Kenmore Elite 79046813991 dual-fuel slide-in range Parts

No. The Kenmore Elite dual-fuel slide-in range model 79046813991 does not use a single dedicated “reset” button; most resets are done by canceling an active function at the control panel or by power-cycling the range to reboot the electronic control. See the 79046813991 owner's manual for the exact key sequences.

• Cancel a cooking mode: press the oven CANCEL/OFF key (wording varies by panel).
• Clear a repeating timer alarm: when the timer ends, push and hold the timer ON/OFF key for about 4 seconds to stop the reminder beeps.
• Exit child lockout: use the lockout key sequence shown in the manual (this feature prevents oven elements from turning on).
• Reboot the control: turn the range breaker OFF, wait 2 to 5 minutes, then turn it back ON.
• After a power outage: reset the clock and reselect your cooking settings.

1. Press CANCEL/OFF once to stop the current function.
2. If the display is stuck in a timer alert, hold timer ON/OFF for 4 seconds.
3. If the oven will not start, check whether child safety lockout is enabled.
4. Power-cycle at the breaker for 2 to 5 minutes.
5. If heating is still incorrect after a reboot, troubleshoot temperature sensing.

If the oven temperature is erratic, a reset may only be temporary. These parts commonly affect control behavior:

On electronic ranges like the Kenmore Elite 79046813991, “resetting” usually means stopping a feature (timer, lockout, bake) or rebooting the control. If a fault keeps returning, the control is reacting to an underlying condition such as a sensor or wiring problem.

Last updated: February 2026

On Kenmore Elite range model 79046813991, the oven door typically unlocks automatically after a self-clean cycle once the oven cools for about 1 hour and the “LOCK” indicator goes out. If you stopped self-clean, press STOP/CLEAR and wait for the cool-down unlock. See the 79046813991 owner's manual.

• Confirm the display shows “LOCK”; that means the motorized latch is engaged.
• If the oven is still hot, do not force the door; forcing can damage the door locking system.
• If you just ran or interrupted Self Clean, expect a 1-hour cool-down before it unlocks.
• Make sure no bake or broil cycle is active; cancel cooking first.
• If the control is unresponsive, check the home breaker for a quick reset (power off, then back on).

1. Press STOP/CLEAR to cancel or interrupt the self-clean cycle.
2. Wait for the oven to cool; the lock remains until the oven cools for about 1 hour.
3. Open the door only after “LOCK” disappears.

This points to a mechanical bind at the hinges or latch area.

• Let the oven cool completely.
• Gently lift and close the door fully, then try opening again.
• If the door was recently removed, re-seat it using the hinge-lock procedure in the 79046813991 owner's manual.

The lock is a safety feature designed to prevent opening the oven during high-temperature self-cleaning. Waiting for the cool-down protects you from burns and prevents damage to the latch motor and door hinges.

Last updated: February 2026

Yes. Kenmore Elite is Kenmore’s premium line, and the 79046813991 Kenmore Elite dual-fuel slide-in range is built to deliver higher-end cooking performance and features than standard Kenmore models, while still fitting a mainstream kitchen and budget.

Kenmore Elite typically earns the “high end” label because it focuses on performance, fit and finish, and feature depth rather than basic cooking functions.

Common high-end traits you’ll see with Elite ranges include:

• Dual-fuel cooking (gas cooktop with an electric oven for steadier baking)
• More precise oven temperature control and better heat distribution
• Convection cooking capability (on many Elite models)
• Heavier-duty knobs, grates, and door hardware compared with entry-level ranges
• More cooking modes and control options than basic models

For model-specific features and control functions, use the 79046813991 owner’s manual.

“High end” often means more specialized components and tighter performance expectations. When troubleshooting issues like uneven baking, temperature swings, or ignition problems, using the correct model-matched parts and procedures helps restore the range’s intended performance.

If you’re diagnosing an oven temperature problem, a common component to check is the oven temperature sensor; for this model, see the sensor probe 316217002.

Last updated: February 2026

Your Kenmore Elite model 79046813991 is an Elite dual-fuel slide-in range, not a dryer; dryer load capacity (cubic feet) does not apply. For this range, “capacity” usually means oven cavity size, and the exact cubic-foot capacity is listed in the 79046813991 owner's manual.

Most customers mean one of these:

• Oven capacity (cu ft): how much the oven cavity holds
• Rack capacity: how much cookware you can fit across racks
• Burner output (BTU): cooking power on the gas cooktop
• Warming drawer capacity: how much food fits in the warmer drawer

We recommend checking the specifications section in the 79046813991 owner's manual. If you have the range in front of you, you can also confirm the model and serial tag location:

• Open the oven door and look on the left side of the range frame
• Or check inside the drawer along the side of the frame

Using the correct capacity spec helps you choose the right cookware size, plan multi-rack baking, and avoid airflow restrictions that can cause uneven baking or longer preheat times.

Last updated: February 2026

On the Kenmore Elite range model 79046813991, the model and serial number are printed on an identification plate on the left side of the range that’s visible when the oven door is open, or inside the drawer along the side of the frame (check both spots). See the 79046813991 owner's manual for the exact identification-plate locations.

• Open the oven door and look along the left side frame (the ID plate is visible with the door open).
• Pull out the bottom drawer and look inside the drawer opening, along the side of the frame.
• Use a flashlight; the plate is often metallic and can blend into the frame.
• Wipe grease or dust off the frame edge so the numbers are readable.
• Record both the model and serial number before ordering parts.

The identification plate typically includes:

• Model number (for this unit: 79046813991)
• Serial number
• Electrical ratings and other manufacturing information

We use the model number to match the correct Kenmore Elite dual-fuel slide-in range parts, diagrams, and fitment notes. Even small model-number differences can change parts like an oven light bulb 316538904 or an oven temperature sensor probe 316217002.

Last updated: February 2026

If your Kenmore Elite range model 79046813991 is not working, the most common causes are a power supply problem, a control fault (often shown as an F-code), or a burner ignition issue such as clogged ports or an igniter/switch problem. Use the 79046813991 owner's manual troubleshooting checklist to narrow it down safely.

• Confirm the range cord/plug is fully seated in the outlet.
• Check the home breaker or fuses; a partial trip can leave the cooktop or oven dead.
• If there was a power outage, turn the oven off and restart after power is stable.
• If the control is beeping and shows F1, F3, or F9, press CLEAR; if the code returns, schedule service.
• For gas surface burners: push in and turn the knob fully to LITE until ignition.
• If burners click but do not light, clean clogged burner ports and dry the burner parts.

These parts match model 79046813991 and are often involved in no-heat or no-ignition symptoms:

• Cooktop burner igniter 318148700 (no spark at a burner)
• Cooktop burner igniter switch 318037700 (no clicking/sparking when turning knobs)
• Sensor probe 316217002 (oven temperature problems, erratic baking)
• Terminal block 5304409888 (power connection issues at the range)

A range can fail in different ways depending on whether the issue is electrical (power, terminal block, control fault) or ignition-related (knob setting, clogged ports, igniter/switch). Matching the symptom to the right system prevents unnecessary parts replacement and gets you back to cooking faster.

Last updated: February 2026