Haier Portable air conditioner Parts — Browse All Models

Operating tips for your Haier portable air conditioner

• Use a 120-volt, 15-amp electrical outlet for the air conditioner. Don't use any other electrical appliances on the same circuit or the house circuit breaker may trip. Use a dedicated circuit for this air conditioner if possible.
• Don't place the air conditioner in direct sunlight or close to any heat sources such as ovens or stove.
• Position the portable air conditioner on a flat surface at least 1-foot from the wall.
• When operating the air conditioner in high humidity conditions, empty the water tank when the warning light turns on.
• Clean the air filter weekly so the air conditioner operates efficiently.

Haier portable air conditioner common replacement parts

• Remote. The remote device allows you to turn the air conditioner on and off or change settings from a remote location when the remote is within range of the air conditioner.
• Air filter. The air filter traps dust, dirt and debris before it enters the air inlet of the portable air conditioner.
• Electronic control board. The electronic control board controls the major electro-mechanical components in the air conditioner. The electronic control board receives input from temperature sensors to monitor the temperatures inside the room and at the evaporator. With this information, the electronic control board manages the on/off cycling of the compressor to cool the room to the set temperature. The electronic control board activates the compressor and fans when it senses that the room temperature exceeds the set temperature.
• Thermistor. The thermistor is a temperature sensor in the portable air conditioner that sends information to the electronic control board.