Frigidaire FRSS2623AW0 refrigerator Parts

We treat the Frigidaire FRSS2623AW0 as a standard side-by-side refrigerator for installation planning; the provided FRSS2623AW0 owner's manual and FRSS2623AW0 installation guide focus on normal home installation requirements (clearances, airflow, and water supply) rather than confirming a specific “garage ready” temperature rating.

A “garage ready” refrigerator is designed to run correctly across a wider range of ambient temperatures than a typical kitchen install. Before placing FRSS2623AW0 in a garage, we recommend verifying these items:

• Minimum and maximum ambient temperature the unit is rated for
• Whether the freezer and fresh food sections maintain safe temps in cold weather
• Whether the ice maker and water system are approved for the location
• Required airflow and toe grille clearance (do not block the toe grille)
• A dedicated, properly grounded outlet and stable power

The installation guidance for this model emphasizes basics that become even more important in a garage environment:

• Keep sufficient air circulation around the refrigerator for proper operation.
• Avoid shifting the unit side to side to prevent floor damage.
• If you connect water, use proper materials and follow local plumbing codes.

Garages often swing hotter and colder than kitchens. Those temperature swings can affect compressor run time, freezer performance, and ice maker operation, even when the refrigerator is installed correctly.

Last updated: February 2026

Yes. The Frigidaire FRSS2623AW0 is worth the cost when you want a straightforward, budget-friendly side-by-side with dependable everyday cooling plus built-in ice and water dispensing; it focuses on core performance over premium extras. For feature details and operating expectations, use the FRSS2623AW0 owner's manual.

Most owners choose this style for convenience and predictable performance. Typical value points include:

• Side-by-side layout that keeps both fresh food and frozen items at eye level
• Automatic ice and water dispenser convenience
• Standard, easy-to-service design with widely available maintenance parts
• Normal operating sounds are expected during cooling and ice making (fans, water fill, compressor cycling)
• Routine upkeep (filters, door seals) helps protect performance and efficiency

A refrigerator can feel “expensive” later if maintenance is ignored. Plan for these common items:

• Water filter replacements (model uses a cartridge-style filter such as Frigidaire refrigerator water filter FPPWFU01)
• Door gasket condition (air leaks raise run time and can cause moisture)
• Occasional light bulb replacement (if applicable)
• Keeping condenser area clean and allowing airflow around the cabinet

For filter selection and replacement steps, follow how to replace the water filter in a Frigidaire refrigerator.

“Worth it” comes down to total cost of ownership. When the water system is maintained and the doors seal tightly, a side-by-side like the FRSS2623AW0 delivers consistent temperatures, better food preservation, and fewer dispenser issues over time.

Last updated: February 2026

Yes. Looking up parts by model number is the most accurate way to get compatible replacement parts for your Frigidaire FRSS2623AW0 side-by-side refrigerator because it filters results to the exact configuration (doors, dispenser, ice maker, controls) used on that model. Use the full model number from the data tag and match the part description carefully.

On FRSS2623AW0, the model/serial information is on the refrigerator’s data tag. Once you have it, use the complete model number (including any trailing digits) when searching parts.

• Write the model number exactly as shown: FRSS2623AW0
• Also record the serial number (helpful for production changes)
• Use the parts diagram sections to confirm location and appearance
• Cross-check the part name and identifier before ordering
• Keep the info with your paperwork for future repairs (filters, gaskets, sensors)

For model-specific identification and feature layout, use the FRSS2623AW0 owner’s manual.

These are frequent wear or maintenance items on side-by-side refrigerators:

• Water filter
• Door gasket
• Evaporator fan motor or blade
• Temperature sensor (thermistor)
• Light bulb

If you are replacing the water filter, the model’s listed filter option is Frigidaire refrigerator water filter FPPWFU01. For step-by-step filter selection and replacement guidance, use how to replace the water filter in a Frigidaire refrigerator.

Frigidaire often uses similar-looking parts across multiple refrigerator families, but small differences (connector style, gasket color, filter type, control revisions) can affect fit and performance. Searching by FRSS2623AW0 helps prevent returns and repeat repairs.

Last updated: February 2026

Yes. We sell replacement parts for Frigidaire refrigerators, including model FRSS2623AW0, so you can repair common issues like water leaks, poor cooling, noisy operation, or dispenser problems without replacing the whole appliance. Use your model number to match the correct parts and diagrams.

• Confirm the full model number on the rating label (match FRSS2623AW0 exactly).
• Use the parts diagrams to identify the exact location and name of the failed part.
• Match by part ID and description, not just by appearance.
• Check whether the part is for the refrigerator side or freezer side.
• Review the procedure and safety notes in the FRSS2623AW0 owner's manual.

Here are a few examples of FRSS2623AW0 parts we commonly see replaced:

Using the correct FRSS2623AW0 replacement part helps restore proper temperatures, protects the compressor from overwork, and prevents repeat failures caused by poor fit or incorrect electrical connectors.

• For filter selection and replacement steps, use how to replace the water filter in a Frigidaire refrigerator.
• If you’re troubleshooting a display or fault code, use Frigidaire refrigerator error codes.

Last updated: February 2026

For the Frigidaire FRSS2623AW0 side-by-side refrigerator, the most common customer-reported issues are cooling problems (warm refrigerator section, frost buildup, long run times) and ice maker or water dispenser problems. In many cases, the fix starts with airflow, door sealing, and basic maintenance steps in the FRSS2623AW0 owner's manual.

• Refrigerator section not cold enough (food spoils faster)
• Freezer temperature swings or frost buildup
• Compressor running frequently (long run times)
• Ice maker not making ice or not making enough ice
• Water dispenser flow is slow or tastes off

These steps match what Frigidaire highlights in troubleshooting and setup guidance.

• Confirm doors seal fully on all sides; a small gap makes the unit run longer and cool poorly
• Level the refrigerator; Frigidaire recommends level side-to-side and about 1/4 inch (6 mm) tilt front-to-back
• Set temperatures to the recommended setting and allow 24 hours for temperatures to stabilize after changes
• Clean the condenser (dirty coils commonly cause weak cooling and long run times)
• For ice maker issues, verify the ice maker is ON and the house water supply is connected with no leaks
• If water or ice flow is weak, replace the water filter; for this model, a common replacement is the Frigidaire refrigerator water filter FPPWFU01

If basic checks do not fix it, these parts commonly relate to the symptoms above.

Cooling and ice maker complaints often share the same root causes: restricted airflow, poor door sealing, or water flow restrictions. Fixing those first prevents unnecessary part replacement and helps the refrigerator maintain stable temperatures.

For model-specific operating steps, settings, and troubleshooting tables, use the FRSS2623AW0 owner's manual.

Last updated: February 2026