Frigidaire FEF365CGSD electric range Parts

Yes. Looking up parts by model number is the most accurate way to get compatible replacement parts for your Frigidaire electric range model FEF365CGSD, because the model number ties directly to the correct diagrams, part lists, and revisions shown in the FEF365CGSD owner's manual.

How to find the model number on the range

For FEF365CGSD, the model and serial information is typically on the oven front frame area. Check these common spots:

• On the oven front frame behind the storage drawer or lower panel
• On the oven front frame near the door opening
• On a serial plate on the front frame or floor shield area
• In the literature pack that came with the range (if you still have it)

How to use the model number to choose the right part

Once you have FEF365CGSD exactly as printed, match it to the part category you need (bake, broil, cooktop, lights, controls). Then confirm the part by name and ID.

Here are examples of model-matched parts commonly replaced on this range:

What’s not working	Part to check first	Example part ID on this model
Oven not heating in bake	Bake element	Range bake element 316075103
Oven light out	Oven light bulb	Range oven light bulb 316538904
Burner won’t regulate heat	Surface element control switch	Range surface element control switch 316436001

Why it matters

Frigidaire ranges often have multiple versions that look similar but use different wiring, switches, or elements. Using the exact model number helps prevent ordering a part that does not fit, does not mount correctly, or has the wrong electrical rating.

Quick tips before you order

• Copy the model number exactly (letters and numbers matter)
• Compare the part name and part ID, not just a photo
• If you’re replacing a heating or electrical part, disconnect power before servicing
• Use the troubleshooting steps in the manual first to avoid replacing good parts

Last updated: February 2026

To reset your Frigidaire FEF365CGSD electric range, turn off power at the breaker (or unplug the cord) for about 30 seconds, then restore power and reset the clock. This clears many control glitches after a power interruption or a control lockup.

Safe reset steps (recommended)

• Turn all surface burner knobs to OFF.
• Switch the range circuit OFF at the home breaker (preferred) or unplug the range.
• Wait 30 seconds.
• Restore power.
• Set the clock and reselect any oven function settings (as needed); see the FEF365CGSD owner's manual.

If the oven or burners still do not heat

A “reset” will not fix a missing power leg or wiring problem. Electric ranges need the correct 240V supply; if one leg is lost, you can see symptoms like the oven not heating or multiple surface elements not working.

• Check whether any surface element heats normally.
• If none of the burners heat after installation, check the terminal block and power cord connections.
• If the oven will not bake but broil works (or vice versa), a failed heating element is likely.
• If an error code appears, use the Frigidaire self-cleaning range error codes guide to match the code to the next step.

Quick symptom guide

What you notice	Most likely cause	What to do next
Display works, but oven will not heat	Failed bake element or control issue	Inspect/replace the Frigidaire range bake element 316075103 if it is damaged; then retest
Several burners not heating	Power supply or terminal block issue	Verify breaker, cord, and connections; inspect the terminal block
Error code on display	Sensor, latch, or control fault	Look up the code and follow the recommended checks

Why it matters

Resetting power is the fastest way to clear a temporary electronic fault, but heating problems often trace back to power supply, wiring at the terminal block, or a failed bake element. Correct diagnosis prevents repeat shutdowns and protects the range’s wiring.

Last updated: February 2026

An electric oven in a Frigidaire FEF365CGSD range is built around heating elements (bake and broil), temperature sensing and controls, and basic cavity hardware like racks, the door, and the oven light. These parts work together to create and regulate heat for baking and broiling.

Core electric oven parts (what they do)

• Bake element: bottom heat source for most baking and roasting (example: range bake element 316075103).
• Broil element: top heat source for broiling and browning (example: range broil element 5303051140).
• Temperature sensor (probe): tells the control how hot the oven is so it can cycle heat accurately (example: temperature probe 5304497424).
• Oven control and switches: manage bake/broil functions, timing, and some safety logic.
• Oven racks and rack supports: position food for proper airflow and browning.
• Oven door assembly: glass, hinges, and handle help retain heat and allow viewing.
• Oven light system: bulb, lens/cover, and socket illuminate the cavity (examples: range oven light bulb 316538904, range light socket 316116400, cover 5304524341).
• Door seal (gasket): helps keep heat inside the oven cavity (example: range oven door seal 5303131601).

Quick part-to-symptom guide

Symptom	Most likely area	Common next step
Oven will not heat in bake	Bake element, control, wiring	Inspect element for damage; test element continuity
Broil does not work	Broil element, control	Check broil element and connections
Oven temperature is off	Temperature sensor/probe	Check sensor resistance and mounting
Oven light out	Bulb, socket, lens/cover	Replace bulb; inspect socket for heat damage
Heat leaking, long preheat	Door seal, door alignment	Inspect gasket for gaps or tears

Why it matters

Knowing the main oven parts helps you troubleshoot faster and order the right Frigidaire range parts the first time. For example, a weak bake element can cause uneven baking, while a failing temperature probe can make the oven run too hot or too cool.

Where to confirm locations and service steps

We recommend using the FEF365CGSD owner’s manual to confirm part locations (like the rear oven light cover and wire holder) and follow safe steps such as turning power off before servicing.

Last updated: February 2026

On your Frigidaire FEF365CGSD electric range, we use the model and serial number from the appliance ID plate to look up the correct replacement part numbers. For this model, the serial plate is typically on the oven front frame (often behind the lower panel or on the floor shield); check the FEF365CGSD owner's manual for the exact ID plate locations.

What to look for on the label

Use the information exactly as printed so we can match the right diagrams and parts list.

• Model number (example: FEF365CGSD)
• Serial number (unique to your range)
• Date of purchase (helpful for service history)
• Sometimes a series or production code

Common ID plate locations on this range

Based on the owner’s guide for this Frigidaire range style, the ID plate is commonly found in these areas:

• Right side of the oven front frame (most common)
• Behind the lower front panel (kick panel area)
• On the floor shield near the front frame

Quick access checklist

1. Turn the range off and let it cool.
2. Open the oven door and inspect the front frame edges.
3. If you do not see the plate, check behind the lower panel.
4. Write the model and serial numbers down exactly.

How the model/serial number helps us get the right part

Many Frigidaire ranges share similar-looking parts, but wiring, element wattage, and mounting details can vary by production run. Using the model/serial number helps ensure you get the correct items, such as a Frigidaire range bake element 316075103 or a control switch that matches your cooktop configuration.

What you have	What it’s used for	Why it matters
Model number	Finds the correct parts diagrams	Prevents ordering the wrong fit
Serial number	Identifies production run details	Helps match revisions/updates
Part number	Identifies the exact replacement part	Ensures compatibility

Why it matters

Ordering by appearance alone is the top reason range parts get returned. The ID plate information lets us match your Frigidaire FEF365CGSD to the correct replacement parts the first time.

Last updated: February 2026