Frigidaire LFHT2117LB0 refrigerator Parts

In a Frigidaire LFHT2117LB0 top-mount refrigerator, the upper compartment is the freezer. It is designed to keep foods frozen and, on models equipped for it, supports ice maker operation when the freezer temperature is maintained correctly (see the LFHT2117LB0 installation guide).

In most top-mount refrigerators, the freezer section houses key cooling and airflow components that help both compartments stay at the right temperature.

Common freezer-area items include:

• Freezer shelves and door racks
• The evaporator area (where cold is produced)
• Air passages that send cold air to the fresh food section
• Ice maker components (if installed and turned ON)
• Door gasket and hinges that keep warm air out

Knowing the upper section is the freezer helps when troubleshooting temperature issues. For example, if the freezer door is not sealing, warm air can enter, causing frost buildup and poor cooling performance in both the freezer and refrigerator.

If you suspect an air leak, a common fix is inspecting the door seal and alignment. Our DIY help on how to fix a fridge door seal walks through what to check.

During setup, we look for these freezer-related checks:

• Door seals completely to the cabinet on all sides
• Freezer door is level across the top
• Refrigerator is level and tilted slightly front to back (about 1/4 inch)

Last updated: February 2026

A top-mount refrigerator like the Frigidaire LFHT2117LB0 puts the freezer on top and the fresh-food section below, which many households find practical and efficient. This layout typically offers straightforward organization, easy access to frozen foods, and a classic design that fits most kitchens.

• Frozen foods at eye level: The upper freezer makes it easier to see and grab frequently used frozen items.
• Simple, familiar layout: Many people prefer the traditional top-freezer organization for quick loading and unloading.
• Often strong usable fridge space: The lower fresh-food compartment is usually wide and easy to organize with shelves, bins, and crispers.
• Typically easier door sealing checks: You can quickly confirm the doors seal fully on all sides during setup.
• Straightforward setup and leveling: Installation steps are usually simple, including leveling and door alignment.

Proper installation helps any top-mount refrigerator cool evenly and avoid issues like warm spots, sweating, or door seal gaps. In the LFHT2117LB0 installation guidance, we focus on basics such as door sealing, leveling, and clearances.

• Confirm door seals completely to the cabinet on all sides.
• Level the refrigerator side to side and tilt it about 1/4 inch (6 mm) front to back.
• Allow installation clearances for airflow: 3/8 inch on sides and top, 1 inch at the back.
• If an ice maker is used, connect the house water supply and recheck for leaks after 24 hours.

For the model-specific checklist and clearances, use the installation guide.

Choosing a layout that matches how you cook and shop reduces door-open time, improves food visibility, and helps the refrigerator maintain stable temperatures with less effort.

Last updated: February 2026

If your Frigidaire LFHT2117LB0 top-mount freezer is not freezing, the most common causes are incorrect control settings, poor airflow from loading or frost buildup, a door that is not sealing, or a failed evaporator fan or defrost component. Start with the control settings and door seal checks in the installation guide.

• Confirm the freezer control was set correctly; after changing controls, wait 24 hours before adjusting again.
• Make sure the freezer door closes fully and the gasket seals all the way around.
• Check for heavy frost on the back freezer wall (a sign of a defrost problem).
• Listen for the evaporator fan running when the compressor is running (fan noise from the freezer area).
• Avoid blocking vents with food packages; restricted airflow prevents even freezing.
• Verify the refrigerator is level and slightly tilted back (about 1/4 inch) so doors self-close.

If basic checks point to a fan or defrost issue, these model-listed parts are common suspects:

• Refrigerator evaporator fan blade 5308000010 (damaged blade can reduce airflow)
• Refrigerator defrost bi-metal thermostat 5303918202 (can stop defrosting and cause frost blockage)

A freezer that is not freezing usually fails because cold air cannot circulate or the system cannot shed frost. Fixing airflow, leveling, and door sealing first prevents unnecessary part replacement and helps the refrigerator stabilize to normal temperatures.

Last updated: February 2026

The most common Frigidaire refrigerator complaint is not cooling properly (fresh food warm, freezer not freezing, or temperatures swinging). On the Frigidaire LFHT2117LB0 top-mount, the fastest wins are confirming control settings, airflow, and door sealing before moving to fan or defrost troubleshooting; see the LFHT2117LB0 owner's manual.

• Not cooling or weak cooling: food spoils, freezer soft ice cream, compressor seems to run a lot.
• Frost build-up in the freezer: snow or ice on the back wall, reduced airflow to the refrigerator section.
• Runs constantly: long run times, warm kitchen, dirty condenser area, door not sealing.
• Water or ice maker concerns (if equipped): slow ice, no ice, leaks at connections.

1. Give control changes time: after adjusting temperature controls, wait 24 hours before changing again (this is normal guidance for this style of refrigerator).
2. Confirm door seal and leveling: doors should seal on all sides; the cabinet should be level side-to-side and tilted about 1/4 inch (6 mm) front to back for good door closing.
3. Check airflow: do not pack items tight against vents; keep the freezer back wall clear.
4. Verify installation clearances: typical guidance is about 3/8 inch at sides and top and 1 inch at the back for airflow.

If the basics above check out and temperatures still drift, these are common next suspects:

Cooling problems are usually progressive; a small airflow restriction or a door that is not sealing can turn into heavy frost, longer run times, and unstable food temperatures. Catching the cause early helps protect food and reduces wear on the compressor.

Last updated: February 2026

Your Frigidaire refrigerator model number is printed on the appliance’s rating label, not on the box or in a generic manual. For the Frigidaire top-mount refrigerator model LFHT2117LB0, the label is typically inside the fresh food compartment around the door opening or on an interior side wall; match the full model number exactly.

Check these common label locations first:

• Inside the refrigerator (fresh food section) on the left or right interior wall
• Around the door frame (near the gasket area)
• Behind the crisper drawers (on the liner wall)
• On the ceiling of the fresh food compartment (less common)
• On the back exterior panel (if you do not see it inside)

If you are already using the parts list for LFHT2117LB0, confirm the label shows LFHT2117LB0 exactly (letters and numbers matter).

On the label, we recommend copying these fields exactly:

• Model (example format: LFHT2117LB0)
• Serial (helps date the unit and confirm production run)
• Electrical ratings (useful for service checks)

Frigidaire model numbers often differ by just 1 character, but that can change the correct door bin, door gasket, shelf trim, or even internal components. Using the exact model number helps us match the right replacement parts the first time.

If you need diagrams or door and cabinet identification details, use the LFHT2117LB0 owner's manual and the LFHT2117LB0 installation guide.

Last updated: February 2026