Kenmore Elite 79042800500 electric cooktop Parts

On the Kenmore Elite cooktop model 79042800500, you unlock the controls by touching and holding the LOCK keypad for about 5 seconds while the cooktop is OFF. You should hear a beep and the lock indicator light turns off, confirming it is unlocked (see the owner's manual).

Quick unlock steps

• Make sure all cooking zones are off.
• If the cooktop is on, touch and hold POWER until it turns off.
• Touch and hold the LOCK keypad for about 5 seconds.
• Listen for the beep.
• Confirm the lock indicator light is OFF.
• Turn the cooktop back on (touch and hold POWER for about 2 seconds) and select a cooking zone.

What you should see (locked vs. unlocked)

Status	What it means	What to do
Lock indicator light ON	Controls lock is active; zones will not heat	Hold LOCK about 5 seconds to unlock
Lock indicator light OFF	Controls are unlocked	Use POWER and the cooking zone controls normally

Common reasons it will not unlock

• Cooktop is not fully OFF: The lock feature only works correctly when the cooktop is switched off.
• Not holding long enough: This model uses a longer press (about 5 seconds), not a quick tap.
• Touchpad not registering: Wipe the control area dry and try again with a firm, steady press.

Why it matters

The controls lock prevents accidental activation of the induction elements, which helps avoid unintended heating and protects the touch controls from being triggered during cleaning.

Last updated: February 2026

Yes. The Kenmore Elite 79042800500 is part of Kenmore’s premium “Elite” line, which is positioned above standard Kenmore models and typically includes higher-end features and styling for performance-focused cooking. For model-specific features and operating details, use the owner's manual.

What “high end” means for this cooktop

Kenmore Elite cooktops are generally considered high end because they focus on advanced cooking performance and a more premium user experience.

Common “Elite” traits include:

• More precise heat control and faster response than basic electric cooktops
• A more advanced control interface (often touch controls)
• Built-in safety and diagnostic display messages
• Premium fit and finish compared with entry-level models
• More complex electronics (which can mean more specialized parts when repairs are needed)

How to judge it in practical terms

“High end” is most useful when it translates into daily benefits: speed, control, and consistency.

What you care about	What to look for on 79042800500	Why it matters
Control and responsiveness	Induction-style behavior and display feedback	More consistent simmering and quicker adjustments
Ease of use	Touch controls and clear indicators	Fewer guesswork settings
Serviceability	Availability of model-specific parts	Faster, more accurate repairs

Parts that support premium features

Higher-end cooktops often rely on control electronics and interface components. If you’re troubleshooting power, heating, or control issues, these model-matched parts are commonly involved:

• Induction power control board 318347100
• Touch control 318330701
• Interface cable 318402405

Why it matters

A “high-end” cooktop like the Kenmore Elite 79042800500 typically delivers better cooking precision, but it also uses more electronics. That makes correct diagnosis important before replacing parts; the owner's manual helps you match symptoms to display messages and operating checks.

Last updated: February 2026

On your Kenmore Elite induction electric cooktop model 79042800500, the model and serial information is printed on the appliance rating plate (serial plate). Use that exact model number to match the correct cooktop parts and wiring; the location is listed in the owner's manual.

Where to look on this cooktop

For a built-in Kenmore Elite induction cooktop, the rating plate is typically found in one of these places:

• On the underside of the cooktop chassis (viewed from the cabinet below)
• Near the electrical junction box area under the cooktop
• On a side rail or support bracket under the glass top
• On the bottom cover label (if your unit has a bottom cover)

Safe steps to find it

Induction cooktops are 240-volt appliances; shut off power before reaching under the unit.

• Turn off the cooktop circuit breaker
• Use a flashlight to scan the underside for a white or silver label
• Record the full model number and serial number exactly as printed
• Take a clear photo if the label is worn or hard to read
• If the cooktop sits over an oven, look from the cabinet access area below (not from above the glass)

What the model number may look like

Kenmore model labels often show a “series” format and the full model number.

Label item	Example you might see	What to write down
Model series	790.4280*	Helpful reference
Full model number	79042800500	This is the one to use for parts
Serial number	(varies)	Useful for service records

Why it matters

Kenmore Elite induction cooktops can use different touch controls, elements, and wiring harnesses across close model numbers. Using 79042800500 prevents ordering the wrong component and avoids fit or performance issues.

Last updated: February 2026