Kenmore 10650045717 side-by-side refrigerator Parts

On Kenmore side-by-side refrigerator model 10650045717, the model number is printed on the rating label inside the fresh food compartment or freezer area. We use that full number to match the correct parts list, diagrams, and the right Use and Care information in the 10650045717 owner's manual.

Where to find the model number label

Check these common locations (look for a sticker or metal plate with numbers and letters):

• Inside the refrigerator compartment on a side wall
• Inside the freezer compartment on a side wall
• Inside the door area near the hinge side
• Behind the lower crisper drawers (on the back wall)
• Behind the toe grille or kickplate at the bottom front

How to “read” the number so you get the right parts

For parts ordering and troubleshooting, the most important rule is to use the entire model number exactly as printed (no spaces, no missing digits).

• Model number identifies the product design family and configuration
• Series prefix (often 106 for Kenmore) helps narrow the manufacturer platform
• Full model (example: 10650045717) is what we use to ensure part compatibility

What you see on the label	What it’s used for	Why it matters
Model number	Parts lookup and manuals	Prevents ordering the wrong door bin, gasket, or motor
Serial number	Production date tracking	Helps confirm version changes within a model

Why it matters

Kenmore refrigerators can look identical across multiple model numbers, but parts like a door gasket, evaporator fan motor, or ice container can differ by revision. Using the exact model number helps avoid returns and repeat repairs.

Quick tip for parts matching

If you are replacing a storage bin or shelf, compare the part description and mounting style to your original. For example, a door bin such as the refrigerator door bin W11174793 must match the width, tabs, and rail style used in your door.

Last updated: February 2026

To replace the ice maker in your Kenmore side-by-side refrigerator model 10650045717, we disconnect power first, remove the ice bin and mounting hardware, swap in the new ice maker, then restore power and turn ice production back on using the shutoff arm or On/Off switch. See the 10650045717 owner's manual for your model’s exact ice maker on/off style.

Before you start (safety and prep)

• Unplug the refrigerator or disconnect power at the breaker.
• If you turned the unit on before the water line was connected, turn the ice maker off.
• Use a sturdy glass when dispensing ice (if your model has a dispenser).
• Keep screws and brackets together so the new ice maker mounts the same way.
• Confirm the freezer is at normal temperature before judging ice production after the repair.

Basic replacement steps (typical side-by-side process)

1. Turn the ice maker off.
   • Style 1: lift the ice maker door and raise the wire shutoff arm to Off.
   • Style 2: lift the ice maker door and move the switch to Off.
2. Remove the ice storage bin.
   • Lift and hold the ice maker door open.
   • Lift the bin front up and pull it out.
3. Remove the ice maker assembly.
   • Remove the mounting screws, then lift the ice maker off its mounting points.
   • Disconnect the wiring harness plug.
4. Install the new ice maker.
   • Connect the wiring harness.
   • Hang the ice maker on the mounting points and tighten screws.
5. Restore operation.
   • Reinstall the bin fully (the dispenser will not work if the bin is not pushed in all the way).
   • Turn the ice maker back on (arm down or switch On), then restore power.

Turning the ice maker back on (what to look for)

Ice maker style	Control you use	“On” position
Style 1	Wire shutoff arm	Arm down
Style 2	On/Off switch	Switch to On (right)

Why it matters

Installing the ice bin and shutoff control correctly prevents dispenser problems and helps the ice maker avoid overfilling; your model uses an automatic shutoff system tied to the bin level.

Last updated: February 2026

A bad compressor on Kenmore model 10650045717 usually shows up as poor cooling with the unit running a lot, repeated clicking as it tries to start, or unusual heat at the compressor area. Before condemning the compressor, we check airflow, condenser cleanliness, and start components per the 10650045717 owner's manual.

Quick symptoms checklist

• Refrigerator and freezer both warm, even though the unit seems to run often
• Repeated clicking/buzzing from the rear (start attempt, then shutoff)
• Compressor is very hot to the touch after trying to run (use caution)
• Little to no airflow inside the freezer (evaporator fan not running)
• Frost pattern problems on the evaporator (often points to sealed system or airflow issues)
• Normal fan noise but temperatures keep rising

What to rule out first (common look-alikes)

Many “bad compressor” calls end up being a different failure that prevents the compressor from starting or moving heat.

