Craftsman 917376532 lawn mower Parts

The model number for this Craftsman walk-behind lawn mower is 917.376532 (often written without the dot as 917376532). You can confirm it on the model plate and in the 917376532 owner's manual.

Where to find the model number on the mower

Check these common locations on Craftsman walk-behind mowers like model 917376532:

• On a label or stamped plate on the rear of the deck (near the discharge opening)
• On the deck housing near the engine mounting area
• Near the handle mounting brackets
• In the manual cover and parts list

Why you might see it written two ways

Both formats refer to the same mower; the dot is just a formatting style.

How it may appear	What it means
917.376532	Full model number with dot formatting
917376532	Same model number without the dot

Tips for using the model number when ordering parts

Using the exact model number helps us match the correct blade, drive parts, and hardware for your mower.

• Match all digits (including any dot formatting) to avoid wrong-fit parts
• Use the model number when looking up diagrams for the drive system and deck
• If your mower has electric start, use the model number to match battery and charger parts
• Keep the model number handy before replacing wear items like the husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825

Why it matters

Craftsman mowers can look similar across years and engine series, but small changes in the deck, drive control, and wheel assemblies can require different parts. Confirming 917.376532 prevents ordering the wrong replacement.

Last updated: January 2026

For a Craftsman lawn mower model 917376532, it’s usually cheaper to repair when the problem is a normal wear item (blade, belt, spark plug, air filter), but it’s usually smarter to replace when the repair involves major drivetrain or engine work and the estimate is close to half the cost of a comparable new mower. Use the 917376532 owner's manual to confirm what maintenance and adjustments are expected versus what requires service.

Quick rule of thumb we use

• Repair if the fix is routine maintenance or a single, accessible part
• Replace if multiple major systems are failing (engine performance plus self-propel drive plus deck damage)
• Replace if the mower has repeated no-start issues after a proper tune-up
• Repair if the mower is otherwise solid and you can restore safe operation with a few parts

Typical repair costs vs replacement decision

These ranges are typical for walk-behind mowers like the 917376532 (labor rates vary by area).

Issue type	Common examples	Typical direction
Wear items	blade, belt, cable, wheels	Repair
Drive system	self-propel slipping, won’t move	Repair first; replace if transmission is the culprit
Engine-related	hard starting, surging, low power	Repair if tune-up fixes it; replace if major internal work is needed
Structural/safety	cracked deck, unsafe controls	Replace

Model-specific clues from the manual that affect cost

The manual for this mower calls out several items as normal maintenance or wear, which usually makes repair the better value:

• Blades, belts, air cleaners, and spark plugs are treated as expendable wear items
• Routine upkeep includes checking oil, changing oil, cleaning/replacing the air filter, and replacing the spark plug at least yearly
• If the mower won’t self-propel, the troubleshooting guidance points to checking the drive belt and drive control/cable

If your mower is not moving, we typically start with the lawn mower wont move troubleshooting video motion drive failure and then inspect the belt and drive components.

Parts that often make repair economical

• Husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825 if the cut is ragged or the blade is bent
• Lawn mower ground drive belt 532196853 if self-propel slips or stops under load
• Lawn mower control cable assembly 587326605 if the control doesn’t engage consistently

Why it matters

A mower that’s out of adjustment or running with a dull/bent blade can cut poorly, strain the engine, and accelerate wear. Fixing the right wear item early often prevents a much bigger repair later.

Last updated: January 2026

For Craftsman walk-behind mower model 917376532, the serial number is the key to the build date. We use the serial number from the decal on the rear of the mower housing to identify the manufacturing date, including the year; the exact format is shown in the 917376532 owner's manual.

Where to find the serial number on model 917376532

Look for a decal on the rear of the lawn mower housing. Record the serial number and your purchase date for future parts lookups and service.

• Tip the mower only as directed in the manual (to avoid fuel or oil spills)
• Wipe grass and dirt off the rear housing so the decal is readable
• Write down the full serial number exactly as printed
• Take a photo of the decal for a backup

How to decode the year from the serial number

Many Craftsman mower serial numbers use a date-coded pattern where groups of digits represent the month, day, and year. Once you have the full serial number, match its format to the examples and decoding notes in the manual.

Quick decode checklist

• Identify whether the serial begins with a date block (often 6 digits)
• Split the date block into MM / DD / YY when that pattern matches your serial
• Convert YY to a four-digit year (example: 11 = 2011)
• If your serial uses letters or a different grouping, follow the manual’s format notes

Example (how the date block works)

Serial date block	Interprets as	Build date
072811	MM/DD/YY	July 28, 2011
031520	MM/DD/YY	March 15, 2020

Why it matters

The build year helps us match the correct parts and configurations for your Craftsman mower, especially for wear items like the blade, drive belt, and control cable.

Last updated: January 2026