KitchenAid KECC607BSS02 electric counter unit Parts

To reset your KitchenAid electric cooktop model KECC607BSS02, we recommend doing a full power reset at the breaker: turn the cooktop circuit breaker OFF for 1 minute, then turn it ON and watch the cooktop for about a minute to confirm normal operation.

Reset steps (breaker reset)

• Turn all cooktop controls OFF.
• Locate the cooktop circuit breaker in your home electrical panel.
• Switch the breaker OFF.
• Wait 60 seconds (this clears the control’s temporary fault state).
• Switch the breaker ON.
• Test each surface element on a low setting, then a medium setting.

If the cooktop still will not operate

A reset fixes many temporary control glitches, but repeated issues usually point to a failing electrical part or a loose/burned connection.

• If the display or touch controls act erratically, suspect the control electronics such as the cooktop electronic control WPW10545370 or electronic control board WPW10260060.
• If one element will not heat (or heats inconsistently), suspect the surface element itself such as the range dual radiant surface element W11517959 or cooktop surface element W10823720.
• If the cooktop is completely dead, check for a power connection problem at the terminal block WPW10245259.

Quick symptom guide

What you notice	Most likely area to check	Common next step
Cooktop dead, no lights	Power supply, terminal connections	Inspect wiring at terminal block (power off)
One burner not heating	Radiant surface element	Test element and swap with known-good position if possible
Random beeps, flashing, or unresponsive controls	Electronic control	Power reset; then inspect harness connections
Works briefly after reset, then fails again	Control or wiring issue	Check harness and control for heat damage

Why this matters

A breaker reset restores clean power to the cooktop’s electronic control. If the problem returns quickly, it helps narrow the issue to the control, wiring harness, or a surface element drawing abnormal current.

Last updated: February 2026

KitchenAid cooktops are covered by a one-year full warranty from the date of purchase for factory-specified parts and repair labor to correct defects in materials or workmanship when the appliance is operated and maintained as instructed. For model KECC607BSS02, use your purchase date to determine coverage.

First, confirm what type of cooktop you have

The model on this page, KECC607BSS02, is an electric radiant cooktop (not an induction cooktop). Warranty terms are tied to the exact model number on the rating label.

• Match the full model number exactly (KECC607BSS02)
• Use the purchase receipt date as the warranty start date
• Keep installation and service records
• Confirm the issue is a defect, not damage or misuse

What the 1-year full warranty covers

This warranty is intended to correct manufacturing defects.

• Factory-specified replacement parts
• Repair labor to correct defects in materials or workmanship
• Coverage during the first year of ownership

What is commonly not covered

These items typically fall outside full-warranty coverage.

• Damage from improper installation or incorrect wiring
• Power-supply issues such as loose or overheated connections
• Cosmetic wear from normal use (scratches, discoloration)
• Damage from cleaning methods that scratch or etch the surface

Parts often involved when a problem looks like a “warranty issue”

If you decide to troubleshoot or repair after checking your warranty paperwork, these are common parts associated with no-heat or power symptoms on this model.

Symptom	What to check	Example part for KECC607BSS02
One burner will not heat	Radiant surface element	Range radiant surface element W11171119
Dual burner not switching sizes	Dual radiant surface element	Range dual radiant surface element W11517959
Cooktop dead or intermittent	Power connection	Terminal block WPW10245259
Controls not responding	Control electronics	Electronic control board WPW10260060

Why it matters

Using the correct model number and purchase date keeps warranty decisions simple; it also helps you avoid replacing parts when the root cause is a wiring connection or control issue.

Last updated: February 2026

Your KitchenAid electric counter unit’s model number is on the appliance identification label; on cooktops like KECC607BSS02, it’s typically found on the underside of the cooktop (near the junction box area) or on the metal frame visible after lifting the cooktop from the countertop.

Where to look on a KitchenAid cooktop

Check these common label locations (power off at the breaker first):

• Underside of the cooktop base pan (you may need to look from inside the cabinet below)
• On the cooktop chassis or side rail, visible after loosening mounting brackets
• Near the wiring/conduit entry point (where the power cable connects)
• On the burner box area under the glass top

What the label looks like

The ID tag usually includes the model and serial information together.

• “Model” followed by a number like KECC607BSS02
• “Serial” followed by a longer mix of letters and numbers
• Electrical ratings (often 240V) and other manufacturing details

Quick ID checklist

Item on label	What it’s used for	Example
Model number	Matching parts and diagrams	KECC607BSS02
Serial number	Production details	Varies
Electrical rating	Verifying supply requirements	240V (typical)

Why it matters

Using the exact model number (including the last two digits) ensures we match the correct cooktop parts, wiring, and controls. For example, parts like the cooktop electronic control WPW10545370 can vary by revision even when the cooktop looks the same.

If the label is hard to read

• Wipe it gently with a damp cloth; avoid abrasive cleaners
• Take a photo and zoom in
• If the tag is damaged, compare your cooktop’s component layout to the parts diagrams and listings for KECC607BSS02

For more help identifying the correct number format, use our guide: how to find your appliance model number (and what it means for parts).

Last updated: March 2026