What is the average lifespan of a Frigidaire refrigerator?
A Frigidaire refrigerator typically lasts 10 to 15 years. For your Frigidaire FRSS2623AW6 side-by-side refrigerator, consistent upkeep (good airflow, clean coils, and timely filter changes) helps you reach the high end of that range.
What affects refrigerator lifespan most
- Condenser cleanliness and airflow: Dust-clogged coils make the compressor run hotter and longer.
- Door seal condition: Leaky gaskets force longer run times and create moisture and frost issues.
- Water and ice system maintenance: Regular filter changes reduce restrictions and nuisance problems.
- Temperature settings and loading: Overpacking blocks vents; warm settings increase food spoilage risk.
- Power quality and outages: Frequent interruptions can stress control boards and compressors.
Maintenance checklist we recommend for FRSS2623AW6
- Vacuum and brush the condenser area every 6 to 12 months.
- Keep doors closing squarely; clean gasket surfaces and check for gaps.
- Replace the water filter on schedule; use the correct filter for this model such as the Frigidaire refrigerator water filter FPPWFU01.
- Confirm the freezer is holding about 0°F and the fresh food section about 37°F.
- If you see water under the unit or inside the refrigerator, inspect the drain path and consider replacing a damaged drain component such as the electrolux refrigerator drain tube 241830905.
Common “wear” items vs. long-life components
| Item type | Examples on this model | Typical replacement frequency |
|---|---|---|
| Routine maintenance parts | Water filter | Every 6 months (typical) |
| Sealing parts | Door gaskets | As needed when torn, warped, or leaking |
| Cooling system parts | Evaporator fan motor, sensors | As needed when symptoms appear |
Why it matters
Most refrigerators do not fail all at once; they lose efficiency first. Keeping seals tight, airflow clear, and filters fresh reduces run time, helps stabilize temperatures, and can extend the useful life of your FRSS2623AW6.
Ordering the right parts
We list model-matched replacement parts for FRSS2623AW6 on this page; you can also search by model number on Sears PartsDirect if you are building a larger parts list.
Last updated: February 2026
How to read a Frigidaire refrigerator model number?
To read a Frigidaire refrigerator model number, we use the full string exactly as it appears on the appliance rating label (letters and numbers in order). For your side-by-side refrigerator, the model number is FRSS2623AW6; matching that exact model number ensures you get the right parts and diagrams.
Where to find the model number on FRSS2623AW6
On most Frigidaire side-by-side refrigerators, the rating label is inside the fresh food (refrigerator) compartment, typically on a side wall near the front. Check these common spots:
- Left interior wall of the refrigerator section
- Right interior wall of the refrigerator section
- Near the crisper drawers (side wall area)
- Along the door opening frame (face frame) in the refrigerator section
How to “read” the model number (what each part tells you)
Frigidaire model numbers are a code. You do not need to decode it to buy parts, but understanding the structure helps you avoid mix-ups.
| Example from your model | What it generally indicates | Why you care |
|---|---|---|
| FRSS | Product family/series (side-by-side line) | Helps separate similar-looking refrigerators |
| 2623 | Size/feature group identifier | Helps distinguish capacity and options |
| AW6 | Version, finish, or engineering revision | Critical for exact-fit parts |
Tips to avoid ordering the wrong part
When you look up parts for FRSS2623AW6, we recommend these checks:
- Copy the model number exactly, including the last characters (for example, AW6).
- If the label also lists a serial number, keep it for reference, but use the model number for parts lookup.
- If you are replacing a water filter, match the filter type to the model; for this model, a common replacement is the Frigidaire refrigerator water filter FPPWFU01.
- If you are fixing a warm refrigerator or temperature swings, confirm the model before ordering sensors such as the refrigerator temperature sensor 5303918775.
Why it matters
Small model-number differences can change door gaskets, electronic controls, and even the correct water filter. Using the exact FRSS2623AW6 model number helps ensure the part fits, seals correctly, and restores proper cooling.
If you need to search beyond the parts list for this model, we also support model-number search on Sears PartsDirect.
Last updated: February 2026
What is the most common problem with a Frigidaire refrigerator?
The most common problem we see on Frigidaire refrigerators like model FRSS2623AW6 is a cooling complaint, often “freezer is cold but fresh food is warm.” This typically traces to airflow or heat removal issues such as an evaporator fan problem, dirty condenser coils, or a defrost system issue that lets frost block airflow.
