep the serial number handy when ordering parts like a door switch or water inlet valve

Quick timeline: product line vs. your refrigerator

Item	What it tells you	What it does not tell you
“Kenmore Elite”	The premium product line (introduced in 1999)	The exact year your refrigerator was built
Model number 79579789901	The specific design family and configuration	The exact manufacture date
Serial number	The unit-specific manufacture date code	Nothing about feature packages on other models

Why it matters

Knowing the manufacture year helps us match the correct Kenmore parts and revisions for your refrigerator, especially for electrical items (like a control board or door switch) and water system parts (like valves and tubing).

Last updated: January 2026

A Kenmore Elite refrigerator like model 79579789901 typically lasts 10 to 15 years with normal household use. Consistent cleaning, correct temperature settings, and quick repairs to airflow or water system issues help you reach the high end of that range; major sealed-system failures usually shorten lifespan.

Typical lifespan and what affects it

Most bottom-mount refrigerators land in a predictable range, but real-world life depends on usage and care.

• Typical lifespan: 10 to 15 years
• Heavy use factors: frequent door openings, warm kitchens, overpacked compartments
• Maintenance factors: condenser coil cleaning, door gasket care, keeping vents clear
• Repair timing: addressing small issues early prevents compressor overwork

Maintenance checklist that extends life

Use these habits to reduce compressor run time and prevent common failures.

• Keep refrigerator at 37°F and freezer at 0°F (recommended presets for this model); confirm in the 79579789901 owner's manual.
• Clean condenser coils regularly (dust buildup increases run time and heat).
• Wipe and inspect door gaskets so doors seal tightly.
• Avoid blocking air vents with food containers.
• Replace the water filter when the filter reset indicator comes on.

Quick symptom-to-cause guide

Symptom	Common cause	What to check first
Compressor runs “too much”	Warm room, frequent openings, coils dirty	Coils, door habits, temperature settings
Warm fridge but freezer OK	Airflow restriction or fan issue	Evaporator area for frost, listen for fan
Lights do not turn on when door opens	Door switch not closing circuit	Test/replace refrigerator door switch 6600JB1010A
Water dispenser/ice maker weak	Filter restriction or inlet valve issue	Filter status, water supply, valve

Why it matters

A refrigerator that runs longer than normal uses more energy and puts extra wear on the compressor and fans. Keeping airflow clean and temperatures stable helps the sealed system last longer and reduces expensive breakdowns.

Last updated: January 2026

Kenmore Elite refrigerator model 79579789901 is a bottom-freezer style refrigerator; the exact exterior width, depth, and height vary by the specific 795.7978** version (color number) and installation setup. For the most accurate cabinet dimensions and required clearances, we use the 79579789901 owner's manual.

How to get the right “size” for your space

When customers ask for “size,” we confirm these measurements before ordering parts or planning a move:

• Width: measure the cabinet (not the doors or handles)
• Height: floor to top of cabinet (include hinge cover if it sits higher)
• Depth: cabinet depth, then depth including doors and handles
• Door swing clearance: space needed to fully open doors and freezer drawer
• Ventilation clearance: space behind and above for airflow

Quick measurement checklist (what we recommend)

1. Measure the refrigerator at the widest and tallest points.
2. Measure your opening in three places (top, middle, bottom) to catch out-of-square cabinets.
3. If you have a water line, allow extra room so the tubing does not kink when you push the unit back.

Typical size range for this Kenmore 795 bottom-freezer platform

These Kenmore Elite 795 bottom-mount refrigerators commonly fall into this general range (use this for planning, then confirm with the manual and a tape measure):

Measurement	Typical range
Width	32 to 34 inches
Height	67 to 70 inches
Depth (cabinet)	30 to 33 inches

Why it matters

Correct dimensions prevent door interference, crushed water tubing, poor ventilation (warm temperatures), and installation headaches. It also helps when diagnosing cooling issues because restricted airflow can mimic a failing evaporator fan motor.

Last updated: January 2026

Common problems we see on the Kenmore Elite refrigerator model 79579789901 include weak or no cooling, frost buildup in the freezer, water leaks (puddles), dispenser or ice maker issues, and vibration or rattling. Many fixes start with cleaning, leveling, and checking airflow; then testing key parts.

Most common symptoms and what usually causes them

• Not cooling or warm temperatures: dirty condenser coils, failed evaporator fan, temperature sensor issues, or control problems
• Frost or ice crystals on frozen food: door not closing fully, frequent door openings, or a defrost system problem
• Vibration or rattling noise: refrigerator not level, weak/uneven floor, or cabinet not resting solidly
• Water leaking onto the floor: clogged/iced drain path or drain tube issues
• Ice maker or dispenser trouble: water supply restriction, inlet valve problems, or dispenser drive issues

Quick checks we recommend first (fast, no parts)

1. Confirm installation conditions: the manual calls for an ambient range of 55°F to 110°F and a solid floor to reduce noise and vibration.
2. Clean condenser coils: the manual includes condenser coil cleaning in the care and cleaning section.
3. Level the refrigerator: the front should be slightly higher than the rear to help doors close.
4. Check door closing and gaskets: clean gaskets and the surfaces they touch; a thin coat of paraffin wax can help if gaskets stick.

Parts that commonly solve these problems

If the quick checks do not fix it, these model-compatible parts are often involved:

Symptom	Common part to inspect	Example from this model’s parts
Warm fridge/freezer, poor airflow	Evaporator fan motor	Lg refrigerator evaporator fan motor 4681JB1027C
Frost buildup, warm temps after defrost	Defrost heater	Lg refrigerator defrost heater 5300JK1005D
Water not dispensing, no ice	Water inlet valve	Refrigerator water inlet valve MJX41178908
Lights or dispenser behavior changes when door moves	Door switch	Refrigerator door switch 6600JB1010A

Why it matters

Cooling, frost, and leak symptoms often share the same root causes: restricted airflow, doors not sealing, or water not draining. Fixing the basics (coils, leveling, door seal) prevents food spoilage, reduces energy use, and avoids repeat icing and puddles.

For model-specific troubleshooting steps and the built-in troubleshooting guide, use the owner's manual.

Last updated: January 2026