What does upside down f and f mean on GE refrigerator?
On the GE GFE24JYKHFFS bottom-mount refrigerator, an upside-down “F” with a normal “F” typically indicates a fast-cooling mode is turned on (TurboFreeze for the freezer). It is a feature status, not a failure code; you can turn it off at the control panel.
What the symbols usually mean
These display characters are commonly used to show quick-cool features:
- TurboFreeze (freezer quick chill): often shows as an upside-down “F” with “F”
- TurboCool (fresh food quick chill): often shows as an upside-down “F” with a “C”
- Normal operation: symbols disappear after the timed boost ends or after you turn the feature off
If the display is also beeping or showing additional letters/numbers, check for an actual diagnostic code using GE refrigerator error codes.
How to turn TurboFreeze or TurboCool off
Try these control-panel steps (common on many GE French door and bottom-mount designs):
- Press the Freezer temp button until TurboFreeze toggles off, or press and hold it for several seconds
- Press the Fridge (fresh food) temp button until TurboCool toggles off, or press and hold it for several seconds
- Wait a few seconds for the display to update
- If the panel is unresponsive, unplug the refrigerator for 2 minutes, then restore power
Why it matters
TurboFreeze and TurboCool run the cooling system harder to pull temperatures down faster after loading groceries or after frequent door openings. Leaving them on can increase energy use and may make the refrigerator sound like it is running more often.
When to suspect a real cooling problem
If the symbols are off but temperatures are still off-target, these are common checks:
| Symptom | Common cause | Parts often involved |
|---|---|---|
| Freezer warm, fridge warm | Airflow or sealed system issue | Refrigerator condenser fan WR60X10209, r600 drier w/ red cap WR87X30875 |
| Fridge warm, freezer OK | Damper or sensor issue | Refrigerator air damper WR60X27396, GE profile refrigerator temperature sensor WR55X10025 |
| Frost buildup, poor airflow | Defrost problem | Refrigerator defrost bi-metal thermostat WR50X10069 |
For ordering, we list model-matched parts for GFE24JYKHFFS on this page; you can also search by model at Sears PartsDirect.
Last updated: February 2026
What is the life expectancy of a GE Monogram refrigerator?
GE Monogram refrigerators last 15 to 20 years. This GE model GFE24JYKHFFS is not a Monogram unit; most GE bottom-mount refrigerators of this type run 10 to 12 years, and maintenance is what pushes you toward the high end.
Typical lifespan comparison
Use this as a practical benchmark when deciding between repair and replacement.
| Refrigerator type | Typical life expectancy | What most affects lifespan |
|---|---|---|
| GE Monogram refrigerator | 15 to 20 years | Coil cleanliness, airflow, door seal condition, water system upkeep |
| GE bottom-mount refrigerator (like GFE24JYKHFFS) | 10 to 12 years | Same factors; heavy compressor run time and poor airflow shorten life |
Maintenance that extends life
These steps reduce compressor strain, prevent temperature swings, and help avoid premature failures.
- Clean condenser coils so the compressor runs cooler and cycles normally.
- Keep doors sealing tightly; air leaks cause long run times and moisture problems.
- Replace the water filter on schedule; for this model, use the GE refrigerator water filter XWFE.
- Avoid blocking air vents in the fresh food section and freezer.
- Address inconsistent temperatures early; a failing sensor can cause overcooling or warming (see GE profile refrigerator temperature sensor WR55X10025).
Signs it is nearing end-of-life
Repeated issues in these areas often mean repairs start stacking up.
- Food spoils faster even after adjusting settings
- Compressor runs almost constantly or gets noticeably louder
- Recurring frost buildup or a freezer that will not stay cold
- Slow water dispensing or inconsistent ice production
- Condensation around doors or a damaged gasket
Why it matters
A refrigerator that runs hot or runs nonstop uses more energy and puts extra stress on major components like the compressor and control boards. Preventive care is the simplest way to protect long-term reliability.
Parts for your refrigerator
For GFE24JYKHFFS, you can order model-matched replacement parts from the parts list for your unit, or search by model number on Sears PartsDirect.
Last updated: February 2026
Where is the drain tube on a GE side by side refrigerator?
On GE refrigerators, the defrost drain tube starts at the drain opening beneath the evaporator in the freezer and carries defrost water down to the drain pan by the compressor. On your GE GFE24JYKHFFS bottom-mount (French-door) refrigerator, you access it from the freezer rear panel and the lower rear machine compartment.
Where to look (GE side-by-side vs. your GFE24JYKHFFS)
Both styles use the same basic routing; the difference is which compartment contains the evaporator.
- Side-by-side GE: drain opening is typically behind the rear panel of the freezer side
- GE GFE24JYKHFFS bottom-mount: drain opening is behind the rear panel of the lower freezer drawer compartment
- All styles: the tube outlet ends above the drain pan in the lower rear (compressor area)
Quick access steps (safe and practical)
Unplug the refrigerator before removing panels.
- Remove freezer bins/drawers for working room
- Take off the rear interior freezer panel to expose the evaporator area and drain trough
- Look for the drain hole centered or slightly offset at the bottom of the evaporator drain trough
- Pull the refrigerator out and remove the lower rear access cover to find the drain pan and tube outlet
- If the drain is iced over, melt ice with warm air on low and flush with hot water
What a clogged drain usually looks like
| Symptom | Common cause | What to check first |
|---|---|---|
| Ice sheet on freezer floor | Drain hole frozen/clogged | Clear the drain opening at the trough |
| Water leaking to fresh-food area | Drain backing up during defrost | Flush the tube from the freezer end |
| Water on floor near front | Overflow or misdirected drain water | Confirm tube outlet drips into drain pan |
Why it matters
The drain tube is the only path for defrost meltwater to reach the drain pan. When it freezes or plugs, water backs up, refreezes, and eventually leaks into the cabinet or onto the floor.
Parts that can contribute to repeat freeze-ups
If the drain keeps icing over, a defrost system problem can be the root cause. A common component to inspect is the refrigerator defrost bi-metal thermostat WR50X10069.
You can order parts for GE GFE24JYKHFFS from the parts list for this model, or search by model number on Sears PartsDirect.
Last updated: February 2026





