Owner’s manual
View engine
How to find Craftsman model number?
For your Craftsman walk-behind mower model 917376655, we find the model and serial number on a decal on the rear of the lawn mower housing. Use that exact model number when ordering parts or looking up specifications in the 917376655 owner's manual.
Where to look on model 917376655
Check these common spots on the mower body first:
- Rear of the mower deck/housing (most common on this model)
- Near the rear discharge door area
- On the deck surface close to the engine mounting area
- On the handle bracket area (less common)
What to write down (and why)
Record both numbers exactly as shown:
- Model number (example format: 917.376655)
- Serial number (unique to your mower)
- Date of purchase (helpful for maintenance tracking)
Why it matters
The model number identifies the correct parts list and diagrams; the serial number can matter when a model has production changes. Using the exact ID helps you avoid ordering the wrong blade, belt, or drive components.
Quick ID guide
| What you see on the decal | What it’s used for |
|---|---|
| Model number (917.376655) | Matching parts and diagrams |
| Serial number | Confirming version/production run |
| Engine info (Briggs & Stratton details) | Engine-specific tune-up parts |
Parts tip for this model
Once you confirm the model number, match wear items by the model, not by appearance. For example, if you’re replacing the cutting blade on this mower, use a model-matched part such as the lawn mower 22-in deck mulching blade 532406713.
Last updated: January 2026
What are the common problems with Craftsman lawn mowers?
On the Craftsman walk-behind mower model 917376655, the most common problems are no-start or hard-start, loss of self-propel drive, excessive vibration, and uneven or poor cutting. These issues usually trace to fuel quality, ignition maintenance, deck buildup, or normal wear items listed in the 917376655 owner’s manual.
Most common symptoms on model 917376655
- Won’t start / hard starting: stale fuel, dirty air filter, fouled spark plug, water in fuel
- Starts then stalls or loses power: grass packed under the deck, dirty air filter, incorrect oil level
- Vibrates too much: bent blade, loose blade bolt, damaged blade adapter
- Self-propel weak or won’t move: worn drive belt, debris in drive wheels, transmission wear
- Uneven cut: wheels set at different heights, dull blade, deck buildup
Quick checks we recommend first
- Disconnect the spark plug wire before inspecting the blade or underside of the deck.
- Drain old fuel and refill with fresh regular unleaded gasoline (especially after storage).
- Clean grass and debris from under the deck and under the drive cover.
- Verify all wheels are set to the same cutting height.
- Inspect the blade and blade adapter for damage, then tighten hardware to spec.
Parts that commonly solve these problems (examples for 917376655)
| Symptom | Likely wear item | Example compatible part |
|---|---|---|
| Excessive vibration or poor cut | Blade | Lawn mower 22-in deck mulching blade 532406713 |
| Vibration, blade won’t stay tight | Blade adapter | Lawn mower blade adapter 532421176 |
| Self-propel slips or won’t pull | Drive belt | Belt 532157769 |
Why it matters
Fixing these symptoms early helps prevent engine overload, reduces vibration that can damage components, and restores cut quality. Routine cleaning and tune-up maintenance also improves starting reliability and extends mower life.
Last updated: January 2026
What company makes Craftsman lawn mowers?
For Craftsman walk-behind mower model 917376655, Craftsman is the brand name, but the mower’s engine is clearly identified in the documentation as a Briggs & Stratton 625 Series. The company that built the mower deck and drive system can vary by production contract, so the best confirmation is the ID decal and the parts breakdown in the 917376655 owner’s manual.
What we can confirm for model 917376655
From the model-specific manual, we can verify key manufacturer information tied to this mower:
- Engine is Briggs & Stratton 625 Series
- Mower is a power-propelled 22-inch multi-cut walk-behind design
- The manual includes a repair parts section and operating specifications
How to identify who built the mower (deck/drive) on your exact unit
Use the mower’s identification label to determine the original equipment manufacturer (OEM) for the chassis:
- Find the model and serial decal on the rear of the mower housing
- Record any secondary numbers (sometimes an OEM or chassis number)
- Compare the decal details to the repair parts listings
- Match your configuration (mulch, bag, side discharge) to the diagrams
- Use the exact model number when ordering parts
Quick guide: engine maker vs mower maker
| Item on the mower | What it tells you |
|---|---|
| Briggs & Stratton label | Engine manufacturer (confirmed for this model) |
| Craftsman name | Brand, not necessarily the OEM |
| Chassis/OEM-style number on decal | Often identifies who built the mower itself |
Why it matters
Knowing the engine maker helps with tune-up parts and starting issues; knowing the mower OEM helps ensure correct fit for deck and drive parts like blades, belts, and wheels.
Parts tip for this model
If you’re maintaining the cutting system, use the blade listed for this model, such as the lawn mower 22-in deck mulching blade 532406713.
Last updated: January 2026
