Owner’s manual
Error Codes
How many cubic feet is my Kenmore Elite refrigerator?
For Kenmore Elite refrigerator model 10657863800, the exact cubic-foot capacity is listed on the model’s rating label and in the specifications section of the 10657863800 owner's manual. Use those two sources to match the correct capacity to your specific configuration.
Most Kenmore side-by-side models list capacity on the rating label (also called the model and serial tag). Check these common locations:
- Inside the fresh food compartment on a side wall
- Near the crisper drawer area
- Along the ceiling of the refrigerator compartment
- On the hinge-side door frame
Capacity is the total interior volume (fresh food plus freezer). Online listings can vary because they may show:
- Total capacity vs. usable capacity
- A close model number in the same family
- A rounded value (for example, 25.0 vs. 25.1)
| Source | What you’ll see | Best for |
|---|---|---|
| Rating label inside the refrigerator | Model/serial and often capacity | Fast confirmation on the appliance |
| 10657863800 owner's manual | Specifications and feature details | Verifying the official spec |
| Product listing pages | Marketing capacity | Comparing similar models |
Knowing the correct cubic-foot capacity helps us match the right shelves, bins, and storage parts for your exact layout, and it also helps when comparing replacement refrigerators or planning kitchen space.
Last updated: January 2026
Is there a way to reset a Kenmore Elite refrigerator?
Yes. For Kenmore Elite refrigerator model 10657863800, the most reliable reset is a power reset: turn the controls OFF (if your model has an OFF setting), unplug the refrigerator, wait about 5 minutes, then restore power and set the temperatures back to normal.
- Power reset (hard reset): Unplug for ~5 minutes, then plug back in.
- Control OFF/ON reset: Turn the Temperature Control or Refrigerator Control to OFF, then back to your normal setting after power is restored.
- Dispenser/control feature reset: Some control features reset with a button press-and-hold (for example, certain sound or lock features use a 3-second hold).
- After a reset: Confirm the doors are fully closed and air vents are not blocked by food packages.
Most side-by-side refrigerators need time to stabilize after power is restored.
| What you notice | Normal after reset? | What to do |
|---|---|---|
| Compressor and fans don’t start immediately | Yes | Wait 5 to 10 minutes |
| Temperatures are off for several hours | Yes | Allow up to 24 hours to fully recover |
| Dispenser seems “locked” | Sometimes | Check lock and sound settings in the controls section |
| Door alarm sounds | Yes if a door is open | Close both doors to clear it |
A reset helps, but water and ice problems are often caused by flow restrictions or a weak inlet valve.
- Replace the water filter on schedule; a clogged filter can reduce dispenser flow and slow ice production.
- Check the household shutoff valve is fully open.
- Inspect the water line for kinks behind the refrigerator.
- If water won’t dispense but the dispenser switch works, the inlet valve can be the failure point.
Helpful parts for common water-related symptoms:
Resetting clears minor control glitches and restores normal operation after a power interruption, but it also helps you confirm whether you have a one-time electronics issue or an ongoing problem with cooling, airflow, or the water system.
For model-specific control steps and settings, follow the 10657863800 owner’s manual.
Last updated: January 2026
What does er ff mean on Kenmore Elite refrigerator?
On Kenmore Elite refrigerator model 10657863800, an ER FF code points to a problem with the freezer evaporator fan (the fan that moves cold air through the freezer and into the fresh food section). When that fan cannot run correctly, temperatures rise and airflow drops.
- Make sure the freezer vents are not blocked by food packages.
- Listen for the evaporator fan: it should run when the compressor is running and the freezer door switch is pressed.
- Look for frost buildup on the freezer back panel (heavy frost can stop airflow).
- Check that the freezer door closes tightly and the gasket seals all the way around.
- Power reset: unplug the refrigerator for 5 minutes, then restore power and recheck.
| Likely cause | What you may notice | Typical fix |
|---|---|---|
| Ice buildup restricting the fan | Weak airflow, warmer fridge section | Defrost and correct the defrost problem |
| Fan blade obstructed | Rattling, ticking, or fan stops | Clear obstruction, inspect blade |
| Evaporator fan blade damaged | Loud vibration or scraping | Replace the fan blade |
| Control or wiring issue | Fan never runs even with good airflow path | Diagnose wiring/control circuit |
If you find a cracked or wobbling fan blade, replacing the evaporator fan blade is a common repair for this symptom on side-by-side units like this Kenmore Elite. The correct replacement part for this model is the refrigerator evaporator fan blade WP2169142.
The evaporator fan is what distributes cold air. If it fails, the freezer may still feel somewhat cold near the evaporator, but the refrigerator compartment often warms up first because it depends on that airflow.
For model-specific control settings, airflow guidance, and troubleshooting steps, use the 10657863800 owner's manual.
Last updated: January 2026
