Craftsman 113298050 10" motorized saw Parts

If your Craftsman 113298050 table saw still runs, we recommend selling, donating, or giving it away; if it is broken or unsafe, take it to a local scrap-metal recycler or a household recycling/transfer station that accepts power tools. Before moving it, unplug it and remove the blade and accessories for safer handling (see the owner's manual).

Safe prep before disposal (do this first)

• Turn the switch OFF and unplug the saw from the outlet.
• Lower the blade below the table surface before removing the table insert.
• Remove the blade using the proper wrenches; keep hands well above the blade.
• Reinstall the correct table insert after blade removal so the opening is covered during transport.
• Bag and label small parts (miter gauge, fence hardware, guard fasteners) so nothing falls out.
• If the power cord is worn or cut, stop using the saw and treat it as non-working for disposal.

Best disposal options (from most value to least)

Option	Best when	What to do
Sell or give away	Saw runs and cuts safely	Include the fence, miter gauge, blade guard, and any extra inserts you have.
Donate	Working tool, you want it reused	Provide the model number 113298050 and note any missing safety parts.
Recycle as scrap metal	Non-working, rusted, or incomplete	Remove the blade and loose accessories; recycle the main saw body as metal.
Transfer station drop-off	You want one-stop disposal	Ask if they accept corded power tools and mixed metal.

Blade and sharp parts: handle separately

A table saw blade is sharp and heavy, so we treat it like a separate item.

• Remove the blade before transport.
• Wrap the blade in cardboard and tape it closed.
• Keep it out of curbside bins unless your local program explicitly allows it.

Why it matters

Disposing of a table saw the right way prevents injuries during handling and keeps metal and electrical components out of the trash stream. It also helps the next owner use the saw with key safety items like the blade guard and spreader.

For parts lookups by model number and general ordering help, use Sears PartsDirect.

Last updated: February 2026

Yes. Craftsman table saws are a solid choice for many DIYers and hobby woodworkers because they’re typically sturdy, serviceable, and capable of accurate cuts when properly set up. For the Craftsman 113298050 10-inch motorized saw, good results come down to alignment, a smooth fence, and consistent maintenance (all covered in the owner's manual).

What “good” usually means for a Craftsman table saw

Most owners judge a table saw on cut quality, repeatability, and how well it holds adjustments. With the 113298050, you’ll usually be happy if you want:

• Reliable ripping and crosscutting for home projects
• A durable cast table surface that stays flat when cared for
• Straight cuts after you tune the fence and blade alignment
• Easy-to-find standard hardware (nuts, washers, retaining rings) for upkeep
• A saw you can maintain long-term with cleaning and lubrication

Where Craftsman saws shine (and where they can frustrate)

These are the most common pros and cons we see across Craftsman table saws, including older 113-series designs.

Area	Typically a strength	Common limitation	Best practice
Build	Sturdy, repairable design	Needs periodic tuning	Recheck alignment after moving the saw
Accuracy	Good once dialed in	Fence can be the weak link	Measure fence-to-blade parallel before precision work
Maintenance	Straightforward	Sawdust buildup affects performance	Blow out dust and keep mechanisms clean
Value	Strong for the price	May need upgrades for “pro” workflows	Add jigs/sleds for repeatable cuts

Setup and maintenance that make a big difference

The manual emphasizes basic care that directly affects performance and safety:

• Unplug the saw before maintenance or lubrication.
• Keep sawdust from accumulating inside the saw and motor area.
• Wax the table so workpieces slide smoothly.
• Replace a worn or damaged power cord immediately.
• Keep anti-kickback pawls sharp and functioning.

Why it matters

A table saw can feel “great” or “terrible” based on tune-up alone. A properly aligned blade, smooth elevation/tilt movement, and a clean cabinet reduce burning, binding, and kickback risk while improving cut accuracy.

Parts and support

For replacement parts and diagrams for the Craftsman 113298050, start with the model parts list; if you’re shopping across models or need additional help finding the right item by model number, use Sears PartsDirect.