What you notice	More likely cause	What we do next
Clicking every few minutes, no steady run	Start device or run capacitor issue	Test/inspect the refrigerator capacitor WPW10662129 and start components
Runs a lot but still warm	Dirty condenser, poor airflow, door seal leak	Clean coils, verify door gaskets seal, confirm vents are not blocked
Freezer warm and no fan sound	Evaporator fan problem	Inspect fan blade and motor, ice buildup, wiring
Noises seem “new” but temps are normal	Normal operating sounds	Compare to normal sounds listed in the manual

Simple checks you can do safely

1. Confirm power and cooling settings: After a new install or power loss, allow 24 hours to cool fully (the coldest setting will not cool faster). See the 10650045717 owner's manual.
2. Listen at the back: A steady hum is different from repeated click-then-silence.
3. Check condenser airflow: Make sure the rear/bottom area is not packed with dust and has clearance.
4. Check door sealing: A leaking gasket can mimic compressor trouble by forcing constant run time.

Why it matters

Replacing a compressor is a major repair. Ruling out airflow issues, door seal problems, and start-component failures first prevents unnecessary cost and gets cooling restored faster.

Last updated: February 2026

Your Kenmore side-by-side refrigerator model 10650045717 has a total capacity of 21.9 cubic feet. For the exact breakdown of fresh food versus freezer space and other model-specific specs, we recommend checking the 10650045717 owner's manual.

How to confirm capacity for your exact configuration

Even within the 106.5004* family, small variations can affect how the interior is configured (bins, shelves, ice storage). Use these checks to match what you have at home:

• Verify the full model number on the inside wall of the fresh food compartment
• Compare your shelf and bin layout to the diagrams in the manual
• Note whether you have an in-door ice system and the style of ice storage bin
• Confirm whether any door bins or drawers have been replaced with non-original parts

Capacity quick reference

Spec	Value
Model	10650045717
Refrigerator type	Side-by-side refrigerator
Total capacity	21.9 cu. ft.

Why it matters

Knowing the cubic feet helps when you are planning food storage, estimating energy use, and choosing accessories that depend on interior space (like ice storage and door bin layouts). It is also useful for moving plans and for calculating freezer needs during a power outage.

Last updated: February 2026

Most Kenmore refrigerators average 10 to 15 years of service life. For your Kenmore 10650045717 side-by-side refrigerator, lifespan depends most on airflow (clean condenser area), tight door sealing, and keeping temperatures stable; our 10650045717 owner's manual covers the care steps that protect cooling performance.

Typical lifespan ranges (what we see most often)

• 10 to 15 years: common for many modern refrigerators
• 15 to 20 years: achievable with consistent maintenance and timely repairs
• Under 10 years: usually tied to heavy use, poor ventilation, dirty condenser coils, or repeated door seal issues

Lifespan range	What it usually means	Best next step
0 to 9 years	A correctable issue is shortening life	Improve airflow, clean coils, check seals
10 to 15 years	Normal expected service life	Keep up with routine maintenance
15+ years	Well-maintained unit	Plan for proactive part replacement as needed

Maintenance that extends refrigerator life

• Clean dust from the condenser area regularly so the compressor runs cooler
• Keep door gaskets clean and sealing evenly to prevent warm air leaks
• Set stable temps (about 37°F fresh food and 0°F freezer) and avoid frequent changes
• Leave proper clearance around the cabinet for ventilation
• Address unusual noises early (often tied to the evaporator fan area)

Parts that commonly affect longevity

If cooling gets weak, temperatures swing, or you hear a loud fan noise, these model-compatible parts are often involved:

• Refrigerator evaporator fan motor WP2315549 (moves cold air through the compartments)
• Refrigerator door switch W11396033 (controls lights and can affect fan operation on some designs)
• Refrigerator door gasket (gray) WPW10136734 (helps prevent air leaks and frost buildup)

Why it matters

A refrigerator that runs hot, leaks air, or has restricted airflow cycles longer and stresses the sealed system. Simple upkeep and quick fixes typically add years of reliable cooling and help protect food temperatures.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10650045717, the model number is printed on the appliance identification label. On most units, you will find that label inside the fresh food (refrigerator) compartment along the side wall or near the ceiling, where it is easy to read with the door open.

Common places to check first

• Inside the refrigerator compartment on the left or right side wall
• On the ceiling of the refrigerator compartment near the light housing
• On the frame around the refrigerator opening (the cabinet face) when the door is open
• Behind the base grille area (less common, but worth checking if you cannot find it inside)

What the label typically includes

The same label usually lists both the model and serial information.

What you need	What it’s used for	Where you’ll use it
Model number (10650045717)	Matching parts and diagrams	Parts lookup and ordering
Serial number	Date and production info	Service and warranty records

Tips to find it quickly

• Use a flashlight and look for a white or silver sticker with a barcode.
• Wipe condensation or food residue off the liner so the print is readable.
• If the label is inside the compartment, check both sides and the top before pulling the refrigerator out.

Why it matters

Using the exact model number ensures we match the correct Kenmore parts (like a door switch, door gasket, or ice container) and the correct procedures for door removal, leveling, and alignment.

For diagrams and model-specific details, use the 10650045717 owner’s manual.

Last updated: February 2026