Owner’s manual
View engine
Where is Craftsman's model number?
On the Craftsman walk-behind mower model 917376723, the model number is printed on the mower’s ID label and also shown on the cover of the 917376723 owner's manual. For engine service, the Briggs & Stratton engine has its own separate model-type-code stamping on the engine.
Where to look on the mower (917376723)
Check these common ID-label locations first:
- Rear of the mower deck near the discharge opening or rear door
- Top of the deck near the engine mounting area
- Handle support area (left or right side bracket)
- Near the height adjuster hardware on the deck
If the label is dirty or faded, wipe it with a damp rag and mild detergent; avoid scraping so you do not remove the printing.
Mower model number vs. engine model number
The mower model number identifies the complete Craftsman unit (deck, drive system, handle, wheels). The engine model identifies the Briggs & Stratton engine only.
| What you need | Where it’s found | Example for this mower |
|---|---|---|
| Mower model number | Mower ID label; manual cover | 917376723 |
| Engine model/type/code | Stamped into the engine shroud or valve cover area (varies by engine) | Briggs & Stratton numbers (not the same as 917376723) |
Why it matters
Using the correct mower model number helps us match the right walk-behind mower parts (like the lawn mower mulching blade 532406707 or drive components) so fit and mounting holes line up correctly.
Last updated: January 2026
What model number is a Craftsman 6.75 lawn mower?
A Craftsman “6.75” walk-behind mower is identified by the full model number on the ID label and in the documentation. For the mower on this page, the model number is 917.376723 (often written without the dot as 917376723); confirm it in the 917376723 owner's manual.
Where to find the model number on the mower
We use the model number to match the correct blade, drive belt, and control cables.
- Check the model/serial label on the mower deck (typically near the rear or side of the deck)
- Look on the handle support area near the rear door/grass bag opening
- Match the number to the cover page of the manual
- Use the full model number, including any dots or suffixes
“6.75” vs. model number: what it means
“6.75” is a power rating used on many Craftsman mowers; it is not unique enough to identify parts by itself. The model number is what ties your mower to the correct parts list and diagrams.
| What you see | What it identifies | What to use for parts |
|---|---|---|
| 6.75 / 650 Series | Engine family or marketing rating | Model number (example: 917.376723) |
| Briggs & Stratton 650 Series | Engine series | Engine model/type/code (on engine) |
| 917.376723 / 917376723 | Mower model | Correct parts and diagrams |
Parts that commonly require the exact model number
Once you confirm 917.376723, we can match common wear items precisely, such as:
- Lawn mower mulching blade 532406707 (22-in deck blade)
- Ground drive belt (often listed as a V-belt in the parts list)
- Drive control cable and engine zone control cable
- Wheel adjuster components, dust covers, and hardware
Why it matters
Using the exact model number prevents ordering a blade with the wrong center hole pattern, a belt with the wrong length, or a control cable with the wrong end fittings.
Last updated: January 2026
How old is my mower by serial number?
Your Craftsman walk-behind mower model 917376723 uses its serial number to identify the production run; we use that serial number (from the decal on the rear of the mower housing) to determine the mower’s approximate age and correct parts information.
Where to find the serial number on model 917376723
The model and serial numbers are printed on a decal located on the rear of the lawn mower housing. The same decal area is referenced in the 917376723 owner's manual.
- Look at the back of the deck (rear housing area), not the handle.
- Wipe off grass and dirt so every character is readable.
- Write down both the model number (917376723) and the serial number.
- Record the date of purchase if you still have it; it helps narrow the timeframe.
How we use the serial number to estimate age
Serial numbers typically encode a manufacturing date or batch code. Once you have the full serial number, we match it to the manufacturer’s format to estimate the build timeframe and confirm the correct parts list for your mower.
What to collect before you look up parts
| Item to record | Where you’ll find it | Why it matters |
|---|---|---|
| Model number: 917376723 | Rear housing decal | Confirms the exact mower platform |
| Serial number | Rear housing decal | Identifies the production run |
| Date of purchase (if known) | Receipt or manual notes | Helps confirm age and service history |
Why it matters
Knowing the mower’s age helps us match the right Craftsman parts and maintenance specs (like oil type, spark plug type, and blade bolt torque) so repairs and tune-ups go smoothly.
Related parts that often vary by production run
If you are ordering wear items, confirming the serial number first helps avoid mismatches.
- Blade and blade hardware
- Drive system parts (belt, pulleys, cables)
- Wheel and height adjuster components
- Handle and control parts
If your mower has drive issues, the lawn mower wont move troubleshooting video motion drive failure is a good next step, and the lawn mower drive control cable 532407816 is one common drive-control related part for this model.
Last updated: January 2026
