Agri-Fab 45-02601 lawn sweeper Parts

On the Agri-Fab 45-02601 lawn sweeper, we adjust brush height by changing how far the brush contacts the ground: set it low enough to sweep effectively, but high enough that the brush does not dig in or stall. After adjusting, test on a short pass and fine-tune.

• Park the tractor and sweeper on a flat surface.
• Stop the engine, set the parking brake, and remove the key.
• Empty the hopper so the sweeper sits at normal ride height.
• Locate the brush height adjustment hardware (typically a knob or handle near the brush housing).
• Raise the brush for thin debris or uneven ground; lower it for heavier leaf pickup.
• Spin the brush by hand to confirm it turns freely and does not rub the housing.

We aim for light, consistent contact with the turf.

These issues commonly mimic a bad adjustment:

• Worn or bent brush sections; replace the agri-fab lawn sweeper brush 46780 if bristles are short or uneven.
• Brush not clamped securely on the shaft; inspect retainers such as the agri-fab lawn sweeper brush retainer 23580.
• Drive parts slipping or not engaging; check the lawn sweeper drive pin 47046 for wear or damage.
• Wheels not rolling smoothly; inspect the agri-fab lawn tractor lawn sweeper wheel bearing 45088.

Proper brush height protects your turf, reduces premature brush wear, and keeps the sweeper from stalling or leaving debris behind. A small adjustment can make a big difference in pickup performance.

Last updated: February 2026

On the Agri-Fab lawn sweeper model 45-02601, the model number and date code are typically printed on a silver identification sticker on the sweeper housing; when you stand at the hitch and look down, it’s usually in the lower right corner near the ground and close to the wheel.

• Park the lawn sweeper on a flat surface and set the tractor parking brake.
• Stand at the front of the sweeper by the hitch assembly.
• Look down at the sweeper housing (the main body in front of the hopper).
• Check the lower right-hand corner of the housing.
• Look near the ground line and close to the wheel for a silver sticker.
• Wipe off dust and grass buildup so the numbers are readable.

Most Agri-Fab stickers include both a model number and a date code. Use the model number to match diagrams and parts.

Using the correct model number helps us match the right brush, wheel, and hardware for your sweeper so fit and performance stay correct.

• Check the opposite side of the housing and the hitch area for a second label.
• Look for an imprint on the sticker backing (sometimes the ink fades first).
• If you’re replacing common wear items while you’re identifying the unit, start with model-matched parts like the agri-fab lawn sweeper brush 46780.

Last updated: February 2026

Agri-Fab lawn sweepers (including model 45-02601) are made by Agri-Fab, Inc. They design and manufacture lawn and garden attachments such as tow-behind lawn sweepers, and replacement parts are available for common wear items like brushes, wheels, and bearings.

• Manufacturer: Agri-Fab, Inc.
• Equipment type: tow-behind lawn sweeper
• Common wear areas: brush, wheel assemblies, wheel bearings, hopper frame hardware
• Typical maintenance: keep brush height set correctly, check fasteners, and replace worn rotating parts

If your sweeper stops picking up well or starts making noise, these are the first parts we check on a 45-02601:

• Agri-fab lawn sweeper brush 46780
• Agri-fab lawn tractor lawn sweeper attachment wheel assembly 44985
• Agri-fab lawn tractor lawn sweeper wheel bearing 45088

Knowing the manufacturer helps you match the correct diagrams and hardware standards for your sweeper. Agri-Fab sweepers often share similar brush and wheel designs across models, but the safest way to avoid fit issues is to shop parts specifically for 45-02601.

Last updated: February 2026