Whirlpool WFE515S0ES2 electric range Parts

Whirlpool electric ranges (including model WFE515S0ES2) are generally a solid, value-focused choice for everyday cooking; they tend to offer dependable baking and straightforward controls, with most long-term satisfaction coming from proper cleaning, correct cookware, and timely replacement of wear parts when performance changes.

In our experience, most owners like Whirlpool ranges for practical performance and easy ownership, especially when the cooktop and oven are kept clean and the oven temperature is verified occasionally.

Common strengths

• Good overall value for the features you get
• Consistent baking once preheated and used with the right rack position
• Simple, familiar controls on many models
• Widely available replacement parts for normal wear

Common complaints we see across electric ranges

• Cooktop surfaces can show scratches or stains if abrasive cleaners or rough cookware are used
• Heating performance can feel “uneven” when a surface element or control switch starts failing
• Oven temperature can drift over time (often correctable with calibration or a sensor repair)

If your WFE515S0ES2 is slow to preheat, bakes unevenly, or a burner cycles oddly, it is often a specific component rather than the whole range.

• If baking temps seem off, check the range oven temperature sensor WPW10181986
• If the oven will not heat or heats inconsistently, inspect the range bake element WP9755770
• If a surface burner will not regulate heat, a control like the infinite switch WP3149400 can be the cause

A range that seems “bad” can waste time and food, but targeted fixes (sensor, bake element, surface control switch) often restore performance and extend the life of the appliance.

If you are seeing a fault code on the display, start with Whirlpool freestanding range error codes.

Last updated: January 2026

To reset the self-clean cycle on our Whirlpool WFE515S0ES2 electric range, first let the oven cool and confirm the door lock has released; then restore power by turning the range circuit breaker OFF for 1 minute and back ON. If the door stays locked or an error returns, the lock system may need service.

• Press Cancel/Off once to stop the cycle (if the control responds).
• Wait for the oven to cool; the door lock will not release until it is safe.
• Turn the range breaker OFF for 60 seconds, then turn it ON.
• Set the clock if it reset (some controls require this before cooking).
• Try a normal Bake cycle for a few minutes to confirm operation.

A locked door after self-clean is usually caused by heat still being sensed, a stuck latch, or a control that thinks the lock is engaged.

• Give it more cool-down time (self-clean can keep the lock engaged well after the cycle ends).
• If the control shows an error, use our Whirlpool error codes reference to identify the code.
• If the latch motor runs but the door never unlocks, inspect the door lock mechanism.

Common part to check for this model:

• Range oven door lock assembly WPW10107820

If the reset clears the display but the oven will not bake or broil, a failed heating circuit or sensor can be the cause.

• Confirm you have 240V power at the range (a tripped half-breaker can leave the display on but prevent heating).
• Check for visible damage on the bake element.
• If temperatures are inaccurate or you get sensor-related errors, test the oven sensor.

Self-clean runs at very high temperatures; the control intentionally locks the door and monitors temperature for safety. Resetting power can clear a “stuck” control state, but repeated lock or error problems often point to a door lock, sensor, or heating component that needs attention.

Last updated: January 2026

We cannot estimate a precise life expectancy for the Whirlpool WFE515S0ES2 from model-specific information alone because lifespan depends more on cooking frequency, cleaning habits, and whether key heating and control components are repaired promptly. Many electric ranges provide years of service when maintained and repaired as needed.

• How often you bake and broil (high-heat daily use wears parts faster)
• Spillovers and grease buildup around burners and controls
• Power quality (surges can stress electronic controls)
• Door use (hinges and door hardware wear with heavy use)
• Venting and airflow (overheating can shorten component life)

If the cabinet and cooktop are in good shape, replacing common wear parts can restore performance and help you keep the range longer. Examples of model-compatible parts include:

• Range bake element WP9755770
• Range oven temperature sensor WPW10181986
• Range broil element W10856603

A realistic lifespan expectation helps you decide whether to repair or replace. On many electric ranges, fixing a heating issue (element or sensor) is often more cost-effective than replacing the entire appliance.

If your display shows a fault code or the oven is beeping, start with Whirlpool error codes to narrow the problem before choosing parts.

Last updated: January 2026