Kenmore Elite 10656703500 side-by-side refrigerator Parts

For Kenmore appliances, we read the model number as a manufacturer prefix plus a model series and revision digits. On Kenmore Elite side-by-side refrigerator model 10656703500, the 106 prefix identifies the manufacturer family, and the remaining digits narrow down the exact design so you get the right parts and service information; confirm the full number on the 10656703500 owner's manual.

On Kenmore Elite 10656703500, the model and serial label is located on the inside wall of the refrigerator compartment (fresh food section). Check that label and copy the number exactly.

• Look on the inside wall near the crisper area or side liner
• Write down the full model number and serial number
• Record the purchase date if it is listed or known
• Use the full model number when ordering parts like a water filter or ice maker

Kenmore model numbers are typically structured like this:

Many refrigerator parts look similar but vary by revision. Using the complete model number helps match the correct fit and connections.

Common examples on this model include:

• Water filter selection (for example, genuine Kenmore refrigerator water filter EDR3RXD1)
• Ice maker compatibility
• Door bins, gaskets, and hinges
• Defrost system parts (heater, bi-metal, evaporator fan motor)

• Use all digits, including the last two (for example, 00)
• Do not rely on “Kenmore Elite side-by-side” alone
• Match the model number from the label, not from a receipt or online listing

Last updated: February 2026

A Kenmore Elite refrigerator typically lasts 12 to 15 years with normal household use. For your Kenmore Elite side-by-side refrigerator model 10656703500, consistent cleaning, good airflow around the cabinet, and timely replacement of wear items (like the water filter) help it reach that range.

• Condenser coil cleanliness (dust buildup makes the compressor work harder)
• Door seal condition (air leaks cause longer run times and moisture issues)
• Ventilation and leveling (poor airflow and misalignment stress components)
• Water and ice system upkeep (filter changes and leak prevention)
• Power interruptions and temperature settings (frequent swings add wear)

Use your 10656703500 owner's manual for the exact care steps and intervals for this model.

• Vacuum or brush condenser area regularly (more often with pets)
• Keep door gaskets clean; wipe with mild soap and water, then dry
• Confirm doors close fully and bins are not blocking closure
• Replace the water filter on schedule; use the correct filter for fit and flow
• Keep freezer and fresh food vents unblocked for proper airflow

For filtration on this model, the genuine Kenmore refrigerator water filter EDR3RXD1 is a common replacement part.

Most major failures (compressor, control board, sealed system) are expensive compared with routine care. Simple maintenance reduces run time, helps stabilize temperatures, and lowers the chance of moisture and ice buildup that can shorten the life of a side-by-side refrigerator.

Last updated: February 2026

The Kenmore Elite side-by-side refrigerator model 10656703500 has a total capacity of about 21.9 cubic feet. For the exact configuration details (shelf and bin layout that affects usable space), we recommend confirming in the 10656703500 owner's manual.

Knowing cubic feet helps us match the right replacement parts and accessories (like a refrigerator water filter), and it also helps when comparing storage space, airflow needs, and expected cooling recovery after door openings.

• Keep air vents clear so cold air can circulate between compartments.
• Avoid overpacking the freezer; tight packing restricts airflow and can cause uneven temperatures.
• Leave recommended clearance around the cabinet for ventilation during installation.
• Set temperatures to typical targets (about 37°F fresh food, 0°F freezer) and adjust gradually.
• Replace the water filter on schedule to maintain water flow and taste.

If you are also checking specs because you are ordering filtration parts, this model uses the replacement filter listed as refrigerator water filter EDR3RXD1 (replacement filter order part #9020 is referenced in the manual).

Last updated: February 2026

Your Kenmore Elite refrigerator’s model number is printed on the model and serial number label, which is typically located on the inside wall of the refrigerator compartment. For this Kenmore Elite side-by-side refrigerator, the model number format shown in the documentation is 106. (with the full model listed as 10656703500).

Check these common label locations on Kenmore side-by-side refrigerators:

• Inside the fresh food (refrigerator) compartment on a side wall
• On the ceiling area inside the refrigerator compartment
• On the inside wall near the crisper drawers (you may need to remove a bin for a clear view)
• Less commonly, inside the freezer compartment on an interior wall

For the exact label location and what the tag looks like, use the 10656703500 owner's manual.

We recommend recording the full model number and serial number exactly as shown on the label.

• Model number (example for this unit: 10656703500)
• Serial number
• Purchase date (if available)

The model number is what we use to match the correct Kenmore parts and diagrams for your exact refrigerator configuration (shelves, ice maker, water filter system, door style, and trim).

Try these steps to make the tag easier to read:

• Wipe the label gently with a damp cloth and dry it
• Use a flashlight held at an angle to reduce glare
• Take a close-up photo and zoom in
• Copy the characters exactly (including leading zeros)

If you are also replacing the water filter on this model, the manual’s accessories section references replacement filter part number 9020; a common match for this refrigerator is the refrigerator water filter EDR3RXD1.

Last updated: February 2026