Kenmore Elite 79641473217 washer Parts

The model number label on your Kenmore Elite washer model 79641473217 is typically on the cabinet where it stays readable during service, most often around the door opening area on front-load designs. Use the model number to match the correct parts list and troubleshooting info in the 79641473217 owner's manual.

Most common places to check

Look for a sticker or metal tag with the model number and serial number in these spots:

• Behind the washer door on the door frame (door jamb)
• Around the door opening on the front cabinet
• Along the side of the main cabinet, usually near the lower front edge
• On the back of the control panel or rear cabinet panel

Quick tips to find it fast

• Open the door fully and scan the front frame from top to bottom.
• Use a flashlight; labels are often white or silver and can blend in.
• Wipe dust off the label gently; detergent residue can hide the print.
• Write the full model number exactly as shown (for this washer: 79641473217).

What the label usually includes

Label item	What it’s used for
Model number	Matching diagrams and correct replacement parts
Serial number	Identifying production run details for service
Electrical ratings	Confirming power requirements for safe testing

Why it matters

Kenmore Elite washers often have multiple versions that look similar. Using the exact model number helps us point you to the right diagrams and parts (for example, a door lock assembly or water inlet valve that fits your specific build).

Last updated: January 2026

To force-drain a Kenmore Elite washer model 79641473217, we recommend canceling the cycle and running a Drain/Spin (or Spin Only) cycle first. If the tub still will not empty, drain the water manually from the front pump filter area and then check for a clog in the drain path.

Fast ways to get it to drain

• Press Pause/Cancel (or Power) to stop the cycle.
• Select Drain/Spin and start the cycle.
• If it will not start, unplug the washer for 2 minutes, then try Drain/Spin again.
• If the tub is full, manually drain from the pump filter access area (see the 79641473217 owner's manual).
• Check the drain hose behind the washer for kinks, crushing, or a clogged standpipe.

Manual drain (when the washer will not pump out)

1. Unplug the washer.
2. Put towels and a shallow pan at the front lower access area.
3. Slowly open the pump filter cap (or drain port, if equipped) to let water out in a controlled way.
4. Remove lint, coins, socks, or debris from the filter cavity.
5. Reinstall the cap tightly, then run Drain/Spin again.

Parts that commonly cause a no-drain symptom

Symptom	Most common cause	What to check next
Hums but won’t drain	Drain pump jammed	Debris in filter, impeller obstruction
Drains slowly	Partial clog	Tub-to-pump hose, drain hose, standpipe
Stops and won’t unlock	Door lock issue	Door lock operation and wiring

If the pump is not moving water after the filter is cleared, the drain pump may be failing. For this model, a common replacement is the washer pump 3108ER1001E.

Why it matters

A forced drain is the safest way to prevent overflow and reduce strain on the motor and control. Clearing the pump filter and drain hose also helps prevent repeat no-drain errors and wet loads.

Last updated: January 2026

To hard reset your Kenmore Elite washer model 79641473217, unplug it to fully power down the control, then restore power and clear the cycle. This reset often fixes a frozen display, non-start symptoms, or a cycle that will not resume.

Hard reset steps (power cycle)

• Press Power to turn the washer off.
• Unplug the washer (or switch the breaker off).
• Wait 1 to 5 minutes to let the control board fully discharge.
• Plug the washer back in (or turn the breaker on).
• Press Power, then select a normal cycle and press Start.

Control-panel reset (if the washer powers on but acts “stuck”)

Some Kenmore Elite front-load models respond to a control-panel reset sequence. Use the button sequence shown in your 79641473217 owner's manual.

• Turn the washer on.
• Press and hold Power for about 10 seconds.
• Press and hold Pause/Cancel (or Start/Pause, depending on the panel) for about 10 seconds.
• Turn the washer back on and try a cycle.

If the reset does not help

A reset will not fix a failed component. These checks usually pinpoint the real issue:

• Door will not lock: inspect the latch area; a failed lock can stop the cycle. Consider the lg washer door lock assembly EBF49827801.
• Will not fill: confirm both supply valves are open and inlet screens are not clogged; a sticking valve can prevent filling. Consider the lg washer single-solenoid water inlet valve 5220FR2006H.
• Will not drain: check the drain path for clogs; a weak pump can leave water in the tub. Consider the washer pump 3108ER1001E.
• Out-of-balance shutdowns: reduce load size and redistribute items; suspension wear can worsen shaking.

Quick guide: reset vs. repair

Symptom	Try a hard reset?	Most common next step
Display frozen, buttons unresponsive	Yes	Power cycle, then retry cycle
Washer stops mid-cycle with water inside	Yes	Check drain path and pump
Door will not lock or unlocks during cycle	Sometimes	Inspect door lock and strike
No water enters	Sometimes	Check hoses/screens and inlet valve

Why it matters

A proper reset clears a control “glitch” after a power surge or interrupted cycle, but it also helps you confirm whether the problem is electronic (temporary) or mechanical (a part like a door lock, inlet valve, or drain pump).

Last updated: January 2026

Yes. Kenmore Elite is Kenmore’s premium appliance line, and the Kenmore Elite washer model 79641473217 is positioned as a higher-end option with upgraded performance, features, and fit-and-finish compared to standard Kenmore models. For cycle and feature details specific to your washer, use the 79641473217 owner's manual.

What “high end” means for Kenmore Elite washers

In our experience, “high end” shows up in practical, everyday benefits like these:

• More specialized wash cycles and options (bedding, heavy-duty, sanitize-style)
• Stronger spin performance for better water extraction and shorter dry times
• Better vibration control and quieter operation
• More advanced controls and built-in diagnostics for troubleshooting
• More refined drum movement and fabric care features

How Kenmore Elite compares within the Kenmore lineup

Here’s a simple way we frame the Kenmore tiers when shopping or comparing features.

Kenmore line	Typical positioning	What you usually get
Kenmore (standard)	Value and everyday performance	Core cycles, fewer premium options
Kenmore Elite	Premium	More features, stronger performance, more refinement
Kenmore PRO	Pro-style focus	Pro aesthetics and feature sets (varies by product type)

Why it matters for parts and troubleshooting

Premium washers often use more specialized components, so matching parts to model 79641473217 helps ensure proper fit and reliable operation.

Common examples on this model include:

• Fill problems or slow fill: washer water inlet valve 5221ER1003A or lg washer single-solenoid water inlet valve 5220FR2006H
• Won’t start or door won’t lock: lg washer door lock assembly EBF49827801
• Leaks at the door: washer door boot by lg MDS47123605 and washer door boot spring clamp ACA56078801

Last updated: January 2026