Kenmore Pro 79079523600 dual-fuel range Parts

On the Kenmore Pro dual-fuel range model 79079523600, the F30 error code points to an oven temperature sensing problem; most often the oven temperature sensor (probe) circuit is open because the sensor is unplugged, failed, or has damaged wiring. See the troubleshooting section in the 79079523600 owner's manual.

What to check first (safe, quick steps)

• Press Clear/Off (or any key) to stop beeping and clear the display, then try baking again.
• Turn power off at the breaker for 1 minute, then restore power and retest.
• If the code returns quickly, avoid using the oven until the sensor circuit is checked.
• If the cooktop works but the oven throws F30, focus on the oven sensor and its harness, not the surface burners.
• If you recently moved the range or did a cleaning, recheck for a loose connector at the sensor.

Likely causes of an F30 code

In most ranges like the Kenmore Pro 79079523600, F30 is triggered when the control cannot read the oven temperature correctly.

Likely cause	What it means	Typical fix
Failed sensor	Sensor is out of spec or open	Replace the sensor
Loose connection	Plug or connector not fully seated	Reseat connector
Damaged wiring	Harness is pinched, burned, or broken	Repair/replace wiring
Control issue (less common)	Control misreads a good sensor	Diagnose control after sensor checks

Parts that commonly solve F30 on this model

If testing confirms the sensor circuit is the issue, the most common replacement is the oven temperature sensor.

• Frigidaire range oven temperature sensor 316217002

Why it matters

When the control cannot trust the temperature reading, it may shut down heating to prevent overheating or unsafe operation. Fixing the sensor circuit restores accurate baking temperatures and helps prevent repeated shutdowns.

Last updated: February 2026

To reset your Kenmore Pro dual-fuel range model 79079523600, we recommend a simple power reset: turn the range circuit breaker off for 1 to 5 minutes, then turn it back on. This clears many control glitches and restores normal operation.

Recommended reset steps (safe and effective)

• Turn the oven controls to Off.
• Switch off the range circuit breaker (or range line fuse) at the main electrical panel.
• Wait 1 to 5 minutes.
• Switch the breaker on.
• Set the clock (if needed) and test Bake.
• If the display is flashing after a power interruption, program the oven again after power is restored (the oven may not accept settings until the control stabilizes).

If the control is beeping or showing an error code

Your manual notes that when the electronic control detects a fault, it may beep and display an “F” code.

Try this sequence:

• Press any key to stop the beeping and clear the display.
• Reprogram the oven.
• If the same fault returns, write down the code; it helps pinpoint whether the issue is a sensor, wiring, or a control.

Common parts related to recurring fault codes

If the fault keeps coming back after a reset, these are common repair paths for this model family:

Symptom after reset	Common cause	Example part on this model page
Oven temp seems wrong, erratic, or triggers faults	Temperature sensor out of range	Frigidaire range oven temperature sensor 316217002
Random beeping, dead keys, or unstable display	Control board or display/control issue	Dua- fuel range electronic analog control board 316460212

If the issue happened during or after self-clean

If you need to stop a self-clean cycle due to heavy smoke, turn both the selector and temperature knobs to Off, then wait for the oven to cool. The door stays locked until the oven cools for about 1 1/2 hours; do not force it open.

Why it matters

A reset fixes temporary control lockups, power-surge glitches, and some “stuck” states after self-clean. If symptoms return immediately, the reset is a strong clue that a component (sensor, wiring connection, or control board) needs attention.

For model-specific control behavior and error-code guidance, use the owner's manual. You can also search additional parts by model number on Sears PartsDirect.

Last updated: February 2026

Kenmore is a brand name, and different companies have manufactured Kenmore ranges over the years. For the Kenmore Pro dual-fuel range model 79079523600, the 790 model prefix is commonly associated with Frigidaire/Electrolux-built units; use the 79079523600 owner's manual to confirm the exact model identification details for your appliance.

How to confirm who built your specific range

We recommend using the model and serial information on the appliance itself, then matching it to the documentation.

• Check the serial plate for the full model number and serial number
• Confirm the model format shown in the manual (for example, it may appear as 790.79523)
• Compare the model prefix (790) to the parts used on the range
• Look for Frigidaire/Electrolux-branded component families (common on 790-prefix Kenmore ranges)
• Use the parts list for your model to verify compatible replacement parts

What the parts list tells you (quick clues)

Many Kenmore 790-prefix ranges use component designs and part families that are widely used on Frigidaire-built platforms. For example, these model-compatible parts are listed for 79079523600:

Part type	Example part on this model	What it supports
Oven temperature sensing	Frigidaire range oven temperature sensor 316217002	Helps the control maintain accurate oven temperature
Electronic control	Frigidaire range oven control board 318601500	Manages bake/broil logic, timing, and temperature control
Ignition system	Cooktop spark module 5304505695	Creates spark for gas burner ignition

Why it matters

Knowing who built the platform helps you troubleshoot smarter and choose the right replacement parts (for example, an oven temperature issue often points to the sensor, wiring, or control board). It also helps when you are comparing part families across similar Kenmore Pro dual-fuel ranges.

If you need to order parts for 79079523600, use the parts list for this model first; you can also search by model number on Sears PartsDirect.

Last updated: February 2026

The Kenmore Pro dual-fuel range model 79079523600 is a 30-inch class slide-in range; the exact overall width, height, depth, and required clearances are specified in the model’s installation guide. Use those measurements for cabinet and countertop planning so the range fits flush and vents correctly.

What “size” usually means for this model

Customers typically mean one (or more) of these:

• Overall exterior dimensions (width, height to cooktop, depth to front)
• Installation cutout and clearances (side, rear, and overhead spacing)
• Oven capacity (cubic feet) and usable rack space
• Door swing and handle depth (important for aisle clearance)

Where to find the exact measurements

We recommend using the documents made for 79079523600:

• Check the dimensioned drawings and clearance charts in the installation guide
• Use the owner's manual for feature details that affect usable space (rack positions, convection, etc.)
• Measure your opening and compare it to the guide before moving gas or electrical connections

Quick planning checklist (before you buy or install)

• Measure the opening width at the front and back of the cutout
• Confirm countertop height and the range’s leveling range
• Verify depth to the front of the door/handle so it does not block walkways
• Confirm required clearances to combustibles and adjacent cabinets
• Plan access to the rear for the power cord, gas line, and anti-tip bracket

If you mean…	Use this document	Why
Exterior dimensions and clearances	Installation guide	Prevents gaps, interference, and ventilation problems
Oven capacity and rack space	Owner's manual	Helps you judge cooking space and rack positions

Why it matters

Slide-in ranges like 79079523600 depend on precise clearances for safe operation and a clean, built-in look; using the installation dimensions prevents door interference, heat damage to cabinets, and leveling issues.

You can order replacement parts for 79079523600 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026