Gibson FV16M4WSFC upright freezer - lg30887150 Parts

A 16 cubic foot upright freezer (including the Gibson FV16M4WSFC) typically measures about 60 to 73 inches tall, 23 to 30 inches wide, and 27 to 30 inches deep. Exact exterior size varies by cabinet design, door thickness, and hinge style.

Most freestanding 16 cu ft upright freezers fall into these common ranges:

• Height: 60 to 73 inches
• Width: 23 to 30 inches
• Depth: 27 to 30 inches
• Door swing clearance: plan extra space on the hinge side
• Ventilation clearance: leave space behind and above for airflow

Use this as a practical checklist when measuring your kitchen, garage, or basement.

Getting the size right prevents door clearance problems, overheating from poor airflow, and installation headaches. It also helps you plan shelf access and loading space, especially in tight utility rooms.

Interior storage can change if shelves or supports are missing or damaged. For this model, we commonly see these parts involved:

• First shelf 08037939 (interior shelf position and storage layout)
• Shelf 08037940 (additional shelf surface)
• Shelf support 297001500 (supports shelf mounting)
• Shelf support 297001600 (supports shelf mounting)

Last updated: February 2026

An upright freezer like the Gibson FV16M4WSFC usually stops freezing because cold air is not being produced or not being circulated. The most common causes are a dirty condenser area, a failed defrost system creating an ice blockage, a door seal air leak, or a compressor start problem.

• Confirm the temperature control is set colder and the unit has had 24 hours to stabilize after changes.
• Make sure the door closes tightly; look for gaps, torn gasket areas, or heavy frost near the door.
• Check for heavy frost on the back interior panel; this points to a defrost problem blocking airflow.
• Clean dust from the condenser area (unplug first); poor heat release can stop cooling.
• Listen for the compressor: steady hum is normal; repeated clicking often indicates a start issue.

If you find wiring damage or intermittent power to cooling components, the harness is a common repair point.

• Electronic harness 5303925136

If you see signs of a sealed-system restriction (runs but barely cools), a technician may reference sealed-system components during diagnosis.

• Filter drier 5303305677

When an upright freezer is not freezing, food safety and compressor wear become immediate concerns. Fixing airflow, defrost, or condenser heat-release issues early prevents long run times and helps the freezer return to stable temperatures.

Last updated: February 2026

A garage-ready freezer is designed to keep food safely frozen even when the room around it gets very hot or very cold, while a regular freezer is built for stable indoor temperatures. For a Gibson FV16M4WSFC upright freezer, using it in a garage depends on how extreme your garage temperatures get and how steady they stay.

Garage-ready models typically include design features that help the sealed system and controls operate across a wider ambient temperature range.

Common differences include:

• Wider operating temperature range (handles colder winters and hotter summers better)
• More robust temperature control strategy (reduces warm-ups and nuisance shutoffs)
• Heavier-duty door sealing to limit warm air leaks
• Compressor and start components selected to tolerate tougher conditions
• Better insulation and airflow design to reduce run time in heat

Most standard freezers are intended for conditioned indoor spaces. In a garage, they can:

• Run almost constantly in high heat (higher energy use, more wear)
• Have temperature swings that soften food during hot spells
• Shut down or under-cool in cold weather (controls may not call for cooling)
• Build excess frost if the door seal leaks or humidity is high

We recommend focusing on temperature stability and door sealing.

• Place it where temps are most stable (away from direct sun and exterior doors)
• Keep clearance around the cabinet for airflow
• Verify the door closes firmly; replace worn latch parts if needed (see latch 5309949966)
• If you see heavy frost or warm spots, check for air leaks and overloading
• Use an appliance thermometer to confirm it holds about 0°F consistently

Freezers protect food safety by staying at or below 0°F. When ambient conditions push a non-garage-rated unit outside its design range, you can get thawing, excess run time, and premature component wear.

Last updated: February 2026

On a Gibson upright freezer like model FV16M4WSFC, the model number is printed on the appliance’s rating label, usually inside the cabinet near the door opening. Check the upper side wall, the ceiling area, or near the bottom front edge behind the kickplate.

Look for a paper or foil sticker that includes the model number and serial number.

• Inside the freezer compartment on the left or right wall near the front
• On the cabinet frame around the door opening (hinge side is common)
• On the ceiling area just inside the door
• Behind the lower front toe grille or kickplate area
• On the back exterior panel near the power cord entry

The rating label typically includes several identifiers. We recommend copying these exactly:

• Model number (example: FV16M4WSFC)
• Serial number
• Electrical rating (volts/amps)
• Refrigerant type (for service reference)

Gibson freezers can use different shelves, door hardware, and wiring components across similar-looking units. Using the exact model number helps us match the correct parts list and diagrams for your freezer.

If you are replacing interior hardware, common model-matched items include shelf supports such as the shelf support 297001500 or shelf support 297001600.

Last updated: February 2026