Kenmore Elite 11067092600 dryer Parts

On Kenmore Elite dryer model 11067092600, the model number is printed on the rating label. You’ll typically find that label on the door opening (cabinet frame) when you open the dryer door; some units also place it on the back near the top.

• Open the dryer door and check the cabinet frame around the door opening
• Look along the inside edge of the front panel near the lint screen housing
• If you don’t see it inside the door area, check the back panel near the top
• Wipe dust off the label; the print can be faint
• Take a photo of the label so you can zoom in and read it clearly

The rating label normally lists the details you need to match parts and diagrams accurately.

We use the exact model number to pull the correct parts breakdown and ensure you get the right items the first time (for example, a belt, thermal fuse, or drum support parts can vary by model series).

For model-specific identification details and service information, use the 11067092600 owner’s manual.

Last updated: January 2026

A Kenmore dryer typically lasts 10 to 13 years. For your Kenmore Elite 11067092600, regular airflow maintenance (lint screen and vent cleaning) and avoiding chronic overheating are the biggest factors that help it reach the high end of that range.

• Vent restriction and lint buildup: poor airflow makes the dryer run hotter and longer.
• Overloading: strains the motor, belt, and drum support system.
• Heat stress: repeated overheating can trip or weaken safety parts.
• Wear parts: belts, rollers, and idlers wear with normal use.
• Cleaning intervals: the manual calls out periodic lint removal from the cabinet and exhaust vent.

Use the care steps in the 11067092600 owner’s manual and focus on these habits:

• Clean the lint screen every load.
• Keep the exhaust venting clear and properly routed.
• Have lint removed from inside the cabinet and from the exhaust vent about every 2 years (more often with heavy use).
• Do not run the dryer when you are away from home.
• Keep the dryer level and stable to reduce vibration and wear.

A dryer that is forced to run hot because of lint or vent restrictions wears out faster and can repeatedly blow thermal safety parts. Good airflow keeps cycle times normal, protects the heating system, and reduces stress on the motor and drum drive.

Last updated: January 2026

For your Kenmore Elite dryer model 11067092600, we find cubic feet (capacity) by calculating the drum’s internal volume (width x depth x height) and converting to cubic feet. The most reliable shortcut is to check the capacity listed in the 11067092600 owner's manual.

1 cubic foot = 1,728 cubic inches.

• Unplug the dryer for safety.
• Measure the inside of the drum (not the cabinet):
  • Diameter (side-to-side across the opening)
  • Depth (front-to-back inside the drum)
• Treat the drum like a cylinder and calculate:
  • Cubic inches = π x (diameter/2)² x depth
  • Cubic feet = cubic inches ÷ 1,728

If the drum measures about 27 in diameter and 20 in deep:

Most full-size Kenmore and Whirlpool-built dryers are typically 6.0 to 7.5 cu ft. If your calculation lands in that range, it is consistent with a standard-capacity dryer.

Knowing cubic feet helps us match your dryer to the right load size and cycle expectations; overloaded drums restrict airflow and can increase dry times. Good airflow also helps prevent overheating that can trip safety parts like a dryer thermal fuse WP3390719.

• Measure in inches to keep the math consistent.
• Measure the drum depth at the centerline (not at an angle).
• Ignore baffles; measure the usable drum space.

Last updated: January 2026

To reset your Kenmore Elite dryer model 11067092600, we recommend a simple power reset: unplug the dryer (or switch off the breaker) for about 1 minute, then restore power and press and hold START to resume or restart a cycle. See the 11067092600 owner's manual for model-specific control steps and code clearing.

• Power reset: Unplug for 1 minute, plug back in.
• Restart after a power failure (PF): Press and hold START to restart.
• Clear a running cycle: Press STOP once to pause, or STOP twice to cancel.
• Restart after opening the door: Close the door and press START (if interrupted more than 5 minutes, select a new cycle).
• Low airflow code (AF): Press STOP once to clear the display countdown; fix the venting issue so the code does not return.

A reset restores the control, but it will not bypass a safety shutdown. If the dryer will not start or stops quickly, check these common causes:

• House power issue (tripped breaker, loose cord connection)
• Door not fully closed or door switch problem
• Clogged lint screen or restricted venting (can trigger airflow problems)
• Overheating protection opening (often tied to airflow)
• Blown thermal fuse such as the dryer thermal fuse WP3390719

The manual notes that AF indicates a low airflow condition. Fixing airflow is the real “reset” because the code can reappear each cycle until venting improves.

Resetting is useful for clearing a temporary control glitch or recovering from PF, but airflow problems and heat-related shutdowns can keep coming back until the venting and safety components are addressed.

Last updated: January 2026