Kenmore 25355693400 refrigerator Parts

Your Kenmore refrigerator model 25355693400 has its exact capacity (cubic feet) listed on the serial/rating plate inside the fresh food compartment; that plate is the most accurate way to match your specific unit’s specs. We also show where to find this information in the owner's manual.

Fast ways to find the cubic feet

• Check the serial/rating plate inside the refrigerator compartment; it lists model and serial information and typically includes key specs.
• Look in the specifications section of the owner's manual.
• If the label is missing or unreadable, use the model number 25355693400 to search parts and documentation on Sears PartsDirect.

Where to look inside the refrigerator

On Kenmore side-by-side models like 25355693400, the serial plate is located inside the refrigerator (fresh food) compartment.

Common places to check:

• Side wall near the crisper drawers
• Side wall near the top shelf area
• Ceiling area near the light housing

What “cubic feet” means (and why it matters)

Cubic feet is the total interior storage volume. Knowing it helps you:

• Compare replacement refrigerators fairly
• Choose correctly sized organizers and bins
• Estimate cooling load and typical food storage capacity

If you need a quick estimate

If you cannot access the label right away, most full-size Kenmore side-by-side refrigerators are commonly in this range:

Refrigerator type	Typical capacity range
Side-by-side refrigerator	20 to 26 cu. ft.

Use the rating plate or the owner's manual to confirm the exact number for 25355693400.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 25355693400, the model number is printed on the serial plate located inside the refrigerator (fresh food) compartment. Use that label to record both the model and serial number for parts lookup and service reference (see the 25355693400 owner's manual).

Where to look (fast checklist)

• Open the fresh food (refrigerator) door, not the freezer door
• Look along the inside walls of the refrigerator compartment
• Check near the upper area or side wall where a serial plate is commonly mounted
• Use a flashlight; the print can be small
• Write down the full model number and serial number exactly as shown

What you should capture from the serial plate

Item on label	What it’s used for	Tip
Model number (25355693400)	Matching the correct parts diagrams and parts list	Copy every digit in order
Serial number	Identifying production details for service and compatibility checks	Take a clear photo for reference
Purchase date (your record)	Warranty and maintenance records	Record it in your manual

Why it matters

Kenmore model numbers in the 253 series can look similar, but small differences change which parts fit (for example, door gaskets, sensors, or the water filter). Using the exact model number from the serial plate helps us match the right refrigerator parts the first time.

Related parts you may look up by model number

• Water filter (often replaced every 6 to 9 months): genuine Kenmore refrigerator water filter WF2CB
• Temperature sensing and cooling components: refrigerator sensor 240597220
• Door sealing parts: refrigerator gasket 241786014

Last updated: February 2026

To replace the ice maker in your Kenmore 25355693400 side-by-side refrigerator, we turn off power and the water supply, remove the ice bin, swap the ice maker assembly, then restore water and power and discard the first batches of ice until taste and color are normal. See the owner's manual for model-specific access and switch locations.

Before you start (safety and prep)

• Unplug the refrigerator (or switch off the breaker).
• Turn off the household water shutoff valve.
• Remove the ice storage bin; do not use the ice chute as a handle and keep fingers out of the chute (surfaces can be sharp).
• Keep towels handy for small water drips.
• If you are installing or reconnecting a water line, use a proper shutoff valve (not a self-piercing type).

Basic replacement steps (typical side-by-side process)

1. Shut off ice production using the ice maker On/Off switch.
2. Remove the ice container by lifting up and out.
3. Access the ice maker (usually by removing the ice maker cover and mounting screws).
4. Disconnect wiring and the fill tube connection (varies by design).
5. Install the new ice maker in the same mounting points; transfer any identical brackets or stripper pieces from the old unit if required.
6. Restore water and power, then turn the ice maker back on.

After installation: what to expect

Because of new plumbing connections, the first ice production can be discolored or have an odd flavor. Discard those cubes until ice is clear and tastes normal.

