Kenmore Elite 79080369310 microwave Parts

To reset a Kenmore Elite microwave model 79080369310, we recommend doing a simple power reset first (unplug or switch off the breaker briefly, then restore power). For control-panel setting resets, use the Clock & Settings menu options shown in the 79080369310 owner's manual.

Quick reset options (most common)

• Power reset: Unplug the microwave (or turn off the circuit breaker), wait about 1 minute, then restore power.
• Cancel a running program: Touch STOP to cancel an active cooking cycle or timer.
• Exit Demo mode (if the unit will not heat): Use Clock & Settings to reach the Demo setting, then toggle it off.

Control-panel reset for a common setting (lbs/kg)

This model includes a control reset tied to the weight unit setting:

What you see	What it means	What to do
Display shows kg	Weight units set to kilograms	Press START to reset controls to lbs
You want kg again	Return to kilograms	Press Clock & Settings five times, then press START

If “reset” does not fix the problem

A reset clears temporary control glitches, but it will not correct a door-safety or heating failure. Check these common causes:

• Door not fully closed or latch not engaging
• A door switch not actuating correctly
• Unit is in Demo mode (runs but does not heat)
• Heating circuit issue (diode, magnetron, capacitor)

If the door feels loose or the unit will not start consistently, the door-switch system is a frequent culprit on over-the-range microwaves. Parts that relate to this include the microwave door switch 5304509459 and the latch hook 5304509457.

Why it matters

Resetting the control correctly helps you avoid unnecessary part replacement and quickly rules out a simple control lockup, a running timer, or a settings mode that can make the microwave seem “dead” or not heating.

Last updated: January 2026

Kenmore microwaves are a good choice for most homes because they typically deliver reliable everyday heating and solid value for the price. For the Kenmore Elite 79080369310 microwave/hood combo, long-term performance depends most on correct installation, proper venting, and keeping key safety and airflow areas clean (see the 79080369310 use and care guide).

What “good” means for a microwave/hood combo

A microwave/hood combo has two jobs: cooking and ventilation. In real-world use, a “good” unit is one that heats evenly, runs quietly, and vents smoke and steam effectively.

• Consistent heating for reheating and defrosting
• Vent fan that moves air well (and is used regularly)
• Door that closes firmly and latches smoothly
• Controls that respond consistently
• Easy-to-maintain filters and interior surfaces

What to watch for over time (common ownership issues)

Most complaints we see across over-the-range microwaves are tied to wear items or airflow problems, not the cabinet itself.

Symptom	Common cause	What to check first
Runs but does not heat	High-voltage component issue	Stop using and schedule service
Starts then stops, or will not start	Door switch or latch issue	Door alignment and switch function
Loud buzzing or humming	Diode, magnetron, or transformer	Stop using and schedule service
Poor venting	Grease filter clogged or fan issue	Clean/replace filter; verify vent path

If the door is not latching correctly, the latch hook 5304509457 and door switch system are common inspection points.

How to get the best performance from your Kenmore Elite

• Use the vent fan whenever you cook on the range
• Clean or replace the grease filter on a regular schedule
• Keep the waveguide cover clean and intact to prevent arcing
• Avoid running the microwave empty
• Use microwave-safe containers and cover foods to reduce splatter

For heating complaints, follow the troubleshooting steps in why is my microwave not heating.

Why it matters

A microwave that is installed correctly and kept clean runs cooler, vents better, and puts less stress on electrical parts like door switches and high-voltage components. That directly improves reliability and day-to-day cooking results.

Last updated: January 2026

For Kenmore Elite model 79080369310, the overall exterior size is typically about 30 inches wide and 16 to 17 inches high; depth is commonly 15 to 17 inches for over-the-range microwave/hood combos. For the exact published dimensions for your unit, confirm them in the 79080369310 owner's manual.

What we can confirm from the installation requirements

The installation guide for this model family calls out the standard over-the-range mounting space:

• 30 inches minimum cabinet opening width
• 30 inches minimum from cooking surface to the bottom of the cabinet
• 66 inches minimum from the floor to the top of the microwave
• The microwave must be secured to at least one wall stud

These measurements help you plan fit and safe mounting, even if you are only measuring for replacement. See the 79080369310 installation guide for the full template and mounting details.

Quick measurement checklist (before you buy or replace)

Use a tape measure and record:

• Width across the front trim (left to right)
• Height from the bottom edge to the top of the cabinet-facing surface
• Depth from the wall to the front edge (include the door curve/handle)
• Clearance above the cooktop (verify the 30-inch minimum)
• Cabinet opening width (should be at least 30 inches)

Typical exterior size ranges (over-the-range microwaves)

Dimension	Typical range	What affects it
Width	29 7/8 in (about 30 in)	Standard cabinet opening
Height	16 to 17 in	Venting design, trim style
Depth	15 to 17 in	Door shape, handle, vent grille

Why it matters

Correct dimensions prevent cabinet interference, ensure proper vent alignment, and help maintain safe clearance above the range. Even small depth differences can affect door swing and backsplash clearance.

Last updated: January 2026