Kenmore 79072903012 gas range Parts

On Kenmore gas range model 79072903012, the model and serial number are on the identification plate on the right-hand surface of the oven front frame. You access it by opening the storage drawer, warmer drawer, or broiler drawer (depending on your range configuration); see the 79072903012 owner's manual.

• Pull out and open the storage drawer (if your model has one).
• If there is no storage drawer, open the warmer drawer (some models).
• If there is no warmer drawer, open the broiler drawer (some models).
• Look at the lower right area of the oven frame; the plate is attached to the oven front frame.
• Write down model number, serial number, and any lot number/letter shown.

The plate is more than a label; it helps us match the correct Kenmore range parts and specs.

• Use a flashlight; the plate is often in a shaded spot behind the drawer front.
• Take a clear photo before ordering parts.
• If the label is greasy, wipe lightly with a damp cloth and mild detergent; avoid abrasive cleaners.

Last updated: February 2026

A Kenmore gas range like model 79072903012 typically lasts 15 years with normal household use. Keeping burners clean, confirming proper ignition, and addressing weak igniter or temperature issues early helps you get the full service life from the oven and cooktop.

• Cleaning and airflow: Grease buildup around burners and in the oven cavity increases heat stress.
• Ignition health: Slow or inconsistent lighting makes components work harder.
• Cooking habits: Frequent high-heat baking/broiling and heavy cookware shorten wear parts life.
• Gas quality and environment: Dust in the gas line can cause temporary orange flames; coastal air can also tint flames slightly.
• Timely part replacement: Replacing wear parts (igniters, light bulbs, sensors) prevents secondary damage.

Use the lighting and flame checks in the 79072903012 owner's manual and the setup checks in the 79072903012 installation guide.

• Surface burners should ignite promptly when turned to LITE.
• After air is purged from the gas line, each burner should light within about 4 seconds.
• Confirm you see a steady flame, then turn the knob out of LITE.
• If flames are orange, let the burner run a few minutes; dust can burn off and the flame should turn blue.

A 15-year lifespan assumes routine maintenance and fast fixes. When ignition is slow or temperatures drift, cooking performance drops first, then other components (gas valve, wiring, controls) see extra stress.

Last updated: February 2026

On Kenmore gas range model 79072903012, the cooktop is not removable, so we do not lift off the entire top panel. For cleaning and service access, we remove surface parts (grates, burner caps, and burner heads) and, when needed, pull the range forward after shutting off gas and power; see the 79072903012 installation guide.

• Remove the cooking grates.
• Lift off the burner caps.
• Lift off the burner heads (if your burner style allows it).
• Wipe spills from the cooktop surface and around the burner openings.
• Reinstall parts in the same positions so flames stay even.

If you need access behind or underneath the cooktop area (gas line, power cord, rear panel), we service it by moving the range, not by removing the cooktop.

• Turn all burner knobs to OFF.
• Shut off the gas supply valve.
• Unplug the power cord (or switch off the breaker).
• Pull the range out only as far as needed to disconnect gas and power.
• Reinstall in reverse order, level the range, and check gas connections for leaks.

• Let all surfaces cool completely.
• Avoid reaching over burners; keep flammables away.
• Never use the oven or cooktop area for storage.

• Confirm all burner caps sit flat.
• Test each surface burner for a steady blue flame.
• Verify the range is stable and protected by the anti-tip bracket (details in the 79072903012 owner’s manual).

Trying to lift a non-removable cooktop can bend panels, damage gas tubing, or create a gas leak risk. Using the correct access method protects the burner system, wiring, and anti-tip safety setup.

Last updated: February 2026

If your Kenmore gas range model 79072903012 oven is not working, the most common causes are a power or control setup issue (clock not set, wrong mode selected), a gas supply issue, or a failed ignition system. Start with the quick checks in the 79072903012 owner's manual.

• Confirm the range has power; the display and oven controls must be on.
• Set the time of day; this model requires the clock to be set before the oven will operate.
• Verify you selected Bake or Broil correctly and pressed Start.
• Make sure the gas supply is on; confirm the regulator gas valve is turned to ON.
• If you recently had a power outage, reset the clock and try the oven again.

The control is detecting a fault condition.

1. Press STOP to clear the code.
2. Unplug the range (or switch off the breaker) for 5 minutes.
3. Restore power, set the clock, then try Bake or Broil again.

If the surface burners work but the oven will not light, the oven igniter is a top suspect.

• Weak or failed igniter: consider the tappan range oven burner igniter 316489403
• Temperature sensing problems (erratic temps, shuts off early): consider the frigidaire range oven temperature sensor 316490000

On gas ovens, ignition and control setup determine whether the gas valve opens and the burner lights. Fixing a simple clock or power issue first prevents unnecessary part replacement and gets you back to safe, reliable baking.

Last updated: February 2026