Kenmore 72180513600 microwave/hood combo Parts

The Kenmore 72180513600 microwave/hood combo has a 1.7 cubic foot oven capacity. For the most reliable confirmation for your exact unit and configuration, we recommend checking the specifications section in the 72180513600 owner's manual.

Capacity helps you judge what will fit (casserole dishes, dinner plates, covered bowls) and how evenly food heats as it rotates on the glass turntable. It also helps when comparing replacement units or planning cabinet clearance above a range.

• Look in the “Getting to know your microwave” or specifications area of the 72180513600 owner's manual.
• Check the model tag to confirm the full model number matches 72180513600.
• Measure the interior cavity (width x depth x height) only if you need a rough comparison; published capacity is the best reference.
• If you are replacing the microwave, compare both capacity and cutout requirements from the 72180513600 installation guide.

Capacity does not change when you replace common service parts (like a fuse, door switch, or light). If your microwave is not heating, capacity is not the cause; heating issues typically involve high-voltage components.

• Helpful troubleshooting reference: why is my microwave not heating

Last updated: February 2026

Kenmore microwaves are a solid, dependable choice for most kitchens; they are designed for everyday cooking convenience and long-term use when they are installed correctly and maintained. For the Kenmore 72180513600 microwave/hood combo, following the care and operating guidance in the 72180513600 owner's manual helps keep performance consistent.

A microwave/hood combo has to do two jobs well: heat food evenly and vent cooking smoke and odors. In this style of unit, overall satisfaction usually comes down to reliability, ease of use, and how well it fits your cooking habits.

Common strengths customers look for:

• Straightforward controls for daily cooking and reheating
• Built-in exhaust fan and cooktop light for range-top use
• Turntable cooking for more even heating
• Easy-to-clean interior surfaces with routine care

For Kenmore microwave/hood combos like model 72180513600, the magnetron is the core heating component. The manual describes a limited magnetron warranty period beyond the first year, which is a positive sign for long-term support.

Even a good microwave can seem “bad” if it is installed incorrectly, under-vented, or not maintained.

We recommend these checks:

• Confirm the unit is installed and vented as intended using the installation guide
• Keep the door and frame contact areas clean so the door seals properly
• Use microwave-safe cookware (avoid metal unless the manual allows a rack for specific uses)
• If heating performance drops, review symptoms using why is my microwave not heating

A microwave/hood combo is used daily and sits over your range; good performance means safer operation, better cooking results, and better ventilation while you cook.

Last updated: February 2026

To reset your Kenmore microwave/hood combo model 72180513600, we recommend doing a simple power reset first; if the control panel is locked, cancel Child Lock by holding the correct key for about 4 seconds. Then re-set the clock and test operation using the steps in the 72180513600 owner's manual.

• Power reset: Unplug the microwave (or switch off the breaker) for 1 minute, then restore power.
• Clear the keypad: Touch STOP/Clear to cancel a cooking cycle or clear an entry.
• Cancel Child Lock: Touch and hold STOP/Clear until LOCKED disappears (about 4 seconds).
• Re-set the clock: After power is restored, set the time of day so normal functions return.
• Test heating: Heat 1 cup of water for 1 minute to confirm operation.

After a power interruption or unplugging, this model typically prompts you to set the time of day.

A “reset” fixes most temporary control glitches caused by a power blip, a stuck keypad entry, or an enabled safety lock. If the microwave still will not run after a reset, the issue is usually a door switch, fuse, or another electrical component that needs troubleshooting.

• Confirm the door closes firmly and latches normally
• Try a different outlet (if accessible) to rule out a power supply issue
• If it is completely dead, a blown fuse is a common cause; see how to replace a microwave fuse
• If it runs but does not heat, use why is my microwave not heating to narrow down likely causes

Last updated: February 2026

Kenmore microwave/hood combo model 72180513600 measures 29.75 inches wide, 16.25 inches high, and 16 inches deep (overall exterior size). For the exact mounting, venting, and cabinet drilling template dimensions, use the 72180513600 installation guide.

Overall size is only part of the fit. For an over-the-range microwave, we also recommend confirming:

• Upper cabinet bolt locations (top mounting bolts)
• Power cord hole location in the upper cabinet
• Rear wall mounting plate position and hole pattern
• Venting configuration (recirculating, roof vent, or rear wall vent)
• Clearance above the cooktop and door swing clearance

If you are double-checking your space, measure these points with a tape measure:

• Cabinet opening width between the side cabinets
• Depth available from the wall to the cabinet face frame
• Distance from cooktop to cabinet bottom (for comfortable clearance)

Correct dimensions help prevent cabinet interference, ensure the mounting plate and top bolts line up, and avoid venting misalignment during installation.

Last updated: February 2026