Whirlpool WRSC5536RW00 side-by-side refrigerator Parts

To estimate the cubic feet of your Whirlpool WRSC5536RW00 side-by-side refrigerator, measure the usable interior space (not the outside cabinet), multiply width × height × depth in inches to get cubic inches, then divide by 1,728 to convert to cubic feet.

How to measure and calculate cubic feet

1. Empty the section you are measuring (fresh food and freezer are often calculated separately).
2. Measure the interior:
   • Width (left to right)
   • Height (top to bottom)
   • Depth (front to back, stopping at the back wall, not the door bins)
3. Multiply the three numbers to get cubic inches.
4. Divide by 1,728 (12 × 12 × 12) to get cubic feet.

Example calculation

• Interior size: 24 in (W) × 70 in (H) × 24 in (D)
• Cubic inches: 24 × 70 × 24 = 40,320
• Cubic feet: 40,320 ÷ 1,728 ≈ 23.3 cu ft

Tips to get a more realistic “usable space” number

• Measure shelf-to-shelf space if you want a practical storage estimate.
• Exclude areas taken up by:
  • Ice maker housing and air ducts
  • Light covers and control housings
  • Fixed dividers and bins you cannot remove
• If your ice maker takes up noticeable room in the freezer, factor that in when estimating; the assembly, ice maker W10873791 occupies space and can reduce usable freezer volume.

Quick reference table

What you measure	What it tells you	Best for
Interior width × height × depth	Approximate total volume	Comparing fridge sizes
Shelf-to-shelf and bin space	Practical usable storage	Planning groceries and containers
Fresh food + freezer separately	More accurate total estimate	Side-by-side layouts

Why it matters

Cubic feet is a volume estimate that helps you compare refrigerator capacity, but day-to-day storage depends more on shelf layout, ice maker space, and door bin design than the raw number.

Last updated: February 2026

The most common Whirlpool refrigerator problem is poor cooling caused by an evaporator air-circulation issue. When airflow across the evaporator is weak, your WRSC5536RW00 can develop warm fresh-food temps, soft ice, and uneven temperatures even though the compressor seems to run.

What you will usually notice first

• Refrigerator section warms up while the freezer is closer to normal
• Frost buildup on the back wall of the freezer
• Noisy fan sound, or no fan sound when the doors are closed
• Ice maker slows down or stops producing
• Food freezes in some spots and spoils in others

Quick checks we recommend (before replacing parts)

1. Confirm airflow is not blocked: avoid packing items tight against vents.
2. Check for heavy frost: a frosted-over evaporator cover often points to a defrost or airflow problem.
3. Listen for the evaporator fan: it typically runs when the compressor is running (door switch may need to be closed to test).
4. Inspect the door switch: if the switch is stuck “open,” the fan may not run as expected.
5. Verify the doors seal and close: air leaks create frost and temperature swings.

Parts that commonly relate to airflow and cooling symptoms

If your symptoms match, these model-compatible parts are common suspects:

Symptom	What it often points to	Example part for this model
Warm refrigerator, freezer OK	Weak/no evaporator airflow	Refrigerator evaporator fan blade WP2169142
Fan seems to stop when door closes or light behavior is odd	Door switch issue	Refrigerator door switch W11396033
Compressor struggles to start, clicking, intermittent cooling	Start component problem	Refrigerator capacitor WPW10662129

Why it matters

A side-by-side refrigerator depends on steady evaporator airflow to move cold air into both compartments. When airflow drops, temperatures drift, frost builds faster, and the compressor can run longer than it should.

Helpful DIY guidance

• Use our how to fix your evaporator cooling fan walkthrough to diagnose airflow problems step by step.
• If your refrigerator displays a fault code, our Whirlpool refrigerator error codes guide helps narrow the cause.

Last updated: February 2026

A Whirlpool refrigerator typically lasts 10 to 15 years. For your Whirlpool WRSC5536RW00 side-by-side refrigerator, keeping temperatures stable, cleaning condenser areas, and fixing air leaks quickly helps you reach the high end of that range.

Typical lifespan and what changes it

Most refrigerators fail early due to heat stress on the compressor, restricted airflow, or moisture and ice buildup. These factors have the biggest impact on service life:

• Condenser cleanliness (dust and pet hair raise operating temperatures)
• Door seal condition (warm air leaks force longer run times)
• Ice maker and dispenser health (clogs and leaks add wear and water damage risk)
• Fan airflow (poor circulation causes warm spots and longer cycles)
• Power quality (surges and repeated outages stress electronics)

Quick care checklist (high impact)

Use these habits to extend life and reduce repairs:

• Keep fresh food at 37°F to 40°F and freezer at 0°F
• Clean the condenser area every 6 to 12 months
• Make sure doors close fully; avoid overloading door bins
• Replace the water filter on schedule; flush water after changes
• Address unusual noises quickly (rattling, buzzing, or clicking)

Parts that commonly affect longevity

If you are seeing symptoms, these model-compatible parts are common fixes:

Symptom	Often involved	Example part on this model page
No ice or small cubes	Ice maker issues	Assembly, ice maker W10873791
Lights off or dispenser acts odd when door opens/closes	Door switch	Refrigerator door switch W11396033
Warm temps, weak airflow, or fan noise	Evaporator fan area	Refrigerator evaporator fan blade WP2169142
Door not sealing, moisture, frost	Door gasket wear	(Match gasket by location and color from the parts list)

Why it matters

A refrigerator that runs hotter or longer than normal uses more electricity and puts extra load on the sealed system (compressor and refrigerant circuit). Fixing airflow and sealing problems early is the simplest way to protect long-term reliability.

For troubleshooting steps tied to Whirlpool symptoms and display alerts, use our Whirlpool refrigerator error codes.

Last updated: February 2026