Kenmore Elite 79629278001 washer Parts

Your washer’s model is the number printed on its identification plate. For Kenmore Elite washers like model 79629278001, the ID plate is typically located inside the washer lid; match the full model number on that label to confirm you have the correct parts list and manual for your exact unit.

Where to find the model number on this washer

Check these common label locations (start with the first one):

• Inside the washer lid on the identification plate (most common for this model family)
• Along the top edge of the cabinet opening under the lid
• On the back of the control panel area
• On the side of the main cabinet near the bottom edge

If you see a model like 796.292796 in documentation, that is a series reference; your appliance label will show the full model number (for example, 79629278001).

How to read the label so you get the right parts

Use the model number exactly as printed, including all digits.

• Write down the full model number (example: 79629278001)
• Record the serial number too (helpful for production variations)
• Use the full model number when selecting parts such as a lid lock, inlet valve, or drain hose

Quick check table

What you see	What it means	What to do
79629278001	Your exact washer model	Use this model for parts and troubleshooting
796.292796	Model series shown in the guide	Keep looking for the full model on the washer label
Serial number	Production identifier	Save it for service and part matching

Why it matters

Kenmore model numbers in the 796 family can look similar, but small differences change which components fit (for example, a washer lid lock EBF61674802 or lg washer water inlet valve 5221EA1008F). Using the exact model number prevents ordering the wrong part and helps you follow the correct procedures in the owner's manual.

Last updated: February 2026

Yes. The Kenmore Elite 79629278001 is positioned as a premium, feature-rich top-loading washer, with upgrades like a lid lock, soft close lid, tempered glass lid, an LED display, and a stainless steel tub designed for durability. See the owner's manual for the full feature list and cycle details.

What makes this model “high end”

These are the premium design and performance features called out for this Kenmore Elite washer:

• Ultra-capacity stainless steel tub for durability
• Rear control panel with LED display for cycle status and time remaining
• Lid lock for safety during operation
• Soft close lid and tempered glass lid for quieter, controlled closing and visibility
• Water-saving rinse design (SmartRinse with jet rinse on select cycles)

Key specs at a glance

The manual lists these core specifications for the 796.292796 platform used by this model series:

Spec	Value
Type	Top-loading washer
Electrical	120 VAC, 60 Hz
Dimensions (W x D x H)	27 in x 28 3/8 in x 45 3/8 in
Height with lid open	55 3/4 in
Net weight	145.5 lb

Why it matters

“High end” usually means you are paying for better usability, quieter operation, and more durable core components. On the 79629278001, those upgrades show up in the tub material, lid design, and control/display features, plus rinse-water management that can improve efficiency on everyday cycles.

When a “high end” washer still needs parts

Even premium washers wear over time. If you are troubleshooting performance issues, these model-matched parts are commonly involved:

• No spin, motor errors, or intermittent drive issues: washer motor rotor position sensor 6501KW2002B
• Won’t fill correctly or overfills: lg washer water-level pressure switch 6501EA1001R
• Won’t start or lid won’t lock: washer lid lock EBF61674802

Last updated: February 2026

On a Kenmore washer, the OE error code means the washer is not draining properly. On your Kenmore Elite 79629278001, OE usually points to a restriction in the drain path or a drain system problem that keeps water from pumping out within the allowed time.

What to check first (fast, no-parts steps)

• Cancel the cycle and wait for the tub to stop moving.
• Unplug the washer for safety before inspecting hoses or wiring.
• Check the drain hose for kinks, crushing, or an extension that is too long.
• Confirm the drain hose is installed at a proper standpipe height and not sealed airtight into the pipe (it needs airflow to drain correctly).
• If the tub is full, remove water carefully (shop vac or shallow pan method) before disconnecting hoses.

Common causes and the most likely fixes

What’s happening	What you’ll notice	What usually fixes it
Drain hose restricted	Slow drain, gurgling, intermittent OE	Re-route or replace the hose
Pressure sensing issue	Overfilling, stopping mid-cycle, OE after fill	Inspect pressure hose; replace switch if needed
Drain system not moving water	Standing water, no pump-out sound	Check for blockage; service drain components

Parts that can be involved on model 79629278001

If the hose is damaged or collapsing internally, replacing it is a solid next step: washer drain hose AEM73213001.

If OE happens along with odd fill levels (too much or too little water), the water level sensing circuit is a common suspect:

• Lg washer water-level pressure switch 6501EA1001R
• Washer water-level pressure switch hose 5210FA3427J

Why it matters

A washer that cannot drain will pause or end cycles with wet laundry, and repeated drain failures can lead to odor, poor rinse performance, and extra wear on drain components.

Where to find model-specific guidance

We recommend following the troubleshooting and safety steps in the owner's manual for Kenmore Elite 79629278001, especially before accessing internal components.

Last updated: February 2026

Yes. Repairing your Kenmore Elite washer model 79629278001 is worth it when the failure is a single, replaceable part and the tub and drive system are still solid. If the repair total is about half the price of a comparable new washer, replacement is the better value.

Quick decision checklist

• If the washer is under 8 years old, repair it.
• If it is over 10 years old, compare the total repair cost to replacement cost.
• If the tub is leaking or the cabinet is badly rusted, replace it.
• If you have one clear symptom (no fill, no drain, no spin, no lock), repair it.
• If multiple major drive parts failed at once, compare costs closely.

Repairs that are commonly worth it on this model

Targeted fixes often restore normal operation without a full rebuild:

• Won’t start or won’t lock: washer lid lock EBF61674802
• Slow fill or no fill (after cleaning inlet screens): lg washer water inlet valve 5221EA1008F
• Leaking or draining problems at the back: washer drain hose AEM73213001
• Spin or motor feedback issues: washer motor rotor position sensor 6501KW2002B

Repair vs. replace examples

What failed	Typical impact	Usual choice
Lid lock, valve, hose	Lower cost, fast repair	Repair
Stator or rotor drive parts	Higher parts cost	Compare
Tub leak or major tub damage	High labor, major teardown	Replace

Why it matters

A correct diagnosis keeps you from buying unnecessary parts and can extend the washer’s service life. Start with the symptom-based checks and maintenance steps in the owner's manual before ordering.

Last updated: February 2026