KitchenAid
Stand Mixer

Model #KSM3316PHW0 KitchenAid mixer

Here are the diagrams and repair parts for KitchenAid KSM3316PHW0 mixer, as well as links to manuals and error code tables, if available.

There are a couple of ways to find the part or diagram you need:

  • Click a diagram to see the parts shown on that diagram.
  • In the search box below, enter all or part of the part number or the part’s name.

Not all parts are shown on the diagrams—those parts are labeled NI, for “not illustrated”.

We encourage you to save the model to your profile, so it’s easy to access parts and manuals for your appliance whenever you log in.

For DIY troubleshooting advice and repair guides, visit our repair help section.

    Showing 10 of 108 parts

    Stand Mixer Retainer Pin#15

    Case, motor and planetary unit parts Diagram

    Pin-groove

    Part #9705443
    Replaced by #WP9705443
    ?
    Manufacturer substitution
    This part replaces 9705443. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $5.09
    Stand Mixer Foot#9

    Base and pedestal unit parts Diagram

    Foot

    Part #9709707
    Replaced by #WP9709707
    ?
    Manufacturer substitution
    This part replaces 9709707. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $5.09
    Dryer Idler Pulley Retainer Clip#11

    Base and pedestal unit parts Diagram

    Ring

    Part #354987
    Replaced by #WP354987
    ?
    Manufacturer substitution
    This part replaces 354987. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $8.69
    Stand Mixer Screw

    See All Related Diagrams

    Screw

    Part #3400814
    Replaced by #WP3400814
    ?
    Manufacturer substitution
    This part replaces 3400814. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $5.09
    Planetary Assembly#21N

    Case, motor and planetary unit parts Diagram

    Planetary assembly

    Part #W10765474
    In Stock
    $66.09
    PEDESTAL (MATTE BLACK VIOLET)#7D

    Base and pedestal unit parts Diagram

    In Stock
    $73.16
    PLANETARY & SHAFT ASSEMBLY (INK BLUE)#21J

    Case, motor and planetary unit parts Diagram

    In Stock
    $49.60
    UPPER HOUSING (MATTE AVOCADO)#1A

    Case, motor and planetary unit parts Diagram

    In Stock
    $50.38
    LOWER HOUSING (MATTE MILKSHAKE)#3L

    Case, motor and planetary unit parts Diagram

    In Stock
    $43.73
    LOWER HOUSIN#3H

    Case, motor and planetary unit parts Diagram

    Lower housin

    Part #W10765437
    In Stock
    $51.96

    Symptoms common to all stand mixers

    Choose a symptom to see related stand mixer repairs.

    Main cause: attachment clearance setting needs adjustment
    Main causes: lack of electrical power, wiring failure, worn carbon motor brushes, bad drive motor, tripped overload switch, control problems
    Main causes: bad lubricating grease, mixer sitting idle for weeks at a time, mixer running constantly for more than 30 minutes
    Main cause: worn carbon motor brushes
    Main causes: phase control board failure, wiring connection problem, faulty electronic control board
    Main causes: bad wiring connections, faulty speed control plate, electronic control board failure
    Main causes: bad worm gear, damaged planetary gear assembly

    Repair guides common to all stand mixers

    These step-by-step repair guides will help you safely fix what’s broken on your stand mixer.

    September 20, 2015
    By Lyle Weischwill
    How to replace a stand mixer worm gear

    Here’s how to replace the worm gear in your stand mixer if it’s worn or damaged.

    Repair difficulty
    Time required
     30 minutes or less
    September 20, 2015
    By Lyle Weischwill
    How to replace a stand mixer phase control board

    The phase control board works with the governor and control plate to control motor speed. Replace the phase control board if defective.

    Repair difficulty
    Time required
     30 minutes or less
    September 1, 2015
    By Lyle Weischwill
    How to replace stand mixer motor brushes

    If the carbon brushes are worn and damaged, replace them using these steps.

    Repair difficulty
    Time required
     15 minutes or less

    Articles and videos common to all stand mixers

    Use the advice and tips in these articles and videos to get the most out of your stand mixer.

    August 18, 2021

    Using a wiring schematic to trace a current video

    By Sears PartsDirect staff

    Find out what’s wrong with your appliance by following a circuit.

    December 2, 2015

    How to make Irish shortbread toffee bars

    By Sears PartsDirect staff

    These toffee bars combine caramel and chocolate in layers for an ooey-gooey treat.

    September 1, 2015

    Stand mixer common questions

    By Sears PartsDirect staff

    These common questions and answers can help you make the most of your stand mixer.