Whirlpool GD5THGXKS03 side-by-side refrigerator Parts

Most Whirlpool side-by-side refrigerators like model GD5THGXKS03 are approximately 33 to 36 inches wide, 65 to 71 inches tall, and 30 to 35 inches deep (depth varies most depending on handles and door swing). For the exact cabinet and overall dimensions for your unit, use the measurements and clearances listed in the installation guide.

How to get the right measurements (what to measure)

Use a tape measure and record these three numbers:

• Width: left to right across the front of the cabinet
• Height: floor to top of cabinet (and note hinge height if it sticks up)
• Depth: front of doors to back of cabinet (measure with handles and without handles if possible)
• Door swing clearance: space needed to fully open doors and pull out bins
• Ventilation clearance: space behind and above the refrigerator for airflow

Typical dimension ranges (quick reference)

These ranges help with planning, but the installation guide gives the model-specific numbers.

Measurement	Typical range for Whirlpool side-by-side	What changes it most
Width	33 to 36 in.	Cabinet size class
Height	65 to 71 in.	Hinge design, leveling legs
Depth	30 to 35 in.	Handles, door thickness

Why it matters

Getting the dimensions right prevents delivery and fit issues, and it also helps avoid cooling problems caused by tight clearances that restrict airflow around the condenser and compressor area.

If you are measuring for a replacement

• Measure the opening (width, height, depth) in three spots (top, middle, bottom)
• Confirm you can remove doors or trim if needed for delivery
• Plan for water line routing if you use a filter, ice maker, or dispenser (common parts include the refrigerator inlet valve W10408179 and refrigerator water filter EDR5RXD1)

Last updated: February 2026

On Whirlpool side-by-side refrigerators, the model number is printed on the appliance rating label. For GD5THGXKS03, check inside the fresh food compartment first; the label is commonly on a side wall near the crisper area or along the door frame.

Where to look (most common spots)

• Inside the refrigerator section on the left or right wall
• On the ceiling of the fresh food compartment near the light housing
• Along the door frame (hinge side) when the refrigerator door is open
• Behind the lower toe grille or near the front base (less common)
• On the back exterior panel (least convenient, but possible)

What the label looks like

The rating label usually includes:

• Model (for example, GD5THGXKS03)
• Serial number
• Electrical ratings (volts/amps)
• Sometimes a manufacturing date code

Why the exact model number matters

Small model-number differences can change which parts fit, especially for water and ice components.

System	Parts that often vary by model	Example part on this model
Water filtration	Filter type, housing	Refrigerator water filter EDR5RXD1
Ice maker	Ice maker assembly, bin	Ice maker assembly 4317943
Doors and sealing	Gaskets, trim, cams	Door trim and closer parts

Tips for using the model number

• Copy it exactly, including all letters and numbers.
• If the label is worn, take a clear photo and zoom in.
• Use the model number to match diagrams and procedures in the installation guide.

Last updated: March 2026

A Whirlpool side-by-side refrigerator like model GD5THGXKS03 typically lasts 13 years with normal household use and basic maintenance. Keeping airflow clear, cleaning the condenser area, and staying on top of water and ice system upkeep helps you reach that lifespan.

What affects lifespan most

• Room temperature and ventilation around the cabinet
• Condenser cleanliness (dust and pet hair raise compressor load)
• Door seal condition and how often doors are opened
• Water quality and filter changes for the dispenser and ice maker
• Defrost system health (prevents frost buildup and warm temps)

Maintenance checklist (high impact)

• Replace the water filter on schedule; use the correct refrigerator water filter EDR5RXD1.
• Keep the condenser area clean and unobstructed.
• Confirm doors close fully and gaskets seal all the way around.
• If ice production slows, check for restricted water flow and consider the refrigerator inlet valve W10408179 if the valve is weak or leaking.
• Review leveling and door closing details in the installation guide.

Common “end-of-life” symptoms vs. fixable issues

Symptom	Often fixable?	Common area to check
Warm fridge/freezer but lights work	Sometimes	Airflow, defrost system, fans
No ice or slow ice	Often	Filter, inlet valve, ice maker
Water tastes/looks off	Often	Water filter, housing
Loud buzzing/clicking at back	Sometimes	Fan, compressor start components

Why it matters

Knowing the typical 13-year lifespan helps you decide whether to maintain and repair (filters, valves, ice maker parts) or plan for replacement when major sealed-system components start failing.

Last updated: March 2026