KitchenAid KDPS624SPS0 dishwasher Parts

KitchenAid model KDPS624SPS0 does not come with a lifetime warranty as standard coverage. Typical coverage for this dishwasher is a one-year full warranty from the purchase date for defects in materials or workmanship when it’s operated and maintained as instructed.

In most KitchenAid dishwasher warranties, the one-year full warranty period includes:

• Replacement parts needed to correct defects in materials or workmanship
• Repair labor to install those parts
• Coverage that starts on the original purchase date
• Coverage that applies when the dishwasher is used and maintained properly

Warranty terms can vary by model series and by what was included at purchase. We recommend confirming these details in your warranty documentation:

• Exact start date (purchase date vs. delivery/installation date)
• What counts as normal wear vs. a defect
• Any exclusions (for example, cosmetic issues or damage from installation conditions)
• Whether any components have extended or limited coverage beyond one year

If you’re troubleshooting a leak, no-fill, or no-start issue on KDPS624SPS0, warranty status affects whether you should focus first on documentation and service options or move straight to DIY diagnosis and replacement parts such as a latch assembly (includes switch) W11412299 or fill valve assembly W11434044.

For symptom-based troubleshooting, we also use the KitchenAid he dishwasher error codes reference to match what the dishwasher is reporting to likely causes.

Last updated: February 2026

For the KitchenAid KDPS624SPS0 dishwasher, the most common problems we see are poor cleaning (food left on dishes), not draining, or not starting. These issues are usually tied to a clogged filter, a blocked or damaged spray arm, or a door latch that is not fully engaging.

• Dishes still dirty or gritty: clogged filter, restricted wash system, or spray arm issues
• Standing water in the bottom: drain path restriction or a drain hose problem
• Won’t start or stops mid-cycle: door not latching, control not sensing a closed door
• Leaks at the bottom of the door: worn door seal or door not closing squarely
• Weak wash action or unusual wash noise: circulation system restriction or pump-related issue

1. Remove and rinse the dishwasher filter; clear debris from the sump area.
2. Spin the spray arms by hand; make sure they move freely and the holes are not plugged.
3. Confirm the door closes firmly; check for dishes or racks preventing full closure.
4. If it won’t drain, check the sink drain connection and make sure the drain hose is not kinked.

A restricted filter or spray system reduces water flow and wash pressure, so detergent cannot do its job. A weak door latch signal can prevent the control from running the cycle at all. Fixing the root cause early also helps protect the pump and motor from strain.

If you’re seeing flashing lights or a code, use our KitchenAid microclean he dishwasher error codes guide to match the symptom to the most likely failure.

Last updated: February 2026

KitchenAid dishwashers typically last 10 to 12 years on average. With normal household use and basic upkeep, many units reach 9 to 14 years, and the real difference usually comes down to water quality, cleaning habits, and whether small issues (like leaks or poor draining) get fixed early.

Most KitchenAid dishwashers, including model KDPS624SPS0, fall into the same general life range. These factors have the biggest impact:

• Hard water and scale buildup (can stress the fill system and wash components)
• Filter and sump maintenance (food debris left in the system increases wear)
• Door sealing and leak prevention (small leaks can cause bigger failures over time)
• How often you run it (multiple loads daily shortens overall service life)
• Early repair of common wear parts (prevents secondary damage)

A few routine steps make a measurable difference in how long a dishwasher lasts:

• Clean the filter regularly; replace it if it is damaged or won’t come clean (see dishwasher filter W11568785).
• Run a periodic cleaning cycle to reduce grease and mineral buildup.
• Check spray arms for clogs and damage; poor spray increases cycle time and strain (see dishwasher spray arm, lower W11550888).
• Watch for slow filling or no-fill symptoms; a weak inlet valve can cause repeated wash issues (see fill valve assembly W11434044).
• Fix draining problems quickly; standing water can damage seals and the pump system.

Once a dishwasher gets past about 10 years, small problems (leaks, poor wash performance, slow draining) tend to cascade into larger repairs. Keeping the wash system clean and addressing water-in and drain issues early is the best way to extend the service life of your KDPS624SPS0.

For troubleshooting symptoms that shorten lifespan, we recommend starting with how to clean and maintain your dishwasher.

Last updated: February 2026