Kenmore 1068282381 upright freezer Parts

We size Kenmore upright freezer model 1068282381 by the capacity printed on the model and rating label inside the cabinet. For planning purposes, most full-size Kenmore upright freezers are 15 to 20 cu. ft., but the label gives the exact cubic feet for your unit.

Look for the model and rating label (commonly on an inside side wall near the top, or around the lower front/kick plate area). It will list the capacity as cu. ft. or total volume.

• Check the label for “Capacity”, “Total volume”, or “cu. ft.”
• Write the number exactly as shown (example: 17.2 cu. ft.)
• If the label is hard to read, take a clear photo and zoom in
• Confirm the model number matches 1068282381 before comparing specs
• If you need help locating the label, use how to find your appliance model number (and what it means for parts)

Knowing the exact cubic feet helps you compare similar Kenmore models, estimate how much food you can store, and plan shelf and bin organization.

If you are already accessing interior panels while checking labels, a common control part on many uprights is the thermostat 4389248, which regulates cabinet temperature.

Last updated: January 2026

Most Kenmore upright freezers, including model 1068282381, do not have a single dedicated “reset” button. A reset is usually done by power-cycling the freezer or, on some electronic-control versions, using a control-panel key sequence; the exact method depends on the control style.

• Power reset (works on all versions): unplug the freezer for 5 minutes, then plug it back in.
• Breaker reset: if you cannot reach the plug, turn the circuit breaker OFF for 5 minutes, then back ON.
• Control-panel reset (some electronic models): press and hold Temp Up and Temp Down together for about 5 seconds (only if your freezer has those buttons).
• Door switch check: open and close the door firmly to be sure the door switch is engaging.
• After reset: allow 24 hours for temperatures to fully stabilize.

If the freezer still will not cool, runs constantly, or will not start after a reset, focus on the most common causes:

A failed temperature control thermostat can prevent normal cycling. For this model’s parts list, the control option shown is the thermostat 4389248.

A “reset” clears minor control glitches and restarts the cooling cycle, but it will not correct a failed thermostat, sealed-system issue, or airflow problem. Using the right reset method helps you avoid unnecessary part swaps and protects stored food.

Last updated: January 2026

The most common issues we see with the Kenmore 1068282381 upright freezer are warm temperatures, heavy frost buildup, unusual noises, and the unit not running at all. These problems usually trace to airflow restrictions, a defrost failure, or a temperature control issue such as the thermostat 4389248.

• Freezer not cold enough: blocked vents, dirty condenser area, weak door seal, or a control/thermostat problem
• Frost or ice building up fast: door left ajar, gasket leak, or defrost system trouble
• Runs constantly: warm room conditions, frequent door openings, poor airflow, or temperature control set too cold
• Clicking or buzzing: compressor start/relay or wiring connection issues
• No power or dead unit: outlet/cord issue, failed control, or internal wiring problem

1. Set the temperature to a mid-range setting and wait 24 hours for stabilization.
2. Confirm the door closes tightly; check for torn gasket areas and ice preventing a full seal.
3. Make sure packages are not blocking interior air vents.
4. Clean dust from the condenser area (unplug first).
5. If you suspect an electrical issue, use safe testing practices and follow a proven guide like how to use a multimeter to test electrical parts video.

An upright freezer depends on steady airflow and tight door sealing to hold safe temperatures. Catching a defrost or temperature-control problem early helps prevent food thawing, excessive compressor run time, and heavy ice buildup.

Last updated: March 2026