Quick checklist

Item to verify	What “good” looks like	If not
Ice maker switch	Set to On (“I”) after water is connected	Leave Off (“O”) until water is on
Water supply	Steady flow, no leaks at connections	Tighten compression nut/ferrule, recheck
Ice quality	Clear cubes, normal taste after a few cycles	Discard more batches, flush water line

Why it matters

A correct ice maker replacement prevents leaks, protects the dispenser chute area from damage, and helps avoid off-tasting ice caused by disturbed water lines or long-stored cubes.

If you also need to refresh water quality after service, replacing the refrigerator water filter (for example, genuine Kenmore refrigerator water filter WF2CB) helps keep ice and water tasting clean.

For ordering the correct ice maker and related parts for model 25355693400, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

Most Kenmore side-by-side refrigerators are about 32 to 36 inches wide; your Kenmore 25355693400 is in that typical range. For the exact cabinet width (and door-clearance needs), we recommend confirming the dimensions in the installation guide.

Typical widths you will see (and what changes the number)

Side-by-side refrigerator width is usually driven by capacity and door design. Common factors that change the measured width include:

• Standard-depth vs. counter-depth cabinets
• Door and handle style (some handles add noticeable width)
• Hinge and door swing clearance needed to fully open drawers/bins
• Leveling and toe grille fit (can affect how the unit sits in the opening)
• Gasket compression and how tightly the doors seal

How to measure width the right way

Use a tape measure and capture both the appliance size and the space it needs to operate.

• Measure cabinet width (body of the refrigerator)
• Measure overall width with doors closed
• If handles protrude, measure overall width including handles
• Measure the opening width between cabinets or walls
• Allow extra space for door swing and for sliding shelves/drawers out

Quick reference: what to record

Measurement to record	What it tells you	Why it matters
Cabinet width	The refrigerator body size	Fit into the cutout/opening
Width with doors/handles	Real-world “installed” width	Prevents rubbing on cabinets/walls
Clearance for door swing	Space needed to open doors fully	Access to bins, drawers, ice container

Why it matters

If the refrigerator is even slightly too wide for the opening, doors may not open fully, door bins can hit adjacent cabinets, and the door seals can be stressed. Proper fit also helps the unit sit level and seal correctly, which supports stable temperatures.

If you are planning a water filter replacement while you are measuring, the genuine Kenmore refrigerator water filter WF2CB is a common maintenance item for this model family, and you can also search by model on Sears PartsDirect.

Last updated: February 2026

Kenmore model numbers work like an ID code: the first three digits identify the manufacturing source (for example, 253 indicates a Frigidaire-built Kenmore), and the remaining digits specify the exact design. For your Kenmore refrigerator model 25355693400, always use the full model number to match the correct parts.

Where to find the model number on a refrigerator

Check these common locations first:

• Inside the fresh food compartment on a wall label (often upper side wall)
• On the door frame when you open the refrigerator door
• Behind the toe grille or lower kick plate
• On the back exterior panel near the power cord
• In your paperwork; the full number and any suffix matter for parts fit

How to decode the number (and why the full number matters)

The prefix helps identify the product line and build source; the rest narrows down components like the ice maker, dispenser, and door configuration. Use the full model number when ordering parts or checking specifications in the 25355693400 owner's manual.

What you enter	Example	What it’s good for
Full model number	25355693400	Correct diagrams and exact-fit parts
Prefix only	253	Identifying the build source/family
Partial number	2535569	Not reliable for ordering

Quick parts examples for model 25355693400

Once you confirm the full model number, you can match common maintenance parts accurately:

• Water filter: Kenmore replacement cartridge 9911 (commonly listed as genuine Kenmore refrigerator water filter WF2CB)
• Door sealing issues: match the correct gasket by door location and diagram (examples include refrigerator gasket 241786013 and refrigerator gasket 241786014)
• Temperature sensing issues: a related part is the refrigerator sensor 240597220

Why it matters

Using the exact Kenmore model number prevents wrong-part returns and speeds troubleshooting because parts like water filters, gaskets, and control components can vary within the same 253-prefix family.

To shop beyond the parts list for this model, search by model number on Sears PartsDirect.

Last updated: February 2026