Official NordicTrack weight system parts

Common replacement parts for Nordictrack weight systems

• Weight cables. Weight cables attach lifting components to the weight stacks to provide resistance during lifting.
• Weight cable pulleys. Weight cable pulleys attach to the weight system frame and help guide cables from the lifting components to the weight stacks.
• Weight stack carriage. The weight stack carriage holds, supports and aligns the stack of weights so the weights remain stable during lifting.
• Fasteners. Fasteners such as bolts, nuts, screws and pins hold the various lifting components of the weight system together.

Tightening the cables on your Nordictrack weight system

• Cables stretch over time so inspect the slack in all weight system resistance cables before using the weight system each time.
• Tighten any loose cables to eliminate slack before using the weight system. Don't overtighten the cables.
• To tighten cables that use a bolt and locknut adjustment, slide the cable stop away from the cable clip. Use a pair of pliers or a screwdriver to tighten the locknut on the bolt that goes into the cable clip to shorten the cable and remove slack. Slide the cable stop against the cable clip.
• To remove slack from a cable with adjustable sets of holds in a U-bracket, remove the nut and bolt that hold the adjustable cable pulley in place and move the bolt up to hold the pulley in a higher set of holes to remove cable slack. Reinstall the nut and tighten it firmly to hold the bolt and pulley in place.