Frigidaire FRSS2623AS1 refrigerator Parts

For the Frigidaire FRSS2623AS1 side-by-side refrigerator, the most common issues we see are cooling and airflow problems (warm fresh-food section, freezer too cold, or uneven temperatures) and ice maker or dispenser troubles. These usually trace back to restricted airflow, dirty coils, a weak fan, a door seal leak, or a clogged water filter.

• Refrigerator section warm but freezer cold: airflow problem from the freezer to the fresh-food side
• Temps swing up and down: sensor (thermistor) issue or airflow restriction
• Unit runs a lot: often normal with a variable-speed compressor, but can also indicate heat load from dirty coils or a door not sealing
• Ice maker not making ice: ice maker off, restricted water supply, or a clogged filter
• Frost or moisture inside: door left slightly open or gasket not sealing

1. Confirm doors close and seal fully on all sides; the manual calls out door seals and door leveling as key setup checks.
2. Make sure vents inside the compartments are not blocked by food packages.
3. Set temperatures to the recommended settings and give the refrigerator time to stabilize.
4. If ice is weak or stops, replace the water filter and verify the household water valve is fully open.
5. If the display is flashing or you suspect a control issue, use the troubleshooting section in the FRSS2623AS1 owner's manual.

Cooling and ice maker complaints often share the same root cause: restricted airflow or restricted water flow. Fixing the basic causes first (sealing, airflow, filter, and settings) prevents food spoilage, reduces run time, and helps the ice maker keep up.

If you need to order parts for FRSS2623AS1, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

The Frigidaire FRSS2623AS1 side-by-side refrigerator is built for consistent, everyday cooling with convenient storage and easy access to ice and water. Key benefits include organized door and drawer storage, an automatic dispenser system, and straightforward maintenance guidance in the FRSS2623AS1 owner's manual.

• Convenient ice and water access: The automatic ice and water dispenser is designed for quick, on-demand use.
• Better organization: Side-by-side layout keeps frequently used items at eye level, with door bins and drawers to separate foods.
• Odor control support (some models): The manual describes an air filter location and replacement interval for models equipped with it.
• Clear maintenance routines: Filter replacement and care/cleaning steps are laid out so upkeep is predictable.
• Installation guidance: The manual includes clearance guidance to support airflow and easier hookups.

Your FRSS2623AS1 uses a water filtration system for the dispenser, and the manual also describes an air filter on some versions.

If you’re shopping for the water filter used on this model, we list the Frigidaire refrigerator water filter FPPWFU01 for FRSS2623AS1. You can also search by model number on Sears PartsDirect if you need additional shelves, bins, gaskets, or electronics.

Stable temperatures, good airflow clearances, and on-schedule filter changes help reduce common complaints like off-tasting ice, odors, and uneven cooling. Following the manual’s setup and maintenance guidance helps the refrigerator run efficiently and keeps food quality more consistent.

Last updated: February 2026

We treat the Frigidaire FRSS2623AS1 as a standard indoor side-by-side refrigerator; “garage ready” depends on the temperature range your garage reaches and whether the unit is approved to operate in that environment. For the most accurate operating and placement guidance, follow the FRSS2623AS1 owner's manual.

A refrigerator that is truly garage-ready is designed to keep cooling and making ice reliably when the surrounding air gets very cold or very hot. In a garage, temperature swings can cause:

• Warm garage temps: longer run times, higher energy use, and weaker ice production
• Cold garage temps: poor fresh-food cooling, freezer temperature swings, or no ice production
• More condensation: moisture around door seals and on exterior surfaces

Use these checks before you move the FRSS2623AS1:

• Measure typical garage temperatures in summer and winter (morning and afternoon)
• Confirm you have proper clearances for airflow (the manual lists clearance guidance)
• Make sure the floor is level so the doors close and seal correctly
• Verify a dedicated, properly grounded outlet is available
• Plan for a water supply connection if you use the dispenser or ice maker

Garages are harsher environments than kitchens. If the space gets outside the refrigerator’s intended operating range, you can see temperature instability, food spoilage risk, and more wear on components like the evaporator fan motor and temperature sensors.

If garage conditions lead to cooling or sealing problems, these model-matched parts are commonly involved:

• Refrigerator door gasket (gray) 241786013 (fresh-food door sealing)
• Refrigerator freezer door gasket (gray) 241786014 (freezer door sealing)
• Refrigerator temperature sensor 5303918775 (temperature feedback to controls)

If you need to order replacement parts for FRSS2623AS1, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026