Kenmore 58715233900A dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 58715233900A. The key is matching parts to your exact model number so items like the pump, water inlet valve, drain hose, and door seal fit and seal correctly.

How to make sure you order the right part

Use your model number (58715233900A) and confirm the part by name and ID. Your serial/model label is typically on the right side of the tub, and the parts list in the 58715233900A owner's manual helps you identify what you have.

• Match the full model number exactly: 58715233900A
• Compare the part name and part ID (not just a photo)
• Check symptoms first (leak, no drain, no fill, poor wash)
• Replace seals and gaskets when you disturb a water connection
• After installing, run a short cycle and inspect for leaks

Common Kenmore dishwasher parts customers replace

These are frequent repairs on this model family; all are examples of parts we list for 58715233900A:

Symptom	Likely part category	Example part for this model
Not draining or drains slowly	Drain path	Drain hose 807117001
Not filling or fills too slowly	Water supply	Dishwasher water inlet valve 154637401
Leaking at the door	Door sealing	Dishwasher door seal 809006501
Poor washing, weak spray	Wash circulation	Pump A00126401

Why it matters

Dishwashers are sensitive to fit and sealing. Using the correct Kenmore 58715233900A part helps prevent leaks, improves cleaning performance, and avoids repeat repairs caused by mismatched hoses, gaskets, or electrical components.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 58715233900A is usually worth it when the unit is under about 10 years old and the problem is a common wear item (leaks, draining issues, poor cleaning). If the repair involves major electrical or motor components, compare the repair total to replacement cost.

Quick way to decide (cost vs. age)

Use this simple rule of thumb: if the repair is under 50% of the price of a comparable new dishwasher, repair is typically the better value.

• Under ~10 years old: repairs are commonly cost-effective
• Over ~10 years old: prioritize low-cost fixes (seals, hoses) first
• Multiple symptoms at once (leak + no drain + no heat): expect higher total cost
• If it is leaking, fix quickly to prevent cabinet and floor damage
• If it is not cleaning well, check loading and water temperature before replacing parts

Common repairs that are often worth it on 58715233900A

These are frequent, targeted fixes that can restore performance without replacing the whole dishwasher:

• Leaks at the door: replace the dishwasher door seal 809006501
• Not draining or slow drain: inspect/replace the drain hose 807117001
• Not filling or weak fill: test/replace the dishwasher water inlet valve 154637401
• Poor wash action: check for clogs; pump issues may point to the pump A00126401
• Not drying: heating circuit problems may involve the dishwasher heating element 154665201

Repair impact comparison

Symptom	Typical cause	Usually worth repairing?
Water on floor at door	Worn door seal	Yes
Standing water in tub	Drain restriction or hose issue	Yes
Dishes gritty or dirty	Loading, spray arm blockage, filter area	Yes
No heat, poor drying	Heating element or related circuit	Often
Dead controls or erratic operation	Control or wiring issue	Depends on total cost

Why it matters

This dishwasher is designed to recirculate filtered wash water for cleaning performance; when basics like water fill, draining, and sealing are corrected, you often get a big improvement without replacing the appliance. For model-specific operating and care steps, use the 58715233900A owner’s manual.

Last updated: February 2026

Your Kenmore dishwasher’s model number is printed on the model and serial number label. On model 58715233900A, that label is located in the spot shown in the Dishwasher Features section of the 58715233900A owner's manual.

Where to look on the dishwasher

We use the model and serial number label to identify the exact version of your dishwasher for parts and troubleshooting. Check these common locations first:

• Along the inner edge of the door (visible when the door is open)
• On the tub frame near the door latch area
• On the left or right side wall of the tub opening
• Near the bottom edge of the door or tub opening

What to write down (and why)

Record the full model number and serial number exactly as shown on the label. This helps ensure the correct diagrams, parts, and instructions match your unit.

• Model number (example format in the manual: 587.1523*; your full model is 58715233900A)
• Serial number
• Purchase date (if available)

Quick label-reading tips

Dishwasher labels can be hard to read after years of heat and moisture. These steps make it easier:

• Use a flashlight and look at an angle to reduce glare
• Wipe the label gently with a damp cloth (do not scrub)
• Take a close-up photo and zoom in
• Copy letters and numbers carefully; do not assume similar characters match

Model number vs. serial number

Item	What it tells us	Used for
Model number	The exact dishwasher design and parts fit	Ordering parts, diagrams, manuals
Serial number	Production run details	Service history, some part revisions

Why it matters

Kenmore dishwashers often share similar styling across multiple 587-series models; the full model number is what guarantees the right match for parts like a door seal, drain hose, or control board.

Last updated: March 2026