Jenn-Air JGD8345ADB gas counter unit cooktop Parts

The model number is on the cooktop’s rating label; on Jenn-Air downdraft gas cooktops like model JGD8345ADB, it’s typically located on the underside of the cooktop near the burner box area or on the chassis where it’s visible after you open the cabinet below. Confirm the exact label location in the JGD8345ADB owner's manual.

• Inside the base cabinet below the cooktop, look up at the underside of the unit
• Along the metal chassis near the gas valve/manifold area
• Near the downdraft vent housing (still on the underside)
• On a label that lists model and serial numbers together

Most rating labels include:

• Model number (example: JGD8345ADB)
• Serial number
• Gas type (natural gas or LP conversion info)
• Electrical rating (volts/amps)

We use the full model number to match the correct diagrams and parts. Even small suffix differences can change items like an igniter, burner valve, or downdraft filter.

Last updated: March 2026

A gas cooktop like the Jenn-Air JGD8345ADB typically lasts 15 years with normal use and routine cleaning. Lifespan is most affected by burner ignition wear, valve condition, and keeping the downdraft vent and grease filter clean; maintenance details are in the JGD8345ADB owner's manual.

• How often the burners are used (daily cooking vs. occasional)
• Cleaning habits (keeping ports clear and spills off igniters)
• Ventilation upkeep (grease filter cleaned or replaced on schedule)
• Gas quality and proper flame adjustment
• Avoiding liquid intrusion into switches and igniter wiring

These are typical wear items on downdraft gas cooktops:

• Igniters and electrodes
• Burner valves and valve switches
• Grease filter for the downdraft vent
• Blower components (wheel, relay)

Knowing the expected service life helps you decide whether to repair a no-ignite burner, weak downdraft airflow, or a sticking valve. Replacing a few wear parts often restores performance for years.

Last updated: March 2026

For the Jenn-Air JGD8345ADB gas cooktop, the most commonly replaced parts are ignition components and downdraft vent items. If you have burners that won’t light or constant clicking, start with the igniter and electrode; for poor venting, check the grease filter. Use the JGD8345ADB owner's manual for cleaning and basic checks before replacing parts.

• Range surface burner igniter 74004053 (no spark, weak spark, or intermittent ignition)
• Cooktop burner igniter electrode WP74006072 (spark but no reliable lighting, damaged electrode tip)
• Igniter assembly WP74005890 (complete ignition component replacement)
• Range downdraft vent grease filter WP707929 (reduced airflow, greasy odors, visible buildup)
• Cooktop burner valve WP74006156 (burner won’t adjust properly, valve stem issues)

• Clicking continues after flame is lit: often a dirty/wet electrode or a failing switch
• Burner won’t light but you smell gas: ignition issue, stop and ventilate, then troubleshoot
• Yellow, uneven flame: clogged burner ports or incorrect air/gas mix
• Downdraft is loud or weak: filter restriction or blower wheel problem

Matching the symptom to the correct part prevents repeat repairs. On gas cooktops, ignition and airflow problems are frequently caused by buildup and moisture, so cleaning checks can save time and cost.

Last updated: March 2026