Maytag MGC4436BDW12 36" gas cooktop Parts

To remove the top on your Maytag MGC4436BDW12 36" gas cooktop, we start by taking off the knobs, grates, and burner caps, then remove the screws holding the burner bases so the main top can lift off. Shut off power and gas first for safety.

• Turn off electrical power to the cooktop at the breaker (ignition uses electricity).
• Shut off the gas supply valve.
• Let the cooktop cool completely.
• Protect the countertop with a towel or cardboard.
• Take a quick photo of burner parts so reassembly is easy.

1. Pull all burner knobs straight off the valve stems.
2. Lift off the burner grates.
3. Remove the burner caps.
4. Remove the screws securing each burner base to the main top.
5. Lift the main top up carefully; if it feels stuck, recheck for missed screws.

If the top is coming off because you are troubleshooting ignition or gas flow, these parts are often related:

• Cooktop igniter switch and harness assembly WPW10184468 (spark switches and wiring for burner ignition)
• Regulator W11087445 (controls gas pressure into the manifold)

Removing the main top the right way prevents cracked porcelain or stainless surfaces, stripped burner-base screws, and damaged igniter wiring. It also helps you access the manifold, spark module, and burner tubes for cleaning or repair.

Last updated: February 2026

The most common issues we see on the Maytag MGC4436BDW12 36 inch gas cooktop are burners that will not ignite or keep clicking, weak or uneven flames, and knobs that are loose or hard to turn. These problems usually trace to the ignition circuit, burner parts, or gas supply regulation.

• Burner clicks but will not light: dirty burner ports, mis-seated cap, or a weak spark path
• All burners keep clicking: stuck igniter switch, moisture, or a short in the switch harness
• One burner has a weak/uneven flame: clogged burner head/cap, orifice issue, or airflow restriction
• Flame is too high/too low on multiple burners: gas pressure/regulator problem
• Knob slips or will not turn smoothly: worn knob insert or valve stem fit issue

If troubleshooting points to a failed component, these are common repair parts for this model:

1. Turn power off to the cooktop (unplug or switch off the breaker) for 1 minute, then restore power.
2. Remove grates and caps; clean and dry the burner head ports thoroughly.
3. Re-seat the burner cap so it sits flat and centered.
4. If clicking continues after cleaning and drying, inspect the switch area under the knobs for spills.
5. If flame height is abnormal on more than one burner, have the gas supply and regulator setup checked.

Ignition and flame problems can waste gas, cause delayed ignition, and overheat nearby components. Fixing the root cause restores safe, consistent lighting and proper burner performance.

Last updated: March 2026

For your Maytag MGC4436BDW12 36" gas cooktop, we recommend buying replacement parts from Sears PartsDirect first because you can match parts to the exact model and confirm fit before ordering. You can also buy genuine Maytag parts through Maytag-authorized channels and other reputable appliance parts retailers.

• Sears PartsDirect: model-specific lookup for MGC4436BDW12 and common cooktop parts like the regulator W11087445.
• Maytag (manufacturer): good option when you want OEM parts directly from the brand.
• Authorized parts distributors: typically reliable for OEM parts and diagrams.
• Established appliance parts retailers: helpful search tools and support.
• Local appliance repair shops: convenient if you want diagnosis plus the part.

Use this quick checklist before you buy:

• Match the full model number exactly: MGC4436BDW12.
• Confirm the part’s name and function (example: regulator vs. igniter switch).
• Compare the part number on the old part when possible.
• Check whether your cooktop uses natural gas or LP (conversion parts and settings differ).
• If the part is cosmetic (knob, grate, main top), verify finish and color.

Gas cooktops are sensitive to fit and gas flow. Ordering by the exact model number (MGC4436BDW12) helps ensure safe operation, proper flame pattern, and fewer returns.

Last updated: February 2026