Last updated: February 2026

No. Table saw arbor nuts are not all the same size or thread; they must match the saw’s arbor shaft. On the Craftsman 113298050, the arbor nut is a specific part of the blade mounting stack (arbor, collars, nut), so you should use the correct nut for this model and install it as shown in the owner's manual.

What actually varies between arbor nuts

Arbor nuts differ by the arbor’s thread and the wrench size needed to tighten them. Common differences include:

• Thread diameter and pitch (must match the arbor exactly)
• Right-hand vs left-hand thread (some saws use reverse threads on certain arbors)
• Nut thickness and flange/washer style (affects how the blade collars clamp)
• Wrench size (the flats can vary even when the thread matches)
• Application (standard blade stack vs dado stack)

Quick guide: what’s “standard” and what isn’t

Many 10-inch table saws use a 5/8-inch blade bore, but that does not guarantee the arbor nut is universal.

Item	Often standardized?	What it means for you
Blade bore (10-inch blades)	Often	Many blades fit many saws
Arbor nut thread	No	Nut must match the arbor
Arbor collar fit	No	Collars must seat correctly

Model-specific tips for the Craftsman 113298050

Our manual for this saw calls out correct blade installation and tightening technique:

• Unplug the saw before changing the blade
• Use the arbor wrench on the arbor flats and the arbor nut wrench on the nut
• Keep hands well above the blade while loosening/tightening
• Make sure the blade teeth point toward the front of the saw
• Keep the blade and collars clean and free of burrs
• Tighten the arbor nut securely but do not overtighten; snug it with the wrench

Dado stack note (why nut fit matters even more)

On this Craftsman saw, the arbor length limits the widest dado cut to 13/16 inch. The manual also notes collar order and that the arbor nut must be tight when using a dado head.

Why it matters

Using the wrong arbor nut (wrong thread, wrong thickness, or wrong seating) can prevent the blade collars from clamping correctly. That increases the chance of blade wobble, poor cut quality, and unsafe operation.

For replacement parts lookup by model number, we recommend starting with the parts list for Craftsman 113298050, or searching by model on Sears PartsDirect.

Last updated: February 2026

Yes. On the Craftsman 113298050 10-inch motorized table saw, you can use an 8-inch blade as long as the blade fits the saw’s arbor and is rated for at least the saw’s operating speed; follow the safety and setup rules in the 113298050 owner's manual.

What must match for the blade to be compatible

Before you install an 8-inch blade, confirm these basics:

• Arbor (bore) size: The blade’s center hole must match your saw’s arbor size (many 10-inch saws use a 5/8-inch arbor; verify yours in the manual).
• Speed rating: The manual warns not to use any blade or cutting tool marked for an operating speed less than 3450 RPM.
• Blade type and intended cut: Choose a blade designed for your material and cut (rip, crosscut, combination, dado set).
• Correct mounting hardware: Install arbor collars and the arbor nut properly.
• Direction and height: Confirm correct rotation direction and keep the blade as low as practical for the cut.

What changes when you drop from 10-inch to 8-inch

An 8-inch blade works, but it changes performance and setup expectations.

What you’ll notice	10-inch blade (designed size)	8-inch blade (smaller size)
Cutting depth	Maximum capacity	Reduced cutting depth
Guard and insert fit	Typically best match	May require extra attention to insert and guard clearance
Best use	General ripping and crosscutting	Lighter-duty cuts, thinner stock, some non-through operations

Safety setup reminders that matter most

These points come straight from common table saw safety rules emphasized in the manual:

• Keep guards in place whenever possible.
• Never operate without the proper table insert installed and flush.
• Keep hands out of the blade path; use push sticks or push blocks when needed.
• If the blade stalls, turn the switch off before freeing the work.

Why it matters

Using a smaller blade reduces cutting capacity and can change how your guard, insert, and work helpers behave during the cut. Following the manual’s speed rating and guarding guidance helps prevent kickback and contact injuries.

For replacement blades and accessories, search by model number on Sears PartsDirect.

Last updated: February 2026