Error Codes
How to reset a Frigidaire refrigerator?
For the Frigidaire FRSS2623AD6 side-by-side refrigerator, the most reliable reset is a power reset: turn the unit off (if it has a power button), unplug it for about 10 minutes, then plug it back in. This clears many control glitches, display issues, and minor cooling interruptions.
- Power reset (recommended): Unplug for 10 minutes, then restore power.
- Breaker reset: Switch the refrigerator circuit breaker OFF for 10 minutes, then ON.
- Control lock check: If buttons do not respond, disable Control Lock (if enabled) and try again.
- Water filter light reset: After replacing the filter, reset the filter indicator using the filter reset option on the display (wording varies by control style).
- Error code follow-up: If an error returns after reset, troubleshoot the specific code.
- Move items away from the outlet so you can access the plug.
- Unplug the refrigerator.
- Wait 10 minutes (this lets the control board fully discharge).
- Plug it back in.
- Allow 24 hours for temperatures to stabilize after any reset or power interruption.
If the “Replace” or “Order” light stays on after installing a new filter, the indicator typically needs a manual reset on the control panel.
- If you replaced the filter, confirm it is fully seated and locked.
- Then reset the filter status on the display.
Helpful reference: how to replace the water filter in a Frigidaire refrigerator
| Symptom after reset | Most common cause | What we recommend |
|---|---|---|
| Display works but no water | Air in water line | Purge air from dispenser |
| “Replace filter” light stays on | Filter indicator not reset | Reset filter status |
| Error code returns | Ongoing fault | Use error code troubleshooting |
A reset can clear temporary control-board logic issues, but it will not fix a failed component (like a temperature sensor, evaporator fan motor, or defrost heater). If problems return quickly, troubleshooting the symptom saves time and prevents food temperature swings.
For code-specific help: Frigidaire refrigerator error codes
Last updated: January 2026
What does EF stand for on a Frigidaire refrigerator?
On the Frigidaire FRSS2623AD6 side-by-side refrigerator, EF (often shown as SY EF or 5Y EF) points to a problem in the evaporator fan circuit, meaning the freezer evaporator fan is not running correctly or the control is not sensing it properly.
- Power reset: Unplug the refrigerator (or turn off the breaker) for 5 minutes, then restore power.
- Airflow blockage: Make sure packages are not blocking the freezer air vents.
- Ice buildup: Look for heavy frost on the freezer back wall; that can restrict airflow and stress the fan.
- Door seal condition: A leaking gasket can cause excess frost and fan issues.
- Listen for the fan: With the freezer door closed (door switch pressed), you should typically hear the evaporator fan running.
If the code returns after a reset and airflow checks, these are the most common repair paths:
| Likely cause | What you may notice | Common fix |
|---|---|---|
| Evaporator fan motor issue | Warm freezer, weak airflow, fan noise or no fan sound | Replace the fan motor |
| Fan blade damage/ice contact | Rattling, ticking, scraping | Replace blade and clear ice |
| Temperature sensing issue | Temps swing, code appears intermittently | Test/replace sensor |
| Control or wiring problem | Fan tests good but code persists | Inspect harness, control diagnosis |
Helpful model-matched parts to consider:
- Refrigerator evaporator fan motor 5304532557
- Refrigerator evaporator fan blade 242219302
- Refrigerator temperature sensor 5303918775
The evaporator fan moves cold air from the evaporator through the freezer and into the fresh food section. When that airflow drops, temperatures rise, frost can build up faster, and food quality and ice production can suffer.
For code definitions and what they mean across Frigidaire models, use Frigidaire refrigerator error codes.
Last updated: January 2026
How to troubleshoot a Frigidaire refrigerator?
For the Frigidaire FRSS2623AD6 side-by-side refrigerator, we troubleshoot by confirming power and temperature settings first, then checking airflow, door sealing, and coil cleanliness. If cooling is still weak, focus on the evaporator fan and temperature sensing components.
- Confirm the refrigerator is plugged in and the outlet has power.
- Verify temperature settings: target 37°F for fresh food and 0°F for freezer.
- Make sure vents inside both compartments are not blocked by food packages.
- Check both doors close fully and sit level; look for gaps or rubbing.
- Clean condenser coils and the area around the base grille to restore heat release.
If the unit runs but does not cool well, these are the most common patterns:
| Symptom | Most likely area | What we do next |
|---|---|---|
| Freezer cold, fridge warm | Airflow from freezer to fridge | Check for blocked vents, frost buildup, weak evaporator fan |
| Both sections warm | Sealed system, compressor, controls | Check condenser airflow, listen for compressor, look for error codes |
| Frost on back wall of freezer | Defrost system | Inspect defrost heater and airflow restrictions |
- A noisy or stalled evaporator fan can stop cold air circulation; inspect the fan blade and motor: refrigerator evaporator fan blade 242219302, refrigerator evaporator fan motor 5304532557
- A bad temperature sensor (thermistor) can cause incorrect cooling decisions: refrigerator temperature sensor 5303918775
- If doors do not seal, warm air leaks in and creates frost and poor cooling; inspect gaskets: Frigidaire refrigerator door gasket (black) 241786013, Frigidaire refrigerator freezer door gasket, black 241786014
Poor cooling can sometimes be confused with dispenser or ice issues. If water flow is slow or tastes off, replace the filter and purge air.
- Use the correct filter for this model: Frigidaire refrigerator water filter FPPWFU01
- Follow: how to replace the water filter in a Frigidaire refrigerator
A side-by-side refrigerator depends on steady airflow and accurate temperature sensing. Fixing a simple restriction, dirty coils, or a leaking door seal often restores normal temperatures and prevents frost buildup and compressor overwork.
Last updated: January 2026
