Kenmore Elite 25357102600 refrigerator Parts

On Kenmore Elite refrigerator model 25357102600, the ER IF code points to an ice fan problem in the freezer area. That fan pushes cold air through the door ducting to keep the ice maker compartment cold; when airflow drops, the control reports ER IF.

What to check first (quick troubleshooting)

• Power reset: unplug the refrigerator for 5 minutes, then restore power.
• Make sure freezer vents and the ice chute area are not blocked by packages.
• Look for frost or ice buildup around the fan cover inside the freezer (restricted airflow can trigger ER IF).
• Confirm the freezer door closes tightly and the gasket seals all the way around.
• Listen for the ice fan: a steady fan sound is normal; grinding, squealing, or silence points to a fan issue.

Common causes and the most likely fixes

What’s happening	Typical cause	What usually fixes it
Fan is noisy or not spinning	Ice buildup or failing fan components	Defrost/clear ice; inspect fan blade and wiring
Fan runs but airflow is weak	Frost restriction in air passages	Address defrost issue; clear blocked ducts
Error returns after reset	Control or sensor feedback issue	Check connections; test fan circuit and controls

If you find heavy frost in the freezer, focus on the defrost system because a defrost failure can ice up the fan area and reduce airflow. A common defrost-related part on this model is the refrigerator defrost bi-metal thermostat 5303918214.

Why it matters

The ice fan is what keeps the ice maker compartment at the right temperature. When it cannot move enough cold air, ice production drops, cubes can melt and refreeze, and the refrigerator may run longer than normal.

Where to find model-specific steps

For the exact fan location, access panels, and any model-specific diagnostics for 25357102600, follow the 25357102600 owner's manual.

Last updated: January 2026

Common problems on the Kenmore Elite 25357102600 side-by-side refrigerator include warm temperatures from airflow issues, frost buildup from defrost or door-seal problems, water and ice dispenser troubles, and unusual noises from fans or the compressor area. We troubleshoot these by checking settings, airflow, and a few key service parts.

Most common symptoms and what usually causes them

• Not cooling or temperatures too warm: doors opened often, controls set too warm, blocked vents, dirty condenser coils, or a failed evaporator fan.
• Excessive frost or ice buildup: door not sealing, door left slightly open, or a defrost system issue.
• Water dispenser slow or no water: clogged water filter, kinked supply line, or a valve issue.
• Ice maker issues: restricted water flow, freezer too warm, or dispenser/ice path blockage.
• Noisy operation (buzzing, rattling, clicking): fan blade hitting ice, loose items, or compressor/start component noise.

Quick checks we recommend first (no parts needed)

• Confirm temperature controls are set correctly; after changes, allow 24 hours for temperatures to stabilize.
• Make sure doors fully close and nothing is holding them open.
• Check for blocked air vents inside the refrigerator and freezer.
• Clean condenser coils and verify the unit has proper airflow around it.
• If the unit seems “off,” check whether the cooling system was disabled at the control panel; unplugging is required to fully remove power.

Parts that commonly solve these problems

Symptom	Common fix	Example part for this model
Bad taste/odor, slow water flow	Replace water filter	Genuine Kenmore refrigerator water filter WF2CB
Frost around door edges, warm spots	Replace door gasket	Refrigerator freezer gasket 241786014
Warm fridge/freezer, fan noise	Inspect fan blade for damage/ice contact	Refrigerator evaporator fan blade 5308000010

Why it matters

Warm temperatures and frost buildup usually get worse over time; they can lead to food spoilage, higher energy use, and extra strain on the sealed refrigeration system. Catching airflow and door-seal issues early prevents bigger repairs.

For model-specific operating details (temperature controls, filter release button location, and safety steps), follow the 25357102600 owner's manual. You can also use our DIY guide how to replace the water filter in a Kenmore refrigerator when water flow or taste points to a clogged filter.

Last updated: January 2026

Kenmore Elite refrigerators (including model 25357102600) are sold under the Kenmore brand and were produced for Sears by major appliance manufacturers. The exact manufacturer can vary by model and production run, so we recommend confirming by checking the identification label and the 25357102600 owner's manual.

How to identify who built your Kenmore Elite 25357102600

Use these quick checks to match the unit to its original manufacturer family:

• Look for the model and serial tag inside the fresh food compartment (often on a side wall).
• Note the full model number (25357102600) and serial number.
• Check for a manufacturer prefix pattern; many Kenmore models use number prefixes tied to a supplier.
• Compare the control panel layout and dispenser style to the diagrams in the 25357102600 owner's manual.
• If you are ordering maintenance items, match parts by model, not by guessed manufacturer.

Why the manufacturer matters (and when it does not)

For most repairs, the most important thing is ordering parts that fit Kenmore Elite 25357102600, because parts compatibility is model-specific.

• Matters most for: service procedures, wiring layouts, and control board variations.
• Matters less for: routine maintenance items like filters, bulbs, and door bins.

Common parts customers replace on this model

If you are maintaining performance, these are frequently replaced items for this refrigerator:

• Genuine Kenmore refrigerator water filter WF2CB (water taste, flow, and ice quality)
• Refrigerator air filter AFCB (odor control)
• Refrigerator light bulb 316538904 (interior lighting)

Quick reference table

What you need	Best way to choose	Example part for 25357102600
Water filtration	Match by model number	WF2CB water filter
Odor control	Match by model number	AFCB air filter
Interior light	Match by part ID	316538904 light bulb

Why it matters

Kenmore is a brand label, and different manufacturers built different Kenmore Elite refrigerators over the years. Using the model number 25357102600 to select parts and follow the correct procedures prevents fit issues, leaks, and repeat failures.

Last updated: January 2026

For Kenmore Elite refrigerator model 25357102600, the cubic-foot capacity is the total storage volume (fresh food plus freezer) shown in the specifications information for your exact model. The fastest way to confirm it is to check the 25357102600 owner's manual and the model and serial (rating) label inside the refrigerator.

Where to find the exact cubic feet for model 25357102600

Use these model-specific places first so you get the correct total capacity for your exact configuration.

• Check the Specifications section in the 25357102600 owner's manual.
• Look for the model and serial (rating) label inside the fresh food compartment (commonly on a side wall).
• If the label lists fresh food and freezer volumes separately, add them together for total cubic feet.
• If you see multiple numbers, use the one labeled total or capacity (not dimensions).

What you will typically see on the label

Label wording	What it means	What to do
Total volume (cu. ft.)	Combined refrigerator + freezer space	This is your cubic feet
Fresh food volume + freezer volume	Separate compartment volumes	Add them for total
Dimensions (H x W x D)	Physical size, not storage volume	Do not use for cubic feet

Why it matters

Cubic feet is the standard way to compare storage space between refrigerators. It also helps when planning shelf and bin layouts, organizing airflow, and deciding how much food you can store without blocking vents.

Last updated: January 2026