Craftsman 917385351 lawn mower Parts

Common problems we see on the Craftsman 917385351 walk-behind mower include hard starting (often from over-priming or a dirty air filter), loss of power from grass buildup under the deck, uneven cutting from a worn or loose blade, and excessive vibration from a damaged blade or bent crankshaft. See the 917385351 owner's manual troubleshooting chart for symptom-by-symptom checks.

• Won’t start or starts then dies: over-priming (flooding), stale fuel, dirty air filter, spark plug issues
• Loss of power: cutting too much grass at once, grass and debris packed under the mower housing, walking speed too fast
• Poor cut or uneven cut: worn or bent blade, wheel heights set unevenly, debris under the deck
• Excessive vibration: loose or bent blade, damaged blade adapter, bent engine crankshaft
• Starter rope hard to pull: blade dragging in grass, brake engaged when the control bar is released, broken blade adapter

1. Shut the engine off, disconnect the spark plug wire, and wait for all moving parts to stop.
2. Tip the mower only as directed in the 917385351 owner's manual (to reduce fuel or oil leakage).
3. Clear packed grass from under the deck; buildup is a top cause of power loss and uneven cutting.
4. Inspect the blade and blade mounting hardware for looseness or damage.
5. If the rope is hard to pull, check for a jammed blade area or a damaged adapter before forcing it.

If inspection shows damage or wear, these model-matched parts are common fixes:

Running with a bent blade or damaged blade adapter can cause strong vibration, which accelerates wear on the engine shaft area and can turn a simple blade service into a bigger repair. Keeping the underside of the deck clean also prevents repeated power loss and clumping.

Last updated: February 2026

The model number for this Craftsman walk-behind mower is 917.385351 (often written without the dot as 917385351). You can confirm it on the model/serial decal on the rear of the mower housing and in the 917385351 owner's manual.

Look for the identification decal in this common location:

• Rear of the lawn mower housing (back of the deck)
• Near the height adjuster area on the deck (common placement)
• On a label that also lists the serial number
• Best viewed after brushing off grass and dirt buildup

Craftsman model numbers are typically printed in a few formats. For this mower, all of these point to the same model:

We use the exact model number to match the correct diagrams and parts for your mower, especially for fit-critical items like the blade, blade adapter, and control cable.

If you are ordering common wear items for this model, these part pages are examples of model-matched components:

• Lawn mower blade 532406713 (22-inch blade)
• Blade adapter 532418373 (connects blade to crankshaft)
• Lawn mower engine zone control cable 582991501 (operator presence control cable)

Last updated: February 2026

A Craftsman walk-behind mower like model 917385351 typically lasts 8 to 12 years with normal residential use and routine maintenance (oil changes, blade care, and clean fuel). Consistent upkeep and correct storage are what most directly determine whether it reaches the high end of that range.

• Engine maintenance: regular oil changes and clean air filtration reduce wear on the Briggs & Stratton 4-cycle engine.
• Blade condition: a bent or dull blade increases vibration and can damage the blade adapter and crankshaft.
• Fuel quality and storage: old fuel and ethanol-related varnish shorten carburetor life.
• Deck care: keeping the 22-inch deck clean helps prevent rust and improves airflow.
• Operating habits: mowing wet, overgrown grass strains the engine and drive components.

Use the schedule and specs in the owner's manual and follow these practical checkpoints:

• Change engine oil at the recommended intervals; use the specified oil type.
• Sharpen or replace the blade when it nicks, bends, or leaves ragged cuts.
• Inspect the blade mounting stack for looseness after impacts.
• Clean grass buildup from under the deck after mowing (with the spark plug wire disconnected).
• Drain or stabilize fuel before off-season storage.

If you need a replacement blade for this model, match it to the correct part listing such as the lawn mower blade 532406713.

A mower that is maintained to spec cuts cleaner, runs cooler, and avoids vibration-related damage; those are the biggest factors that turn a “few seasons” mower into a decade-plus mower.

Last updated: March 2026