Kenmore 11029632800 washer Parts

Yes, many Kenmore top-load washers like model 11029632800 use a drain pump and internal screens rather than a large, user-cleanable “lint filter.” Routine maintenance focuses on checking the drain path and pump area for debris and following the cleaning steps in the 11029632800 owner's manual.

On this style of Kenmore washer, lint and small debris are typically managed in a few places:

• The drain pump and pump inlet area (coins, hair pins, small items can collect here)
• The drain hose (kinks or buildup can restrict flow)
• The inlet valve screens at the water connections (sediment can reduce fill)
• The wash action and rinse carry lint away rather than trapping it in a removable cartridge

If you are troubleshooting poor draining, the most common “filter-like” restriction is at the pump.

1. Unplug the washer.
2. Confirm the drain hose is not kinked and is secured properly (height and routing matter).
3. Run a drain and spin cycle with the tub empty to see if water evacuates strongly.
4. If draining is slow or noisy, inspect the pump area for obstructions.

If you find the washer is not draining correctly, these model-matched parts are often involved:

• Washer drain pump WP3363394 (moves water out of the tub)
• Drain hose routing and standpipe setup (installation-related)

A restricted drain path can leave water in the tub, cause poor rinsing, and lead to off-balance spinning. Keeping the drain system clear helps the washer clean better and reduces strain on the drive system.

Last updated: January 2026

To hard reset your Kenmore washer model 11029632800, unplug it (or switch off the breaker) for 2 minutes, then restore power and select a normal cycle to test. This clears many temporary control glitches without replacing parts; follow the exact reset steps in the 11029632800 owner's manual.

• Turn the washer OFF.
• Unplug the power cord (or turn the dedicated breaker OFF).
• Wait 2 minutes.
• Restore power.
• Lift and close the lid once, then select a cycle and press Start.
• If the washer still will not run, stop and check for a lid switch or drain issue.

A “reset” will not fix a failed safety switch or a drain problem. These checks usually pinpoint the cause:

• Lid won’t latch or no click: inspect the washer lid switch assembly WP8318084.
• Hums but won’t drain: check the drain hose for kinks and inspect the washer drain pump WP3363394 for a jam.
• Agitates poorly: worn agitator dog 80040 can cause slipping.
• Won’t spin, smells like rubber: a worn motor coupling is common on many Kenmore 110 designs (see coupling options for this model).

A hard reset is a fast way to clear a stuck cycle or minor electronic hiccup, but persistent no-start, no-spin, or no-drain symptoms usually point to a mechanical or safety component (lid switch, pump, coupling) that needs inspection.

Last updated: January 2026

Yes. Kenmore Elite is Kenmore’s higher-end lineup, positioned above standard Kenmore models with more features and a more premium feel. For Kenmore washer model 11029632800, the documentation we use for operation and installation does not identify it as an “Elite” model; treat it as a standard Kenmore washer unless the console or badge says Elite.

Kenmore Elite washers typically include upgrades that improve convenience and performance:

• More cycle and option choices (for example, extra rinse and specialty fabric care)
• Better noise and vibration control
• Higher-end controls and finishes
• Stronger spin performance to remove more water
• More robust drive and wash components (varies by series)

Use these quick checks to confirm the exact branding and feature set for your washer:

• Check the console, lid, or front badge for the word “Elite”
• Match your cycle names and options to the cycle descriptions in the 11029632800 owner’s manual
• Use the 11029632800 installation guide to confirm setup requirements (water pressure, drain height, electrical) that apply to this model

Knowing whether your washer is truly branded Elite helps set expectations for cycles and performance, and it helps you choose the right repair approach when diagnosing issues like agitation, spinning, or draining.

Last updated: January 2026