Jenn-Air JDPSG244LS1 dishwasher Parts

Yes, you can buy replacement parts for a dishwasher; for Jenn-Air model JDPSG244LS1, we recommend matching parts by model number so the component fits and performs correctly (whether you need a water inlet part, a door seal, or a rack). Using the right part helps restore normal washing, draining, and leak protection.

These are some of the most frequently needed dishwasher parts for this model:

• Water fill components such as the fill valve assembly W11434044
• Water inlet components such as the water inlet W11535094
• Door sealing parts such as the seal, door bottom W11664713
• Drain components such as the hose-drain,e W11414944
• Wash system parts such as the dishwasher manifold and spray arm assembly W11545334

Use this checklist to avoid ordering the wrong item:

• Confirm the model number on the rating label is JDPSG244LS1
• Match the part ID (not just the description)
• Compare the part name to the symptom (leak, no fill, poor cleaning, not draining)
• Replace clamps or seals when you replace hoses or water parts
• If multiple versions exist, match by the part ID listed for your model

Dishwashers are sensitive to fit and sealing surfaces; the correct JDPSG244LS1 parts help prevent leaks, improve wash performance, and reduce repeat repairs caused by mismatched components.

Last updated: February 2026

A Jenn-Air dishwasher typically lasts 10 to 13 years with normal household use and basic maintenance. For your JDPSG244LS1, age plus symptoms (leaks, poor cleaning, not draining, or not filling) usually determines whether a repair is worth it.

• Water quality: hard water speeds up mineral buildup in the sump, spray arms, and inlet.
• Loading habits: overloading blocks spray and strains racks and tracks.
• Detergent and rinse aid use: correct amounts reduce residue and odor.
• Filter and spray path cleanliness: clogs force the motor to work harder.
• Small leaks: slow seepage can damage components over time.

If the dishwasher is otherwise in good shape, replacing a failed wear part often restores normal operation:

• Fill valve assembly W11434044 (fixes no-fill, slow fill, or intermittent filling)
• Hose-drain,e W11414944 (helps resolve drain leaks or restricted draining)
• Seal, door bottom W11664713 (addresses water leaking at the bottom of the door)
• Dishwasher spray arm, lower W11550888 (improves wash performance when jets clog or crack)
• Latch assembly (includes switch) W11412299 (fixes door not latching or cycle not starting)

Dishwashers often fail gradually; catching a fill, drain, or door-seal problem early prevents secondary damage to the motor, wiring, and flooring. A simple part replacement can add years of reliable service.

Last updated: February 2026

Yes, many repairs on your Jenn-Air JDPSG244LS1 dishwasher are DIY-friendly if you can safely shut off power and water and you are comfortable with basic hand tools. Simple swaps like seals, spray arms, and some latches are usually straightforward; wiring-heavy or leak-related repairs take more care.

Often DIY for most homeowners

• Replacing a leaking door seal such as the seal, door bottom W11664713
• Swapping a worn tub gasket such as the gasket-tub,d W11483553
• Replacing a damaged spray component such as the dishwasher spray arm, lower W11550888
• Replacing a door latch that will not click or start, such as the latch assembly (includes switch) W11412299

Usually better for an experienced DIYer or technician

• Water supply and fill issues involving the fill valve assembly W11434044
• Drain leaks or routing issues involving the hose-drain,e W11414944
• Internal wash system or motor-area repairs (sump, motor, harness)

• Turn off power at the breaker (dishwashers are hardwired or plugged in under the sink).
• Shut off the dishwasher water supply valve.
• Protect the floor; keep towels and a shallow pan ready for residual water.
• Take photos of wire and hose routing before disconnecting anything.
• Use the correct fasteners; a missing or wrong screw can cause leaks or vibration.

Dishwashers like the JDPSG244LS1 rely on correct water level, tight seals, and proper spray action. A small installation mistake (pinched gasket, loose clamp, misrouted drain hose) can turn a minor repair into a leak or repeat failure.

Last updated: February 2026

In the JDPSG244LS1 dishwasher, the most commonly replaced parts are the water-fill parts (inlet and valve), door-latching and sealing parts, and wash-system parts like spray arms and the sump/motor. These parts see constant water, heat, and movement, so wear, clogs, and leaks are the most common reasons for replacement.

These are the parts we see replaced most often across built-in dishwashers like the JDPSG244LS1:

• Water inlet and fill valve (no fill, slow fill, overfill, or fill-related error)
• Door latch and door seals (won’t start, won’t stay closed, or leaks)
• Drain hose and clamps (leaks under sink, poor draining)
• Spray arms and manifold (poor cleaning, low spray pressure, debris in jets)
• Sump/motor assembly (no wash action, loud grinding, intermittent washing)
• Racks and rack hardware (broken wheels, rusting, poor rack movement)

We recommend these quick checks first because they solve many “bad part” symptoms:

• Clean the filter area and remove any standing debris (bones, labels, glass)
• Inspect spray arm holes for clogs; rinse and clear jets
• Confirm the sink drain and garbage disposer inlet are not blocked
• Check for kinks in the drain hose and verify the high loop/air gap setup
• Look for obvious leak tracks: white mineral lines, wet insulation, or drip marks

Replacing the right part restores wash performance and prevents repeat leaks. For example, a door leak can be a worn bottom seal, but it can also be caused by a misaligned rack or a clogged spray arm that forces water toward the door.

Last updated: February 2026