Most common symptoms customers report
- Freezer temperature seems normal, but refrigerator section warms up
- Weak airflow from the refrigerator vents
- Frost or ice buildup on the freezer back wall (airflow restriction)
- Louder-than-normal fan noise or intermittent fan operation
- Ice maker or water dispenser performance problems (slow fill, no ice)
What to check first (fast, high-impact steps)
- Confirm airflow: Make sure vents inside the refrigerator section are not blocked by food packages.
- Clean heat removal surfaces: Dust on the condenser area can reduce cooling efficiency.
- Listen for the evaporator fan: If you do not hear a steady fan when the unit is running, the fan motor or blade can be the cause.
- Look for frost buildup: Heavy frost points to a defrost heater or sensor issue.
- Check door sealing: A leaking gasket pulls in warm, moist air and drives frost and temperature swings.
Parts that commonly solve “warm fridge, cold freezer” on FRSS2623AW6
If troubleshooting points to a failed component, these model-matched parts are common fixes:
| Problem area | What fails | Example model-matched part on this page |
|---|---|---|
| Airflow in freezer to fridge | Fan motor or blade | Refrigerator evaporator fan motor 5304532557, refrigerator evaporator fan blade 5308000010 |
| Defrost system | Heater not melting frost | Refrigerator defrost heater 5304526032 |
| Temperature sensing | Sensor (thermistor) out of range | Refrigerator temperature sensor 5303918775 |
| Warm air leaks | Door gasket not sealing | Refrigerator freezer door gasket 241786014 |
Why it matters
A side-by-side refrigerator depends on steady airflow from the freezer evaporator to cool the fresh food section. When airflow is reduced (fan issue, frost blockage, or a door seal leak), temperatures rise quickly in the refrigerator compartment even if the freezer still feels cold.
Helpful DIY guidance
- Use our how to fix your evaporator cooling fan walkthrough to diagnose fan noise, no-fan conditions, and airflow problems.
- If your display shows a fault, our Frigidaire refrigerator error codes reference helps you narrow the failure to a sensor, fan, or control issue.
You can order FRSS2623AW6 replacement parts from the parts list for this model, or search by model number on Sears PartsDirect.
Last updated: February 2026
Is FRSS2623AW6 garage ready?
We treat the Frigidaire FRSS2623AW6 as not garage-ready by default unless the unit is specifically rated for safe operation across typical garage temperature swings. For reliable cooling and ice production, keep it in a climate-controlled space or confirm the approved ambient temperature range before installing it in a garage.
What “garage ready” means (and why it matters)
A garage-ready refrigerator is designed to maintain proper refrigerator and freezer temperatures when the surrounding air gets unusually cold or hot. In a garage, wide temperature swings can cause:
- Warm refrigerator temps (food safety risk)
- Soft ice or no ice production
- Longer run times and higher energy use
- Frost buildup or defrost performance issues
- Compressor stress and premature wear
Practical guidance for using FRSS2623AW6 in a garage
If you plan to place FRSS2623AW6 in a garage, we recommend these steps to reduce problems:
- Keep the garage as temperature-stable as possible (avoid direct sun and uninsulated exterior walls).
- Leave proper airflow clearance around the cabinet so the condenser can reject heat.
- Set the refrigerator to 37°F and the freezer to 0°F, then monitor with thermometers for 24 to 48 hours.
- If temps drift, move the refrigerator indoors rather than chasing settings.
- If cooling is weak or inconsistent, check airflow and fan operation; the evaporator fan is a common contributor.
Parts that commonly relate to garage-temperature symptoms
Garage conditions often expose weak airflow, sensing, or defrost performance. These parts are commonly involved in temperature complaints on side-by-side refrigerators:
| Symptom in garage | Common system involved | Example part on this model page |
|---|---|---|
| Fridge warm, freezer OK | Evaporator airflow | Refrigerator evaporator fan motor 5304532557 |
| Temps swing up and down | Temperature sensing | Refrigerator temperature sensor 5303918775 |
| Frost buildup, airflow drops | Defrost system | Refrigerator defrost heater 5304526032 |
| Moisture or leaks after defrost | Drain path | Electrolux refrigerator drain tube 241830905 |
Ordering parts for FRSS2623AW6
We list model-matched replacement parts for FRSS2623AW6 on this page, and you can also search by model number on Sears PartsDirect if you are building a full repair list.
Why this matters
A refrigerator that is not truly garage-rated can look “fine” for a while, then struggle when the seasons change. Confirming the environment first helps prevent food spoilage, nuisance icing, and avoidable part replacements.
Last updated: February 2026





