Kenmore 10657767790 refrigerator Parts

Most Kenmore side-by-side refrigerators are about 33 inches to 36 inches wide; your Kenmore model 10657767790 falls in that common size range. For the exact cabinet width and required clearances for your specific unit, use the dimensions and space requirements in the owner's manual.

Typical width ranges (what you can plan around)

Side-by-side refrigerators are usually built in a few standard widths. Use these as planning numbers until you confirm the exact spec for model 10657767790.

• 33 in. class: common for many standard-capacity side-by-sides
• 36 in. class: very common “full-size” side-by-sides
• 42 in. class: built-in style (less common for Kenmore 106 models)
• Add clearance space for airflow and door swing (see below)

Clearance you should include (from the manual)

Even if the cabinet width fits, the refrigerator needs space around it to cool properly and to open the doors.

• Plan for 1/2 inch clearance on each side and at the top for ventilation
• If the refrigerator is next to a fixed wall, plan for at least 2 inches on the hinge side (or both sides, depending on layout) so the doors can swing open
• If you have an ice maker connected, leave extra room behind the unit for the water line connection

Quick planning table

Use this to estimate the opening you need before you confirm the exact width in the manual.

What you are measuring	What to include	Typical planning number
Cabinet width	Refrigerator body only	33 to 36 in.
Opening width	Cabinet width + side clearances	cabinet width + 1 in.
Door swing space	Extra room near walls/cabinets	2 in. minimum near a fixed wall

Why it matters

If the opening is too tight, the condenser and compressor can run hotter, temperatures can fluctuate, and doors may not open fully. Leaving the recommended ventilation and swing clearance helps your Kenmore refrigerator cool efficiently and prevents cabinet-to-door interference.

Ordering parts while you measure

If you are fitting the refrigerator into a new space or replacing door bins and drawers, you can order model-matched parts from the parts list for 10657767790, or search by model number on Sears PartsDirect.

Last updated: February 2026

For Kenmore model 10657767790, the model number is read left to right; the first three digits (106) identify the manufacturer series, and the remaining digits identify the specific design and feature set. We use the full model number to match the correct refrigerator parts and the right owner instructions in the owner's manual.

Where to find the model number on this refrigerator

On Kenmore side-by-side refrigerators like 10657767790, the model and serial label is typically inside the fresh food compartment (often on a side wall near the crisper area or door opening). The manual also notes you should record the model and serial information for service and parts matching.

• Check inside the refrigerator section first (door opening side walls)
• Look near the crisper pans and lower liner area
• Check the ceiling area near the light cover if you do not see it on the walls
• Write down both model and serial numbers exactly as shown

How Kenmore model numbers work (what the digits mean)

Kenmore model numbers commonly use a prefix that points to the manufacturing source, followed by digits that narrow down the exact configuration.

What you see	What it tells us	Why it matters
First 3 digits (example: 106)	Manufacturer series/prefix	Helps route you to the correct parts diagrams and manuals
Remaining digits	Model variation and features	Ensures correct fit for items like gaskets, ice maker parts, and controls
Full model number	Exact identity of the appliance	Prevents ordering the wrong replacement part

Why it matters when ordering parts

Even small digit differences can change the correct part for a Kenmore refrigerator. Using the full model number helps us match parts like an ice maker assembly, thermostat, or door gasket to your exact build.

• Prevents wrong-part returns due to fit or wiring differences
• Improves troubleshooting accuracy (cooling, ice maker, dispenser issues)
• Ensures you get the right diagrams and part breakdowns
• Speeds up ordering when you shop by model on Sears PartsDirect

Helpful tip for Kenmore 106 refrigerators

If you are troubleshooting and your model is a 106 prefix, we use Kenmore 106-specific guidance for diagnostics and symptoms. For display or diagnostic code questions, see Kenmore 106 model refrigerator error codes.

Last updated: February 2026

For Kenmore model 10657767790, the model number alone usually does not state the exact cubic-foot capacity. The most reliable way is to look up the capacity in the owner's manual; if you need a quick estimate, measure the usable interior space and convert cubic inches to cubic feet.

Fast ways to find the capacity

• Check the specifications section in the owner's manual for your exact model.
• Look for a rating/spec label inside the fresh food section; some units list capacity there.
• If you only have the model number, use it to pull the correct documentation and parts breakdown for 10657767790.
• Estimate capacity by measuring interior dimensions (best for a ballpark number).

How to estimate cubic feet (simple math)

1. Empty one compartment (refrigerator or freezer) enough to measure.
2. Measure width x depth x height of the usable interior space in inches.
3. Multiply to get cubic inches.
4. Divide by 1,728 to convert to cubic feet.

Quick conversion table

What you have	What to do	Result
Interior inches (W x D x H)	Multiply W x D x H	Cubic inches
Cubic inches	Divide by 1,728	Cubic feet (approx.)

Why it matters

Cubic-foot capacity helps you compare refrigerators, choose the right storage accessories (bins, shelves, pans), and confirm fit for features like the ice maker and water filtration system shown for this model family.

Parts note (when capacity affects fit)

If you are matching storage parts by size (for example, a crisper pan), use the model number 10657767790 to select the exact part listing; a common example is the refrigerator crisper pan WP2188656. You can also search by model on Sears PartsDirect if you are cross-checking multiple part options.

Last updated: February 2026

For your Kenmore refrigerator model 10657767790, the most reliable way to tell its age is to read the serial number on the model and serial tag and decode the manufacturing date from that serial format. The tag location and identification details are shown in the 10657767790 owner's manual.

Where to find the model and serial tag

On most Kenmore side-by-side refrigerators, the model and serial tag is typically found in one of these spots:

• Inside the fresh food compartment on a side wall
• On the ceiling area inside the fresh food compartment
• Behind the crisper drawers or near the deli drawer area
• Along the door frame when the refrigerator door is open
• On the back exterior panel (less common for day-to-day access)

How to decode the age once you have the serial number

Kenmore is a brand name; many Kenmore refrigerators (including many 106 prefix models) were built by Whirlpool. The serial number format varies by the actual manufacturer, but these approaches work consistently:

• Write down the full model number and serial number exactly as shown
• Look for a week and year pattern in the first several characters (common on Whirlpool-built units)
• If the tag includes a manufacture date field, use that date directly
• If you are comparing multiple dates, use the earliest manufacturing date as the build date

Quick reference: what you will use

What you have	What it tells you	What to do next
Model number (10657767790)	Product family and parts match	Use it to match parts and manuals
Serial number	Build date code	Decode the date from the serial format
Purchase date	When it was bought	Use for warranty and service history

Why it matters

Knowing the build date helps us match the correct refrigerator parts (like a thermostat, defrost heater, or ice maker assembly) and set realistic expectations for maintenance items such as door gaskets and water filtration components.

Parts and documentation that help with identification

• Use the diagrams and identification section in the 10657767790 owner's manual
• If you are replacing common wear items, match by model first, then confirm by part ID (example: refrigerator thermostat WP2198202)
• For ordering, use the parts list for model 10657767790 on this page, or search by model on Sears PartsDirect

Last updated: February 2026