Kenmore Elite 46513343600 dishwasher Parts

For Kenmore Elite dishwasher model 46513343600, the most reliable “hard reset” is a power reset: turn the dishwasher off at the breaker for about 1 minute, then restore power and start a new cycle using the steps in the 46513343600 owner's manual.

Reset options that work on this model

Use the least invasive reset first.

• Power reset (best hard reset): Switch the dishwasher circuit breaker OFF for 60 seconds, then ON.
• Cancel/Drain reset: Press Cancel/Drain once to stop the cycle and drain; the dishwasher drains and then shuts off.
• Turn off without draining: Press Cancel/Drain twice.
• Restart a cycle: Select a cycle and options, press Start/Resume once, then close the drawer.
• If lights flash after Start/Resume: Close the drawer within 3 seconds after pressing Start/Resume.

Quick “hard reset” checklist

1. Turn the breaker OFF (or unplug if accessible).
2. Wait 60 seconds.
3. Restore power.
4. Press Cancel/Drain once (optional, clears a stuck cycle).
5. Choose a cycle, press Start/Resume, and close the drawer.

What to expect after a reset

What you see	What it usually means	What to do
Unit shuts off after Cancel/Drain	Cycle was canceled and drained	Start a new cycle
Lights flash and alarm sounds	Drawer not closed fast enough after Start/Resume	Press Start/Resume again and close within 3 seconds
Unit turns off while selecting options	30 seconds passed without Start/Resume	Re-select cycle and press Start/Resume

Why it matters

A true hard reset clears a “hung” control state after a power glitch or interrupted cycle. Using Cancel/Drain and Start/Resume correctly also prevents the dishwasher from shutting off due to the built-in 30-second timeout.

Last updated: January 2026

On Kenmore Elite dishwasher model 46513343600, the model and serial number label is located on the side of the dishwasher drawer (inside the unit). Use that label when ordering parts like a control board or water valve, or when checking cycle and option details in the 46513343600 owner's manual.

Where to look on the dishwasher

Check these common spots on this drawer-style dishwasher:

• Open the drawer fully and look along the side wall of the drawer for the rating label
• Use a flashlight; the label can be easy to miss in low light
• Wipe off any film or residue so the numbers are readable
• Record both the model number and serial number for service and parts matching
• Take a clear photo of the label for future reference

What information you should write down

The label typically includes the key identifiers below.

Item	What it’s used for	Example (from your unit)
Model number	Ensures parts fit and diagrams match	46513343600
Serial number	Helps identify production details	From the label
Purchase date	Helpful for maintenance records	Your receipt

Why it matters

We use the model number to match the correct Kenmore Elite dishwasher parts and troubleshooting info. Even small model variations can change components such as the electronic control board, wire harness, or water valve.

Last updated: January 2026

Common problems on the Kenmore Elite dishwasher model 46513343600 usually fall into five buckets: not draining, not starting, poor cleaning, leaking, and poor drying. Many of these issues trace back to maintenance items (filters, spray paths) or safety-related shutoffs (door switch, thermal fuse).

Most common symptoms and what they usually mean

• Won’t drain: food debris in the filter area, a kinked drain hose, or a restriction at the sink/disposer connection.
• Won’t start: door not fully latched, control lock enabled, or a blown safety device.
• Poor cleaning: blocked spray arm holes, overloaded racks, or incorrect detergent amount for your water hardness.
• Leaks: loose hose connections, a mis-seated drawer seal, or a drawer not closing smoothly.
• Poor drying: heater/temperature control issues, rinse aid problems, or venting/airflow problems.

Model-specific maintenance that prevents “mystery” problems

This model uses a coarse filter cup in the drawer that should be checked and emptied when soil remains. The manual also notes the dishwasher should not be started unless the coarse filter cup is securely in place and flush, because running without it can lead to damage and recirculated debris.

• Pull the drawer out fully and make sure it is cool.
• Access and empty the coarse filter cup; wipe the coarse filter plate.
• Confirm the filter cup is seated flush before starting a cycle.
• Use only automatic dishwasher detergent (never hand soap).

For the exact cleaning steps and detergent guidance, use the 46513343600 owner's manual.

Quick part checks (when symptoms match)

Symptom	Common part area	Example part for this model
Not draining	Drain path and hose connection	Drain hose clamp WP596669
Not starting (dead)	Safety cutoff	Dishwasher thermal fuse 99003624
Not drying well	Venting/air movement	Dishwasher vent fan motor assembly WPW10155595

Why it matters

Dishwashers often “act broken” when water flow is restricted or detergent is mismatched to water hardness. Keeping the filter area clean and using the right detergent amount helps prevent poor cleaning, odors, overflow from suds, and repeat service calls.

Last updated: January 2026

Kenmore Elite dishwashers are made for Kenmore by major appliance manufacturers (Kenmore is a brand, not a single factory). For the Kenmore Elite dishwasher model 46513343600, the exact manufacturer can vary by production run, so we use the model’s documentation and parts list to match the correct components.

How to identify the maker for your specific unit

The most reliable way is to use the model and serial tag on the dishwasher and cross-check it with the documentation.

• Find the model and serial number label on the dishwasher (often on the side of the drawer on drawer-style units).
• Record the full model number 46513343600 and the serial number.
• Use the documentation to confirm features and service information for your exact configuration.
• Match replacement parts by model number, not by appearance alone.
• If you are comparing parts, verify the part ID before ordering.

Reference: 46513343600 owner's manual

Why the manufacturer can vary (and why it matters)

Kenmore sources appliances from multiple manufacturers over time. That means two Kenmore Elite dishwashers can look similar but use different control boards, water valves, or wiring harnesses. Matching by model number helps ensure proper fit and function.

Common components that must match the model

Component type	What it affects	Example part for this model
Electronic control	Cycles, draining, error behavior	Dishwasher electronic control board 99003733
Water fill system	Filling, leaks, no-fill issues	Water valve WPW10186746
Overheat protection	No power, dead control symptoms	Dishwasher thermal fuse 99003624

If you are troubleshooting instead of identifying the maker

If your goal is to diagnose a problem (not just identify who built it), start with the error code and symptom path for Kenmore dishwashers.

• Note any flashing lights or beeps
• Try a reset per the manual
• Check for standing water and drain issues
• Confirm the door/drawer closes and latches fully
• Inspect for leaks at inlet and drain connections

Helpful reference: Kenmore he dishwasher error codes

Why it matters

Knowing the true maker is less important than matching the correct parts and service procedures for 46513343600. Using the manual and model-based parts lookup prevents wrong-part returns and repeat failures.

Last updated: January 2026