Companion power sander repair and replacement parts

Charging the battery for your Companion power sander

• Plug the battery charger outlet cord into the wall outlet before inserting the battery onto the charger.
• Slide the battery onto the charger. Make sure that the battery is fully seated on the charger.
• The red LED light will blink constantly to indicated that the battery is fully seated and the battery charging process has begun.
• The battery is completely charged when the red LED lights remains on constantly.
• The battery can be left in the charger without harming the battery.
• To remove the battery, press the battery release button and slide the battery off the charger.

Electrical safety precautions to follow when using your Companion power sander

• The power sander power cord plug must match the receptacle on the electrical wall outlet. Never modify the power sander power cord plug in any manner. Don't use an adapter plug with an earth grounded power sander.
• Don't expose the power sander to rain or wet conditions. Water entering the power sander will increase the risk of electric shock.
• Check the condition of the power cord before using the power sander. Repair damaged wires in the power cord or replace the power cord if it's damaged before using the power sander.
• When operating the power sander outdoors, use an extension cord rated for outdoor use to prevent the chance of electrical shock.
• If operating the power sander in a damp location or around a water source, use a GCFI protected power supply.